Reviews Battery Connector

XT30 XT60 Balance Board RC Lipo Battery Parallel Charging Board,2 in 1 PG Parallel Charging Plate XT30 XT60 Plug Supports 4 Packs for 2S-6S Lipo Battery

  • 2 in 1 lipo battery parallel charging board lipo charger,supporting XT60 connector and XT30 conector lipo battery.It is just a parallel charging board, not a diret charger, need to connect with a charger which support the balance port ( JST connector).
  • Thicken PCB copper foil, allow security using 35A charging current..
  • This lipo balance charging board supports up to four packs of the same type, same cells 2S-6S lipo battery pack,such as 2S lipo battery,3S lipo battery ,4S lipo battery,5S lipo battery,6S lipo battery..
  • Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.
  • Output Connector:XT30 connector /XT60 connector,support xt30 and xt60 lipo batteries..
Check Stock

Bulldog Smart Airsoft Battery Charger for 8.4v to 9.6v Ni-MH / Ni-CD [Compact]

  • Peak performance pack - Tenergy’s high performance batteries provide more playtime.
  • our 8.4V 3800mAh NiMH rechargeable battery made of 7 cells Sub C NiMH batteries..
  • Ideal AEG battery power – Tenergy 8.4V NiMH battery designed to fit M16, SR16, full stock AK series, and full stock MP5 series: G&P M16A1, KNIGHTS SR16, MP5 SD5, MK5A4, G3 SD1, M16VN, CA G3 SG1, G3 A3, FAMASF1, M1A1, ASSV, PSG1 and RC cars/planes with Standard Tamiya Connector. For upgraded and/or modified AEGs, we recommend finding connector and measuring the gun compartment for best fit..
  • Fast charge and lasting capacity - Tenergy's AEG battery features rapid charge up, long runtime, and compatibility with the Tenergy 6V-12V RC battery charger..
  • Battery pack configuration - Tenergy electric gun battery dimensions: 6.13" (length), 1.9" (width) and 1.0" (height). Weighs 15.2 oz..
  • Large Tamiya connector - The airsoft replacement battery pack with Tamiya battery pack connector, standard Tamiya female connector assembled with 16 G wire..
Check Stock

UpBright 5V AC/DC Adapter Compatible with Novatel Verizon Wireless MiFi 4510L 4620L 5510L 6620L 6620LE 2200 Jetpack 4G LTE Mobile Hotspot Netgear AC791L Ellipsis MHS700L MHS800L MHS815L MHS900L

  • First adjust the push plate to accommodate the size of your battery (battery not included).
  • The push plate can be pull down fit various size battery (up to 76mm) as shown in the picture.
  • Place the battery on the push plate and align the 2 adjustable connector pong with the battery -/+ (If you can not identify the -/+ on the battery, it is usually the first and last charge connector on the battery).
  • Simply plug the dock to a power oulet to start charging your battery..
  • Charge status indicator LED ( Red LED indicate charging, Green indicate idle).
  • If Red LED does not indicate, please properly adjust the 2 -/+ pongs connector with the battery -/+. If the battery have 3 or 4 charge connector, the -/+ are usually the first and last charge connector of the battery..
Check Stock

ORCISH Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer (White)

  • Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Easily installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

ZZcell Battery For Honeywell Alarm Lynx L3000, Lynx L5000, Lynx L5100, 300-03864-1 1500mAh (NOTE: Battery Connector - 2 Prong)

  • Volts:7.2Volts / Type: Ni-MH- (NOTE: Please Check Connector Image For Compatibility) (NOTE: Battery Connector – 2 Prong).
  • Capacity: 1500 mAh ( Battery will fully charge after installation ).
  • Compatible Part Numbers: Honeywell Lynx L3000, Lynx L5000, Lynx L5100 (NOTE: Please Check Connector Image For Compatibility) (NOTE: Battery Connector – 2 Prong).
Check Stock

Buachois 2 Sets 50A 6AWG 600V Battery Connector Plug Lightweight Quick Connect Disconnect Wire Harness Plug Kit Towing Winch Quick Connect Systems(Black)

  • Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Size information: voltage: 12-36 volts DC.
  • package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Convenient installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 pieces terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging

  • Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
  • Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
  • This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
  • Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
  • Package Contains: 1x SKYRC B6 mini Charger.
  • 1x T Plug with Banana connector Charging Cable.
  • 1x DC Cable with Alligator Clip Charging Connector.
  • 1x T Plug with Alligator Clip connector Charging Cable.
  • 1x T Plug with Futaba connector Charging Cable.
  • 1x T Plug with JST connector Charging Cable.
  • 1x T Plug with XT60 connector Charging Cable.
Check Stock

uxcell 3pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Long

  • Package Content: 3pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 10pcs DC 9V Battery Clip T-Type Buckle Connector Faux Leather Housing Lead Wire 12cm Length

  • Package Content: 10pcs x Battery Clip Connector.
  • Buckle Size: 28 x 21 x 6mm / 1.1" x 0.83" x 0.24" (L*W*H).
  • 9V battery clip connector, T-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 12cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock

uxcell 7pcs DC 9V Battery Clip I-Type Buckle Connector Faux Leather Housing Lead Wire 14.5cm Length

  • Package Content: 7pcs x Battery Clip Connector.
  • Buckle Size: 30 x 16 x 6mm / 1.18" x 0.63" x 0.24" (L*W*H).
  • 9V battery clip connector, I-type faux leather housing, 2 wire connector..
  • Simple operation, compact size, replacements for replacing your old or damaged ones..
  • 14.5cm stripped and tinned leads, 1 red and 1 black for easy identification and soldering terminal connector for 9-volt battery or for DIY projects..
Check Stock