Reviews Battery Connector For Arduino
Pack of 2 6V Power Box 4xAA Battery Holder Case with DC Connector Compatible with Barrel Jack Connector for Arduino
- The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
- The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
- The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
- Package includes: 2 x 4xAA Battery Holder Case.
Check Stock5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks
- Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
- Use: Can be conveniently connected to other power module or Arduino board..
- Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
- Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
- Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check StockDZS Elec 6pcs 15CM 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable With 5.5x2.1mm DC Male Plug for Arduino Project or LED Light Bar
- Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
- Standard 5.5x2.1mm DC Male Plug, conveniently connect to other power module or Arduino board..
- Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect to other equipment..
- Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
- Package: 6pcs 9V T Type Battery Snap Connector with DC 5.5x2.1mm Male Plug (NO battery included).
Check Stock10 Pack 9V Battery Clip Connector, T Type Faux Leather Long Cable Housing Connection
- Proper design: these 9 Volt battery clip connectors are designed simply with bare ends, which is convenient to install to replace a broken battery connector on your electronic device without applying wire strippers.
- Application: you can apply these connector clips for power supplies or other devices.
- They also can serve for DIY battery holders with the same battery clip connectors, and great for LED strip lights or Arduino.
- Good material: the battery connectors adopt sturdy plastic housing and metal material, which plays a useful protective role, and allows the item not to break easily.
- Simple operation: compact size, ideal replacements for replacing your old or damaged ones..
- Package: includes totally 10 pack 9 Volt battery clip connector buckles.
Check StockBattery Case Holder with Lead Wire Bundle,6PCS 9 V Battery Clip Connector T-Type 9 Volt Battery Clip with 2.1 x 5.5 mm Male DC Power Plug for 9V Battery Connector for Arduino DIY
- Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: T-type Terminal with Leather Shell,Super Tight Snap Head..
- 9V battery clip connector T-type with 2.1 x 5.5 mm male dc power plug for arduino diy..
- The 9v battery clip connector is made of solid plastic and metal, which is not easy to break and has good contact performance, without risk of electric leakage..
- Each 2.4 x 1.2 x 0.7cm, 9V battery clip connectors with 2.1 x 5.5 mm male dc power plug (not including 9 V batteries)..
- This 9 volt battery clip t-type with 2.1 x 5.5 mm male dc power plug is widely used in student experiment, LED strip lights, or arduino or other devices with a 9V battery..
Check StockAA Battery Holder Besmelody 4 x 1.5V 6V AA Battery Storage Box with 9V Snap Clips Connector Plastic Housing 2 Layers Battery Case
- AA battery holder with 9V snap connector is designed for 4-slot 1.5V AA standard or rechargeable batteries.
- 4 AA Battery Holder Body Size: 6 x 3 x 3cm /2.36" x 1.18 " x 1.18 "(L*W*H).
- Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
- Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
- Package Contents: 2x 4 AA Battery Holder.
- Besmelody 18-month warranty and friendly customer service..
Check Stock4xAA Battery Pack Holder Case Box to DC Barrel Jack Connector Compatible with Arduino(Pack of 2)
- The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
- The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
Check StockAridea Rechargeable Lithium Ion Battery Pack - 3.7V 6600mAh 3.9 inch 10cm Cable JST PH Connector Blue 1.0
- 6600 MAH CAPACITY- 3.7V battery- Provide power for Raspberry Pi and Arduino systems, as well as many other products.
- BUILT-IN OVER/UNDER CURRENT PROTECTION CIRCUIT- Automatic protection from low voltage drain or overcharging damage (2.75V cut-off).
- 10cm (3.9 INCH) BATTERY CONNECTOR CABLE- Provides placement flexibility, along with a genuine JST 2-Pin connector.
- DIMENSIONS and WEIGHT- 65mm L x 54mm H x 18mm D, 150g = 2.55 inch L x 2.125 inch H x 0.70 inch D, 5.29 oz.
Check Stock2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries
- Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
- Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
- Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
- With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
- ! ! ! Not fit for Arduino Nano, Effect pedals..
- Any quality issues, please feel free to contact us..
Check Stock6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries
- Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
- Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
- With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
- Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
- Not fit for Arduino Nano, Effect pedals..
- Any quality issues, please feel free to contact US..
Check Stock