Reviews Barbed Tank Fittings

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock

300Pcs Barbed Connectors Irrigation Fittings Kit HOINCO Drip Irrigation Barbed Connectors for 1/4 Inch Tube for Flower Pot Garden Lawn Elbows End Plug Straight Barbs Tees 4-Way Coupling

  • 【Barbed Connectors Irrigation Fittings Kit】：300Pcs irrigation kits total, including 100Pcs straight barbs, 80Pcs tees, 40Pcs oblique barbed elbows fittings, 40Pcs end plug, 40Pcs 4-way coupling. Drip irrigation connectors can save the water needed for irrigation in an efficient way and easily pass water to anywhere, bringing more convenience for your life..
  • 【Drip Irrigation Barbed Connectors 】：Drip irrigation barbed connectors are made of high-strength plastic, which has a long service life and is not easy to fold and deform. The sufficient quantity is enough for your daily use and replacement..
  • 【Suitable Size】：These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. (Suitable for 4mm ID 7mm OD tube). Our drip irrigation accessories help to build a practical and useful irrigation system. Please check the size carefully before purchasing..
  • 【Easy to Install】：Directly insert the irrigation fittings kit at the end of the pipe, without tools or glue, making gardening more convenient and efficiently. If convenient, you can also use a heat gun or hair dryer to soften the end of the tubing before inserting..
  • 【Wide Applications】：Suitable for gardens, patio, lawn, flower beds, terra....
Check Stock

Weld on Bung 12AN Hose Barb Aluminum Nipple 3/4 inch Barbed Weldable Pipe Adapter Fittings

  • 3/4" (AN 12) hose barb weld in bung adaptor nipple Barbed Weldable for Oil Cooler / Turbo Charger / Braking.
  • Most commonly used when needing to attach AN lines to areas that don't currently have an AN flare.
  • A few examples would be: Intercooler piping, Intake manifold, or even a custom overflow tank.
  • All of our weld on fittings have minimal anodizing to ensure proper and ease of welding.
Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • ...l, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..
Check Stock

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

  • ★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
  • ★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
  • ★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
  • ★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

Mudder 100 Pieces 1/4 Inch Straight Barbed Connectors Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens.
  • How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm.
  • No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing.
  • Long term to use: made of quality plastic, this drip irrigation barbed coupling is water and rust resistant, not easy to fade or deform, sturdy and durable to use, which can work as practical fitting for your drip irrigation tubing system for a long time.
  • Sufficient quantity: 1 package comes with 100 pieces of 1/4 inch single barbed connectors, sufficient quantity to use or take as backup, sharing some with close people in your life will also be nice, they are practical fittings for tubing.
Check Stock

EcoPlus Eco 185 Water Pump Fixed Flow Submersible Or Inline For Aquariums Ponds Fountains & Hydroponics - UL Listed 158 GPH Black

  • Included fittings: . 75" Barbed x . 625" Threaded, two-. 5" Barbed x . 625" Threaded and . 375" Barbed x . 625" Threaded.
  • Suitable for installation on dry land for in-line use or submersibly into the water.
  • Suitable for use in hydroponic systems, ponds, fresh and saltwater aquariums, fountains and filter systems.
Check Stock