Reviews Ball Screw Actuators

Awoco Heavy Duty Door Micro Switch for Air Curtains from Awoco Welbon Pioneer Maxwell or Mars TZ-6001

  • Built-in CM miniature limit switch, strong aluminum cast shell, design for water-proof and oiled proof.
  • It is the same as CM Micro Switch in the rated value and characteristics.
  • Various of actuators that are taken convenience for using.
  • Each switch is equipped with cable fixator,including rubber boot,metallic waster,plastic screw nut.
  • Model: TZ-6001, for Air Curtains Door Access. 220V / 110V @ 15A.
Check Stock

JSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)

  • Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
  • Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
  • Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
  • Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
  • Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.
Check Stock

CNCCANEN Ballscrew SFU1204-300mm with BK10/BF12 + SBR12-300mm Linear Rail Guide Set SBR12UU Block Bearing Sliding Shaft Rod Kit for CNC Machine DIY

  • High service life time due to low friction.
  • Ball screw diameter:12mm, ball screw pitch:4mm, ball screw length:400mm(15.75 inch).
  • The total length is 400mm and the effective ball screw length is 335mm.
  • Do not remove the ball screw nut from the ball screw, because it is matched, or it will be difficult to install it again.
Check Stock

Zeberoxyz 1PCS SFU1605 Ballscrew Nut Diameter 16mm 5mm Pitch Ball Screw Single nut for 1605 nut housing Bracket CNC Carving Machine Parts

  • Material:The ball screw is made of high-quality bearing steel material, high service life time due to low friction.
  • low operation noise, Compact design for easy installation and removal.
  • Dimensions:Ball screw nut inner diameter:16mm, Lead: 5mm,outer diameter:28mm,flange diameter:48mm,Height: 42mm, ball screw nut pitch:5mm.
  • Function:The main function of this ball screw is to convert rotational motion into linear motion with high accuracy, reversibility and high efficiency,No stick-slip effect.
  • Package Content:1PCS Ball Screw Nut SFU1605, 1PCS Black Rod.
  • Widely used:Applicable to SFU1605 ball screw, easy to install.
Check Stock

Befenybay Ball Screw Nut TBI SFU1605 (Diameter 16mm Pitch 5mm) for CNC Machine Parts

  • 【 Material】High quality bearing steel material,high service life time due to low friction.
  • 【Widely Used】It fits for SFU1605 Ball Screw, easy and quick to install.
  • 【Dimensions】Ball screw nut inner diameter:16mm, outer diameter:28mm,flange diameter:48mm,Height: 42mm, ball screw nut pitch:5mm.
  • 【Package Include】1pcs Ball Screw Nut SFU1605 , 1pcs Black Rod.
  • 【Function】The main function of this ball screw is to convert rotational motion into linear motion with high accuracy, reversibility and high efficiency.
Check Stock

SFU2005 300mm Ballscrew kit + Set BK/BF15 Kit + 2005 Ballscrew RM2005 L300-1000mm ball screw with Ball Nuts + Screw Nut Housing for CNCRouter Machine

  • 【Package Include】- End Machined ballscrew SFU2005-300mm/11.81inch length with nut + BK15/BF15 end support with locknuts and circlips + 2005 Ball nut housing..
  • 【Basic Description】- SFU2005 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK15 and BF15, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 2005 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU2005 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation d....
Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 500mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

  • 【Package Include】- End Machined ballscrew SFU1605-500mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
  • 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....
Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 1000mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

  • 【Package Include】- End Machined ballscrew SFU1605-1000mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
  • 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devi....
Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 350mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

  • 【Package Include】- End Machined ballscrew SFU1605-350mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
  • 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....
Check Stock

RATTMMOTOR SFU1204 Ballscrew Kit, SFU1204 RM1204 Ball Screw 400mm Length + Ball Screw Nut Housing+BK10/BF10 End Support +Ballscrew Nut Housing for CNC Router Engraving Machine Milling Machine

  • 【Package Include】- End Machined ballscrew SFU1204-400mm length with nut + BK10/BF10 end support with locknuts and circlips + 1204 Ball nut housing..
  • 【Basic Description】- SFU1204 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK10 and BF10, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1204 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devices, et....
Check Stock