Reviews Back Saw

QWORK Multifunction 12” Mitre Box with 14” Back Saw 45° hole slot

  • Size: 12" Mitre Box , 14" Back Saw, 45° hole slot..
  • Durable: The saw blade is made of premium steel, double-sided mechanical grinding, wear-resistant, and absolutely sharp..
  • Ergonomic design: The handle of the saw is made of ABS engineering plastic and TPR plastic for a comfortable grip and save labor..
  • Safe to Use: The gap of the chute box is 2cm, the thickness of the saw is 1.2cm, when using the saw, the saw will not cut into the box..
  • Use Tip: Use the sides of the box to line your saw up with the correct angle. Score your cut with the saw first, making sure the cut will be on the waste side of the mark. Then, proceed to use the saw normally to cut through your piece..
Check Stock

Half Blind Dovetail Kerfing Tool Extender, 0.025” Thick Blade Ground Square, Folded Solid Brass Back, Beech Handle 468228

  • This Kerfing Tool works by deepening the angled saw kerf in the area where the saw blade cannot reach greatly simplifying cleaning out the waste between pins..
  • To use, saw out the pins, being sure to cut to and not past your scribed lines. Drop the Kerfing Tool in the saw kerf, and gently strike the brass back with a wooden mallet to cut away the material remaining in the corner of the angled saw cut. Stop when you reach the bottom of your saw cut or scribed line. Take several small bites to prevent splitting the wood..
  • This Kerfing Tool has a hardened blade that is ground square and sharp, and can be easily sharpened with a fine file..
  • The kerf plate is 1.125” deep, 3” long and 0.025” thick, the same thickness as most dovetail saws. The back is folded solid brass..
  • The handle is stained beech with a solid brass ferrule. Overall length is 8.5”..
Check Stock

Chainsaw Sharpener with 4Pcs Whetstons Chain Saw Blade Teeth Sharpener Bar Mounted Chainsaw Sharpener Universal Fast-Sharpening Stone Grinder Tools for 14/16/18/20 Inch One/Two Holes Chain Saw Bar

  • Easy Operation: open, attach on the 2 holes, close and push the lock, then gently squeeze down until the saw touches the whetstone. In order to suit different types of chains, chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it..
  • Safe and Fast: This chainsaw sharpening kit is easy to use and protect your hands from harm.Your hands don't need to touch the whetstone, just squeeze the chain saw, the chainsaw can be sharpened in seconds..
  • Lightweight: The new chainsaw teeth sharpener provides a simple and fast method of sharpening the saw chain.It can be used at any time. Lightweight and easy to carry, the chain saw sharpening tool is easy to use outdoors, The solid board will protect your hands from harm..
  • Package: 1 chain saw sharpener and 4 whet stones. The whetstone is detachable. GREAT for husbands, fathers, woodworkers, carpenters, loggers, emergency personnel, firefighters, and more..
Check Stock

Saw Palmetto Supplement 1000mg with Pumpkin Seed, 3-1 Formula,120 Capsules | Promotes Prostate Health | DHT Blocker | Hair Growth Vitamins, Maintain Normal Urinary Frequency

  • Ultra Strength - Saw Palmetto complex 1000mg, saw palmetto extract 45% fatty acid added with saw palmetto berry powder, 120 capsules, plus pumpkin seed powder - a premium prostate supplement, rich in phytosterols..
  • Goodbye to Hair Loss - Study shows that saw palmetto will help to balance the DHT level in human body to prevent hair loss..
  • Balance Frequent Urination - Saw Palmetto Extract supports reduced urination frequency, which will promote sleep quality and stop running "too much" to the bathroom..
  • Quality Ensured - Gluten free, diary free, Non-GMO, No preservatives, No tree-nuts, No sugar, 3rd party tested.
  • Money Back Guarantee - 60 Days Unconditional Money Back Guarantee.
Check Stock

Makita E-00072 14\ Guide Bar, 3/8” LP.043”

  • ... saw chain grinding fixture to make your chain saw as sharp as new, making your work more time-saving and labor-saving!.
  • 【Intimate & Perfect Design】 - In order to suit different types of different hole chains, chain saw sharpener are designed with 2 holes for fixed sharpening, one hole fixed and the other moving back and forth, very flexible. Check in advance your chainsaw blade whether have two holes. If your saw blade is a single hole, you can remove the sliding rivet that can be moved back and forth, then install and use it..
  • 【Easy To Use】 - It is as easy to use as a pencil sharpener.
  • just set the clamp to the rod, position the pawl on the tooth, insert the burr into the guide sleeve, and turn the handle.Use it to precisely sharpen the chain of a chain saw to sharpen the chain and make gardening work smoother. Made of high-quality alloy material, it is durable and more sturdy..
  • 【Easy to Install】 - The chain saw sharpening tool is installed in the sharpener and can be installed and used at any time so that your chain can be sharpened in a short time. Keep oil on the chain and rails to reduce friction and extend service life..
  • 【Perfect Choice】 - Every time you grind a tooth, you only need to pull the chain.The precise sharpening can ensu....
Check Stock

Nordic Pocket Saw Rope Saw - High Limb Chainsaw with Two Sided Teeth - Use up to 27' - Pocket Chainsaw with 32' Ropes - Tree Trimming Rope Saw - Rope Chainsaw High Limb - Chainsaw on a Rope

  • ...NAL TEETH ON BOTH SIDES – It does not matter how the rope saw lands over the branch, you will always be ready to start sawing immediately. The self-cleaning teeth keeps the cut free from pulp and prevents you from getting stuck. The bi-directional teeth also cuts in both directions when pulling the rope chain saw back and forth, this ensures a powerful and quick saw motion..
  • DESIGNED TO BE OPERATED BY 2 PERSONS – To fully utilize this tree pruner ’s potential, we strongly recommend you operating it together with an adult friend. With other words, this portable saw should not be used alone. When operating it alone the angle of the chain is very tight, this makes it getting stuck more easily in the wood..
  • 2 in 1 – USE THE FOLDABLE CHAINSAW ABOVE AND ON THE GROUND – Detach the long straps from the saw chain and use the pocket chainsaw on the ground. Perfect to bring as a camping saw for your outdoor activities. Having this manual chainsaw together with your survival tools with you when camping will make you more prepared for the situations you might face out there..
  • COMES WITH DURABLE CANVAS BAG AND NYLON CASE – Store all the product parts in the ventilated canvas bag. The hand chainsaw comes in a small nylon case, this to to protect the s....
Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

  • ...h of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back on your hardware or big box store visits..
  • The Sili Saw Blade Sleeves are designed for use with 10” diameter saw blades only. They can be used with thin kerf or standard kerf saw blades and will hold one saw blade per sleeve. Each sleeve has a convenient hang tab to place your protected saw blades on a hook to get them out of the way. This storage method allows you to store multiple saw blades on a single hook without worrying about bare blades rubbing and smacking into other blades causing unwanted damage..
  • The hang tabs pull double duty since they are just large enough to act as a carrying handle. This makes transporting or moving the blades from one location to the next a breeze. One more and very important feature is that the Sili Saw Blade Sleeve protects our fingers. Handling bare, unprotected blades is precarious at best. Keep your fingers and your saw blades protected when your blades are not in use with a Sili Saw Blade Sleev....
Check Stock

Lynx Garlick Taytools Thomas Flinn British 26” Crosscut Saw with Taper Ground Blade, Stained Beech Handle 10 TPI Filed for Cross Cutting

  • This saw is made by Thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK..
  • Saw plate is made from Sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening..
  • The saw plate is taper-ground and gets progressively thinner (approx. 0.005 inches) from the teeth to the back of the saw. This greatly reduced binding in the cuts..
  • Handle is stained European Beech with brass button screws.
  • 26” saw plate has 10 TPI and filed for cross cutting.
Check Stock

Lynx Garlick Taytools Thomas Flinn British 24” Rip Saw with Taper Ground Blade, Stained Beech Handle 4.5 TPI Filed for Rip Cutting

  • This saw is made by Thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK..
  • Saw plate is made from Sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening..
  • The saw plate is taper-ground and gets progressively thinner (approx. 0.005 inches) from the teeth to the back of the saw. This greatly reduced binding in the cuts..
  • Handle is stained European Beech with brass button screws.
  • 24” saw plate has 4.5 TPI and filed for rip cutting.
Check Stock

Lynx Garlick Thomas Flinn British 22” Rip Saw with Taper Ground Blade, Stained Beech Handle 4.5 TPI and Filed for Rip Cutting

  • This saw is made by Thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK..
  • Saw plate is made from Sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening..
  • The saw plate is taper-ground and gets progressively thinner (approx. 0.005 inches) from the teeth to the back of the saw. This greatly reduced binding in the cuts..
  • Handle is stained European Beech with brass button screws.
  • 22” saw plate has 4.5 TPI and filed for rip cutting.
Check Stock