Reviews Auto Water Pump Seal

Super Soaker 3000

  • SUPER VALUE WATER GUNS – 2 Pack 1200CC Super Water Blaster Soaker Squirt Gun, Perfect Summer Swimming Pool Beach Sand Outdoor Water Fighting Play Toy for kids adults or whole family fun outdoor activity toys..
  • SUPER HIGH CAPACITY- The water blasters holds up to 1200cc water that super players can unleash the massive blast in moment to overwhelm opponents with high pressure pump water shoot action. Go big and have fun to cool your summer!.
  • SUPER BUCKLE DESIGN - Unique design with button auto open is different with the first generation, it open instantly at the touch of a button and completely doable for kid. Once closed, the seal is tight and no leak.Tested for Safety and Durability. Meet US standard..
  • SUPER EASY TO PLAY - Quanquer 2 pack 1200cc water gun for boy girls with unique 3 inch opening design help to refill your blaster in just 1 SECOND and get back to the water blasting action quick while your opponent still refilling. Just dunk, fill and close. Pull the pump, and shoot easily! Once refilling, it could be fired for almost 50 times..
  • QUANQUER PROMISE - Our mission is to surprise our fans with intelligence, spread joy and unbeatable value to the world! We offer our water guns 30days refund and satisfaction guarantee for any manufacturing defect....
Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

  • The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
  • This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
  • The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
  • As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
  • The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..
Check Stock

Athena Parts Water Pump Gasket Kit with Bearings for KAWASAKI KX 250 F 2004-2008, SUZUKI RMZ 250 2004-2006, black

  • Includes every gasket, O-ring, bearing, and seal required to rebuild a water pump..
  • Typical kit includes the following -Bearings where applicable. -Rubber Seals. -Mechanical Water pump seal where applicable. -Side cover gasket. -Water pump gasket. -Snap rings located on water pump shaft. -Copper drain washers..
Check Stock

FLUENTPOWER 3/4 HP Utility Pump with Full Stainless Casing, Submersible Sump Water Pump with Float Switch,Max Lift 27 Ft and Max Flow 3300 GPH, 3/4" Garden Hose Adapter and 1"&1.5" MNPT Included

  • 【Float Switch Automatically Control】- The pump is automatically ON/OFF controlled by float switch according to water level. It starts at water level 30~50cm and stop at 10~15cm. It can remove water down to 1 cm by manually control..
  • 【Full Stainless Casing and Long Cable Cord】Solid metal casing is resistant to rust. This pump is only works with clean water that contains small solid less than 5mm. Pump also comes with a long 26.2ft cable cord, which allows pump to go deep enough (23ft) in the water..
  • 【Oil-Filled Seal Structure with Thermal Protection】- Oil-filled seal structure gives pump longer duration, which is much longer than regular mechanical seal. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal overload protector, pump will rework after cooling down..
  • 【3/4 HP Power High Efficiency】- Maximum capacity of transferring water up to 3300 GPH with 1.5″ discharge port and hose horizontally, Maximum delivery height is 28ft vertical, 2200 gallons per hour on at 10ft discharge lift..
  • 【GHT 3/4″, NPT1″ and 1.5″ male tread connectors included】- With 1.5″ discharge port will give pump maximum output flow rate. Multiple hose adapters help you to get pump starte....
Check Stock

Go, Flush, Wash and Dry

  • Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
  • Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
  • Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
  • One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..
Check Stock

Acquaer 1/2HP Submersible Utility Pump, 3030GPH Stainless Steel Sump Pump, Water Removal for Basement Hot Tub Pool Cover Draining, 30ft Cord

  • Effective and Powerful performance: Pumps water 1.9X faster than other pumps. With its open impellers, the flow rate can be up to 3600 GPH with a maximum lift up capacity of 30FT. This 1/2 HP submersible water pump can quickly remove standing water, preventing the flooding damage. The pump can handle various types of water including clear water, rainwater, spring water, river water, lake water and other types of water (with up to 1/4" Diameter Solids)..
  • Effortless water removal driven by the US patented Auto-Flo Technology: The water pump is turned on as soon as Auto-Flo detects a water level of 2" (about 50.8 mm). Auto-Flo shuts down the pump when the water level falls below the normal level, protecting the motor from burns caused by dry running..
  • Knock Over Operation & Dry Run Protection: It works continuously even if it is accidentally knocked over. When the surrounding water level falls below the sensors or a blockage occurs, the Auto-Flo will turn the pump off, preventing dry running causing machine failure..
  • 6 Adaptors (2*2”,1-1⁄2”,1-1⁄4”,1”, 3⁄4”): 6 adaptors depending on the urgency and speed required for draining water. Our largest 2'' adapters need 2'' water pipes to achieve a max 3600 GPH of pumping water, which requires a 2''....
Check Stock

Replacement Luraco Magnetic Jet Head BF-004 Fits Pedicure |spa Massage Chair| Tubs Spa Chairs Accessories.

  • ...etic head uses magnetic coupling technology, no shaft seal, will never leak, is worry free and Magnet-jet be easily clean..
  • 【Pedicure Spa Chair Magnetic Head】This Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor.Powerful and durable with 'No Splash' Design,Auto turn OFF to protect system when water level is low or magnet jet head is not attached..
  • 【Magnetic Head 】Size approx ：3 3/8"Diameter Back Head X 3 1/8"Diameter Front Head.Magnetic Head Set Include:1- base,1- magnetic impeller,1- cover..
  • NOTE: This Head will not fit to previous ECO jet system.When the magnetic induction pump is started, it will detect if there is enough water within 15 seconds. If there is not enough water detected within 15 seconds, it will automatically stop. If you want to start after stopping, you must cut off the power again, and then it can start..
  • 【After-Sales Guarantee】If you find that the product does not work, please check whether the pump is faulty. If you encounter any problems, please contact me..
Check Stock

FLUENTPOWER 3/4HP Utility Pump 3300GPH Stainless Steel Submersible Sump Pump, Drain Clean Water for Basement Flood Cellar Pool Pond Garden and Hot Tub

  • ☘【3/4 HP HIGH EFFICIENCY】Equipped with 3/4 HP powerful motor, the capacity of transferring water can be Max. 3300 GPH with 1.25" discharge hose horizontally. Pump has the ability to lift water up to Max. 28 ft vertical, 2200 gallons per hour on at 10 ft discharge lift. This utility pump works with CLEAN water which contains small solid less than 0.2"..
  • ☘【FULL STAINLESS STEEL CASING】Assembled by integrated 304 stainless steel housing and pump base with better cooling ability for long life. Pump also comes with a 26.2 ft long cable cord, which allows pump to go deep enough (23 ft) in the water. This pump can be used in Min 7"x7" pit..
  • ☘【SIMPLE PLUG-IN CONTROL】The pump ON/OFF is controlled by cable plug. It can start pumping water from 2" down to 0.4". Designed for quickly draining water in hot tub, water tank, rain barrel, swimming pool, garden ponds, wells and so on..
  • ☘【SAFETY ENSURE& DURABLE】Oil-Filled Seal Structure gives pump longer duration, which is much longer than regular mechanical seal. Full corrosion-resistant shell and thermal protection ensures the pump will not be burned out, even when the pump trigger thermal overload protector, pump will rework after cooling down..
  • ☘【EASY TO INSTALL】Comes with three plastic ada....
Check Stock

Utility Pump Replacement Carbon Brushes,Impeller,Shaft Seal Part for FPOWER Water Transfer pump (1 Set)

  • Utility Pump Replacement Carbon Brushes,Impeller,Shaft Seal Part for FPOWER Water Transfer pump (1 Set).
  • Package Content: 2 x Carbon Brushes, 1 x Impeller, 1 x Seal.
  • Carbon Brush Size (Approx) : 18 x 6 x 6 mm.
  • Impeller Measures: 1-3/8" Diameter, 1/2" Width with D Shaped Drive Hub for 5/16" Diameter Shaft.
  • Impeller&Seal are also fits in FPOWER DC 12-Volt Utility Water Transfer Pump.
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock