Reviews Auto U joint

TEKTON 1/4, 3/8 Inch Drive Universal Joint Socket Set, 33-Piece (1/4-3/4 in, 6-19 mm) | SHD99301

  • Includes 7-pc. 1/4 in. drive 6-point inch u-joint sockets: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 9-pc. 1/4 in. drive 6-point metric u-joint sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 7-pc. 3/8 in. drive 6-point inch u-joint sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-point metric u-joint sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • Combines a shallow 6-point socket and compact universal joint.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool.
Check Stock

NEW SOUTHWEST SPEED STEEL DRIVESHAFT WITH SLIP SPLINE YOKE AND U-JOINTS FOR RACING, STREET RODS, HOT RODS, AVAILABLE FROM 27" TO 69"

  • Precision balanced, lightweight steel shafts are in stock & ready to ship.
  • Your choice of any length from 27" to 69" long, in 1/2" increments.
  • These lengths are measured center of u-joint cup to center of u-joint cup (2nd picture above), but we also have a way to measure them without having a current shaft..
  • Includes new 27 spline yoke and 1310 series u-joints. Other yokes & conversion u-joints are available. Just ask before ordering for the price difference..
  • These driveshafts have been used for years by some of the best race car & street rod builders in the country.
Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
  • PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
  • HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
  • MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
  • MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check Stock

OEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool

  • RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
  • Remove ball joints quickly and easily with our ball....
  • VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
  • Our ball joint tool kit works on U joints, brake anchor pins, and more.
  • DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
  • Easy to use, our ball joints press kit is excellent for saving on the expense of....
  • PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
  • EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
  • Our ball joints kit system is the best way to....
Check Stock

Bodeman - Replacement Front Driveshaft/Propshaft for 1996-1997 Jeep Grand Cherokee 5.2L w/Auto-Trans - (29 15/16 Inch)

  • Length: 29 15/16" - Measurement is taken from center of U-joint to the opposite end.
  • APPLICATION NOTE: w/249 Transfer Case | 5.2L | Automatic Transmission.
  • Measure the Driveshaft Length and Check the Fitment to Confirm before Order.
  • SAME DAY SHIPPING! Located in Jamaica, NY, USA, Bodeman Is a Company Servicing Auto-shops and Dealerships with OE Quality Replacement Parts.
Check Stock

Strong Ball Joint,U-Joints and Brake Anchor Pins Press and Removal Tools丨Universal Installation Kit for Pre-pressed Upper or Lower Control Arms

  • This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent..
  • This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time..
  • Package:10pcs as pic shown in box, 7/8" (22mm)socket recommended, and the exquisite plastic is through heat treated which make the surface more beautiful, you are not only got a set of tool, you also got a nice gift..
  • Well Made: better finish, more smooth screw, flat machined to keep sitting flush against the ball or u-joint, air damping new design thread for little accurate adjustment!.
  • Brand Promise: 1 year warranty, free return replacement or refund if missing parts, thread problems or anything else.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

HORUSDY 3-Piece Impact Universal Joint Swivel Socket Adapter Set, 1/4', 3/8”, 1/2' Drive, 360° degree Chrome Moly steel U Joint Sockets.

  • Made of heat treated chrome molybdenum steel with a corrosion-resistant black phosphate finish. These universal joints meet and exceed ANSI/ASME standards..
  • This 3-Piece Impact Universal Joint set includes 1/4, 3/8 and 1/2-inch Drive U-Joints..
  • The universal joint adopts the innovative ball design to evenly distribute the torque load on the larger surface area and improve the operation range, Full 360° degree motion allows U joint swivel sockets to access complete rotation to reach tight spaces, access hard to reach fasteners..
  • Spring-loaded detent balls securely latch and through-hole in the drive end locks onto drive tang, It can effectively make up for the defects that the traditional universal joint may be stuck or broken..
  • High contrast size marking is a permanent laser marker, which can be identified accurately even in weak light..
Check Stock

TUCAREST 425-356 Upper Steering Shaft Column w/U-Joint Compatible with 2008-2012 Ford Escape / 2008-2011 Mazda Tribute Mercury Mariner Replace # 9L8Z-3B676-A 8L8Z3B676A

  • Intermediate Steering Shaft : Keeps the steering gearbox and steering wheel connected. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning..
  • Direct Replacement - Easy Installation:While this is not a genuine OEM part, it is a direct replacement and will fit, work and function like the original part. This replacement intermediate steering shaft is manufactured from high quality steel to ensure longevity providing excellent value..
  • Universal Joint :Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..
Check Stock

TUCAREST 425-168 (for 3.5/3.6L w/Hydraulic Power Steering,Not Electric) Intermediate Steering Shaft Column w/U-Joint Fit for 06-12 Chevy Malibu / 06-10 Pontiac G6 / 07-09 Saturn Aura # 25979679

  • Intermediate Steering Shaft : Keeps the steering gearbox and steering wheel connected. The universal joint or also called as u-joint at the end of the steering shaft connects to the steering gearbox which has another u-joint that connects to the steering wheel allows for the angles between them to be supported resulting to your vehicle wheels smooth and easy turning..
  • Direct Replacement - Easy Installation:While this is not a genuine OEM part, it is a direct replacement and will fit, work and function like the original part. This replacement intermediate steering shaft is manufactured from high quality steel to ensure longevity providing excellent value..
  • Universal Joint :Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Intermediate Steering Shaft..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..
Check Stock