Reviews Armature

HuthBrother Injector Tune Up SHIM Kit Fits 1994-2003 7.3L powerStroke Diesel Engines (NO TOOLS)

  • ★【Package includes】–TEN .004″ thick special stainless steel washers. (TWO TO BE INSTALLED UNDER THE ARMATURE PLATE TO INCREASE THE CLEARANCE to .004″.
  • ★【Package includes】–FORTY .002″ and FORTY .003″ stainless steel SOLENOID SPACER SHIMS. One of each placed under all four corners of the coil (for a total .005″) to increase the SOLENOID to armature clearance, when SOLENOID is energized..
  • ★【Package includes】–STEP BY STEP INSTRUCTIONS WITH PICTURES to install the two .004″ armature shims and INSTALL the .002″ and .003″ SOLENOID SPACER SHIMS (total .005″) and tips on thing to check with the valve cover off..
  • ★【 Fits Following 】–Kit Works on most HEUI injectors.
  • 1994 – 2003 7.3L PowerStroke, International T444E / DT466e / 1530E . Also works on Cat 3126B top solenoid , International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors..
  • ★【After-Sales Service 】–Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

Etymotic ER3SE Studio Edition Earphone

  • Frequency Response: 20 Hz – 16 kHz. Transducers: Single high-performance balanced armature per channel..
  • high performance Balanced Armature micro-drivers.
  • 4ft reinforced detachable cables with 3.5mm Gold plated stereo Plug and MMCX connectors.
  • Noise Isolation: 35dB using silicone ear tips, 42dB using foam ear tips.
Check Stock

Lacupella Human Figure Cake Armature for Crafting Clay Modeling Chocolate Fondant Figurines Cake Topper – Bendable and Reusable Sturdy Skeleton - Multi-Purpose Sculpting Structure 15 inch Tall

  • [PROPORTIONATELY CORRECT] This armature is designed and constructed to be proportionately correct based on human anatomy. Each kit comes with a human....
  • [EASY TO MANIPULATE & SCULPT] Hand-crafted from a non-staining, pliable aluminum wire, our fully adjustable 15 inches/38 cm figure armature is strong,....
  • [FLEXIBLE YET STURDY] Extended legs with food-safe flexible straw (6") for inserting the figurine into a cake so that it is sturdy n top of the cake....
  • [MULTIPURPOSE] Use this human figure armature as a base structure for fondant, modeling chocolate, crafting polymer clay and sculpey.
  • [ACHIEVE MORE IN LESS TIME] It can save you time as you don’t have to build a wire structure from scratch so you can focus on what you do best in....
Check Stock

Etymotic ER4XR Extended Response Earphone

  • High performance Balanced Armature drivers are precision matched to within 1 dB.
  • Transducers: Single high-performance balanced armature per channel..
  • Specially designed for uncompromising accuracy in the mid to high frequencies with a bit of extra presence in the lower end.
  • Sleek, anodized, laser etched aluminum body and braided, reinforced detachable 5 ft. Cables with custom MMCX connectors.
  • 35-42 dB of noise isolation with a max output of 122 dB.
Check Stock

Diy Studio Stop Motion Armature Kits | Metal Puppet Figure for Character Design Creation | Not-Ready Studio Armature Kits Very Easy to Assemble for Stop Motion Animation or Just Fun | 160 mm Tall

  • ✅ HIGH QUALITY MODEL ARMATURE KIT - include small parts, made from Steel with Balls and Socket Joints..
  • ✅ MULTI PURPOSE USING - Suitable for stop motion animation for beginner, model making, or just fun, make your own creation.
  • ✅ NATURAL AND ANATOMICALLY CORRECT SHOULDER AND TORSO JOINTS - perform "shrug" and front-to-back shoulder movements with precision and control.
  • ✅ VERY EASY TO ASSEMBLE – the armature kit has been designed to be easily assembled by both Students and Stop-Motion Animation Artists to create....
  • ✅ DOUBLE JOINTED BALLS AND SOCKET JOINTS - the armature features fixed joints, which have just one pivot point allowing for natural human movement..
Check Stock

Diy Studio Stop Motion Armature Kits | Metal Puppet Figure for Character Design Creation | Not-Ready Studio Armature Kits Very Easy to Assemble for Stop Motion Animation or Just Fun | 200 mm Tall

  • ✅ HIGH QUALITY MODEL ARMATURE KIT - include small parts, made from Steel with Balls and Socket Joints..
  • ✅ MULTI PURPOSE USING - Perfect for stop motion animation for beginner, model making, or just fun, make your own creation.
  • ✅ NATURAL AND ANATOMICALLY CORRECT SHOULDER AND TORSO JOINTS - perform "shrug" and front-to-back shoulder movements with precision and control.
  • ✅ VERY EASY TO ASSEMBLE – the armature kit has been designed to be easily assembled by both Students and Stop-Motion Animation Artists to create almost character designs.
  • ✅ DOUBLE JOINTED BALLS AND SOCKET JOINTS - the armature features fixed joints, which have just one pivot point allowing for natural human movement..
Check Stock

KZ AS10 IEM 5 Balanced Armature Driver Earphone, Stereo HiFi KZ in Ear Monitor Headphone Musician Headset with Detachable 2 Pin Cable(No Microphone, Black)

  • 5 Balanced Armature Driver KZ AS10 Earphone: With 5 balanced armature driver on this KZ in ear monitors, 5 balanced armatures response from Low to High frequency, add more definition and show more details in music, provide a balanced sound feature..
  • HIFI Sound: Impressive punch and impact of bass, fast and accurate with quick attack and decay.Full and warm Mids with excellent detail. Highs are well extended but not overly boosted. Sound stage is very wide and individual instruments are easy to locate..
  • 5 Armature Driver Details: KZ AS10 musician in ear monitor uses 5 driver, include one 22955 BA driver for Lows can be comparable to the traditional dynamic driver. 1 piece 296898 for Mids, 2 pieces 30095 for Highs, 1 pieces 31005 for Mid and High..
  • Detachable OCC 2 Pin Cable: Like most of other KZ headset, This KZ AS10 earbuds headphone is equipped with detachable cable, if original cable is broken or want to have a try for upgrade or other cable, this detachable design would be perfect for you..
Check Stock

Kinboofi KZ AS16 in Ear Monitor Earphone Pure 8 Balanced Armature Drivers Per Side, KZ Stage Monitor Earphone High Fidelity Earbuds Headphone (Black No Mic)……

  • Pure Balanced Armature Drivers KZ AS16: The Newest KZ AS16 pure balanced armature HIFI earphone equipped 8 armature drivers in each side, reference level high-end HIFI AS16 earphones bring you near-real auditory experience on the spot. Before it appearance, the similar configuration, the sound quality is close to the product, the price is basically far over this KZ AS16 headphones..
  • Electronic Frequency Division and 3 Channel Guide Sound Physical Construct: Not only with the electronic frequency division board to make sure the sound is clear, but also make a physical structure to give a more clear enjoyment. Easily distinguish the different instrumental tools and human voice..
  • Durable Metal Aluminum alloy Penal: KZ AS16 monitor headphone uses the Aluminum alloy and resin as the major structure material, provide this KZ IEM Headset more durability feature and fashionable appearance..
  • Upgrade Detachable 2Pin Cable Design of KZ AS16: Newest protective 2 pin design on this KZ earphone, effectively protect the insertion pin from breaking and prolong the using time. 0.75mm 6N OFC cable with gold plated standard 3.5mm jack design,....
Check Stock

Makita GA9060 Angle Grinder, with No Lock-On Switch, 9'

  • Rear handle trigger switch with no lock-on feature.
  • lock-off feature requires two actions to start the grinder.
  • Redesigned motor with greater armature stability and larger commutator bars for 3 times longer life compared to previous model.
  • Zig-zag epoxy on both sides of the armature coil and a powder-coated field for added protection from Filth and debris for longer motor life.
  • Labyrinth construction seals and protects the motor and bearings from Filth and debris for longer tool life.
  • Spiral bevel gears for smoother rotations and a more efficient transfer of energy.
Check Stock

Makita GA7061 7\ SJS II Angle Grinder with No Lock-On Switch

  • Powerful 15.0 amp motor delivers 8, 500 RPM for optimum durability and performance.
  • Redesigned motor with greater ARMATURE stability and larger commutator bars for 3 times longer life compared to previous GA7061.
  • SJSII provides a leaf spring and CAM gear drive mechanism that is engineered to reduce vibration for increased operator comfort during extended use.
  • Rear handle trigger switch with no lock-on feature.
  • lock-off feature requires two actions to start the grinder.
  • Zig-zag epoxy on both sides of the ARMATURE coil and a powder-coated field.
Check Stock