Reviews Anti asphyxia Valve

Jtuxcke Air Mattress Valve, Air Valve 3 in 1 Inflatable Air Valve Secure Seal Cap Air Valve Caps Plugs Replacement for Inflatable Airbed Mattress, Sturdy for INTEX Inflatable Airbed Mattress

  • One Way: The 3 in 1 air valve is a one-way inflation valve, good for quick inflation..
  • The air mattress valve design ensures anti-leak inflation.Easy to fit, good performance and long serve life..
  • Designed for certain branded inflatable airbeds, such as for inflatable valve intex air mattress plug. Applicable models: 66723,66724,66725,68926,66767,66768,66769,66770,69710,66721,66720,67736,66972,66974,69710,67716.
  • Anti-leak: Air mattress valve features high secure air protection, the valve cap design ensures anti-leak when air inflation..
  • Easy To Install And Replace: 3 in 1 air valve secure seal cap It will fit into a hole about 4.28 cm in diameter and has a plug cover.
  • Very easy to install and replace,you will find it convenient..
Check Stock

6pcs Electrical Pressure Cooker Float Valve Gaskets and 2pcs Original Anti-Block Shield for Instant Pot

  • The float valve rubber gaskets fit Duo 3, 5, 6, 8 Quart, Duo Plus 3, 6, 8 Quart, Ultra 3, 6, 8 Quart, Smart 6 Quart, Lux 3, 8 Quart, Not Fit Lux 5, 6 Qt..
  • The Original Anti-Block Shield fit all series Instant Pots..
  • The float valve is made of flexible silicone, tasteless and non-toxic, safe for use .Easy to install and relocate for cleaning, insert the smaller side of floater firstly through the top of the handle, then place the seal on the smaller side to make the floater rest in the grove of the valve..
  • The round anti-block shield can be used to replace the oval anti-block shield. Prevents food particles from interfering with the steam release valve..
  • Float valve sealer and anti-block shield are part of the lid of a pressure cooker, they are often washed off and losed, these spare part can make your disabled cooker work like new..
Check Stock

MAM Easy Start Anti Colic Bottle Valve Replacement, 2 Pack

  • REDUCES COLIC, GAS AND REFLUX - Advanced MAM Easy Start anti colic venting system creates a vacuum effect to eliminate bubbles that cause gas and aggravate colic and reflux symptoms..
  • VALVE REPLACeMENT COMPATIBLE WITH MAM BOTTLES - MAM anti colic valves fit all MAM easy start anti colic baby bottles..
  • PREMIUM EUROPEAN MATERIALS - Made in Europe from high quality, 100% baby safe BPA & BPS Free materials. Meets or exceeds both U.S. & European safety standards..
  • EASY TO CLEAN - Wide openings on top and bottom of MAM Baby Bottle allows for easy, total cleaning of the anti colic valve..
  • PRODUCT DETAILS - 2 MAM Easy Start Anti Colic Baby Bottle Valve Replacements.
Check Stock

BUZIFU 2Pcs Air Valve 16mm Boston Inflatable Valve Replacement Universal Spiral Boat Air Valve, One-way Inflation Replacement Boston Screw Valve for Inflatable Rubber Dinghy Kayak Boat Airbeds

  • ★【Quickly Inflation & Deflation】: Boston screw valve can be installed in the piston hole of about 16.5mm / 0.64 inches. The dinghy valve is a one-way inflation valve, good for quick inflation and deflation, saving you time. Please carefully confirm the size of the air nozzle required for your kayak before purchasing, the diameter of the air nozzle is 16.5mm.
  • ★【Durable & Anti-Seawater Corrosion】: Air valve inflatable boat spiral is made of high-quality rubber material. Airbed replacement valve is durable and has the characteristics of anti-seawater corrosion, anti-leakage and long service life..
  • ★【Leakproof Design】: The inflatable air valve replacement screw is designed to be closed. There is a rubber pad at the bottom of the air plug. After inflation, the rubber pad at the bottom of the 16.5mm screw air valve will automatically fit the edge of the air plug, which can prevent leakage more effectively and provide you with Safer protection..
  • ★【Easy to Install & Disassemble】: Boston air valve adopts spiral design, easy to install and disassemble, you just need to rotate to the right to remove the old Boston Valve, then rotate the new Boston Valve to the left..
  • ★【Suitable for Most Inflatable Boat】: The airbed valve cap replacemen....
Check Stock

HiPlay JIAOU 1/6 Scale 12 inch Female Super Flexible Seamless Figure Body, Slender Type Minature Collectible Action Figures(Natural Skin)

  • Nursing training mode:Simulate Patient Care - Training patient manikin is Life Size, realistic flexibility of limbs and joints, various positions can be realized, can simulate bathing and changing clothes for patients in bed.
  • Features: easy to operate, easy to operate, easy to disassemble, practical and durable. Professional Training Design - With the help of our Patient Nursing Manikin, you can practice various nursing skills,.
  • A wide range of applications: Essentials for medical schools, hospitals, medical institutions, etc. Use this model to help skilled tracheal intubation to improve the rate of asphyxia recovery..
  • Kinematics: Wounds are diverse and can be used as a nursing exam and training. Simulating real wounds allows beginners to experience wound management..
  • Multifunction Demonstration Manikin Anatomical Human Model for Nursing Medical Training Teaching & Education Medical Supplies.
Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
  • 【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
  • 【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
Check Stock

Stud Mount Valve Spring Compressor Fits For All 3/8 and 7/16 Rocker Studs Alternative to Part # 66784 62370

  • APPLICATION: Universal valve spring remove tool fits for all 3/8'' and 7/16'' rocker studs, specially designed for compressing valve springs with the....
  • FUNCTION: Simplifies between-rounds valve spring changing. Easily and quickly replace valve springs, remove valve spring from an assembled engine for....
  • Easy to use: The tool disassembles easily. Use the principle of leverage, press down to compress coil spring, then remove valve keepers, and release....
  • MATERIAL: Made of heavy-duty steel, treated with anti-rust and anti-corrosion, solid and durable. A strong, durable handle withstands the most extreme....
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

Bling Valve Stem Caps, Accmor 4 Pack Sparkling Crystal Tire Valve Caps, Universal Car Stem Air Caps Cover, Attractive Dustproof Tire Valve Stems Car Accessories for Cars, Trucks, Motorcycles (Black)

  • 【ABS Plastic & Anti-Rust】The material of the valve caps is ABS plastic, coated with polymer clay, Anti-Rust can effectively prevent the valve from being covered with dust/snow/rainwater, extend the life of the tire..
  • 【Handmade Sparkling Rhinestones】Our tire valve stem caps are made of Sparkling Rhinestones material, give your car a unique LUXURY look..
  • 【Rotating Thread & Anti-Leakage】The inside of the cap is rotating thread structure, it can fasten tightly with tire valve stem, effectively preventing the valve from leaking..
  • 【Universal Fits & Easy to Install】The size of the cap is 0.59” * 0.51”/ 15*13mm(H*W). It is universal fits for standard American (Schrader) valves. You can install it no need any extra tools, very easy and convenient..
  • 【Perfect Gift】You will receive package contains 4 pack white crystal valve caps, It’s a perfect gift for your families and friends..
Check Stock

KEYWELL Bike Schrader Tire Valve Stem Caps，4 Pack Handmade Crystal Rhinestone Universal Bicycle Schrader Billing Covers, Attractive and dustproof for Cycling Accessories (Black)

  • 【Unique Appearance-Handmade Sparkling Rhinestones】- These tire valve stem caps are made of Sparkling Rhinestones material, give your bike a unique LUXURY pretty look. It’s also a perfect gift for your families and friends..
  • 【High Quality Materials-ABS Plastic & Anti-Rust】 - The material of the valve caps is ABS plastic, coated with polymer clay, Anti-Rust can effectively prevent the valve from being covered with dust/snow/rainwater, extend the life of the tire..
  • 【Rotating Thread & Anti-Leakage 】- The inside of the caps are rotating thread structure, they can fastened tightly with tire valve stem, effectively preventing the valve from leaking..
  • 【UNIVERSAL SIZE TIRE VALVE CAPS - WIDE USAGE】It is universal fits for standard American (Schrader) valves. May Be Used On Wide Range Of The tire value. The caps size is 0.59” * 0.51”/ 15*13mm(H*W), You can install it no need any extra tools, very easy and convenient..
  • 【Excellent Service Offered-Risk Free】Kewell is your trusted brand, we offer 2 years warranty with “ No Question Asked” Money back or replacement. Just contact us if you have any question or issue with these tire value caps..
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock