Reviews Angle Steel Processing Machine

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...o a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

TECHTONGDA 600W Mill and Drill Brushless Motor Benchtop Drilling Milling Machine Variable Speed Mill 110V

  • ⚙Powerful function: This is a multi - functional drilling and milling machine, can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model..
  • ⚙Brushless motor: It USES a 600W brushless motor with strong power and easy maintenance..
  • ⚙All metal: It USES an integrated spindle and brass gear, which makes it not only precise but also durable..
  • ⚙Variable-Speed: Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs..
  • ⚙Professional drill and mill: One machine for multiple purposes, iron plate, stainless steel plate, angle iron, wooden block, plank, etc. can be drilled and milled..
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • ...Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
  • 【10】Shipping, under normal circumstances, arrives in Asia and countries in 7-15 days, and arrives in America in 15-20 days. 20-32 days in European countries. Bad weather such as hail and typhoon may be delayed. If you need faster time, please contact me. You can use DHL, UPS, etc. You only need to add extra freight, about 5-....
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...RO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

uxcell Chucking Reamer 5/16\

  • GREAT QUALITY: These reamers are made of high speed steel, high hardness for rust protection, durability and long service life,with oxidation surface has good strength of extension and corrosion resistance in many environments..
  • MAIN FUNCTION: Applicable for reaming to mold processing and handicraft processing..
  • WIDE APPLICATION: Widely used for bore machining, installed in drilling machine, milling machine, etc..
  • MATERIAL: Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • SHANK DIAMETER: 3/4/5/6/7/8/9/10/11/12mm..
Check Stock