Reviews Alden Drill Out Power Extractor

Stripped Screw Remover Set - 6 Pieces - Black Nitride

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check Stock

Tap Extractor - Steel Broken Head Taps Remover Stripped Screw Tap Extractor Set(10件套)

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

Soda Pilot ~ Women Lug Sole Low Heel Chelsea Fashion Ankle Bootie w/Double Elastic Gore (White, numeric_7)

  • 【NUT AND SCREW EXTRACTOR SIZE】:These 6-Pieces Bolt&Nut extractors work on SAE/Metric sizes - 5/16"(8mm), 10mm, 9/16"(14mm), 11/16", 3/4"(19mm), with 3/8 "to 1/4"hex adapter. And 6-Pieces Screw Extractor: 1#, 2#, 3#, 4#, 5#, 6#..
  • 【MULTI-SPLINE EXTRACTORS AND DRILL BIT KIT SIZE】:10-Pieces Multi-Spline Extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". 10-Pieces Left Hand HSS Drill Bit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". All these tools are clearly marked..
  • 【LEFT-HAND DRILL BIT SET】:The left-hand drill bits of this extractor set are made of high-speed steel, strong than right-hand drill bits, and not easy to wear. The 135° angle design of the head makes it easier to touch the fasteners and ensures the precise countersinking and hole smooth clean..
  • 【SUPERIOR GRIPPING POWER】:Each lug nut remover is precision designed. The reverse spiral groove of the socket is designed to bite and provide maximum grip. The more you turn, th....
Check Stock

REBRA Screw&Bolt Extractor Set and Left-Hand Drill Bit Set, with Hex Adapter, Easy Out Stripped Screw Remover Socket Set Tool for Stripped, Damaged, Rounded-Off, Rusted Bolts, Nuts&Screws 26-Pieces

  • 【NUT EXTRACTOR SIZE】:These 14-Pieces Bolt&Nut extractors work on SAE/Metric sizes - 1/4", 5/16"(8mm), 3/8", 10mm, 7/16"(11mm), 12mm, 1/2",13mm, 9/16"(14mm), 5/8"(16mm), 17mm, 11/16", 3/4"(19mm), with 3/8 "to 1/4"hex adapter..
  • 【SCREW EXTRACTOR AND DRILL BIT KIT SIZE】:6-Pieces Screw Extractor: 1#, 2#, 3#, 4#, 5#, 6#.
  • 6-Pieces Left Hand HSS Drill Bit: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8".All these tools are clearly marked..
  • 【LEFT-HAND DRILL BIT SET】:The left-hand drill bits of this extractor set are made of high-speed steel, strong than right-hand drill bits, and not easy to wear. The 135° angle design of the head makes it easier to touch the fasteners and ensures the precise countersinking and hole smooth clean..
  • 【SUPERIOR GRIPPING POWER】:Each lug nut remover is precision designed. The reverse spiral groove of the socket is designed to bite and provide maximum grip. The more you turn, the tighter the socket grips, so it can easily take out stripped, rusted, rounded-off or frozen lug nuts..
Check Stock

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • ...ion 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each compartment while drill bits and drilling guides include permanently l....
Check Stock

SharCreatives 55-Piece Master Screw Extractor Drill Bit & Guide set, Broken bolt extractor set, Multi-spline Extractors & Drill Bits for Removing Stripped, Frozen, Rusted, Roundoff Bolts, Screws, Pins

  • Made of heat-treated high-quality hardness 40 CR-MO (chrome-molybdenum) steel & HSS (high-speed steel) for superior durability with Titanium Nitride coating provides higher wear resistance, ability to withstand higher temperature. This bolt extractor set makes it the ideal set for removing broken screws, bolts, studs, fittings, threaded pipes pins and more..
  • The Master set contains 16 high-speed steel drill bits, 13 multi spline extractors, 10 drill bit guide bits, 6 spiral screw extractors , 5 extractor pins, 5 nut extractors. Multiple specifications and sizes to meet your various work needs..
  • Wide range of applications: All the screw extractors are precision engineered to easily remove seized, broken studs, bolts, pipes, lugs, socket screws and fittings.
  • The aggressive left handed drill bits and extractors create extra gripping power. Easy-out style spiral flutes embed themselves to increase grip as resistance increases. Drill bit kit guide and long extractor pins for hard-to-reach and tight areas. Fit where others won't and can't..
  • 55 Pieces includes: 16 high-speed stee....
Check Stock

Powerbuilt 12 Volt Lug Nut Impact Wrench 2 Sockets, Cigarette Lighter Plug with Carry Case, LED Light for Night - 240067

  • ⚙️⚙️⚙️Drill bit is made of cobalt, nut and screw extractor kit is made of high-hardness chromium-molybdenum steel material, and the reverse spiral groove is designed to buckle downward to provide maximum grip..
  • The extractor kit is a 3-in-1 screw & nut removal kit and drill bit kit. Whether it‘s for car maintenance or daily use, it can provide you with great convenience..
  • Nut extractor Size: 1/4 inch, 5/16 inch (8 mm), 3/8 inch, 10 mm, 7/16 inch (11 mm), 12 mm, 1/2 inch, 13 mm, 9/16 inch (14 mm), 5/8 inch (16 mm), 17 mm, 11/16 inch, 3/4 inch (19 mm), included 3/8" to 1/4 "hex Impact adapter..
  • ️️️Screw extractor and drill bit kit Easy out rusty or damaged screws. Screw extractor kit:1-6#, Drill bit kit: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8", each precision tool has a clear mark..
  • XEWEA promises that customers can enjoy our friendly customer service (just send us an email via Amazon), and a free warranty within 90 days. If you have any questions, please contact us..
Check Stock

Gifts for Men - Damaged Screw Extractor Kit Stripped Screw Extractor Set DIY Hand Tools Gadgets Gifts for Men Broken Bolt Extractor Screw Remover Sets

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

XDOVET Screw Extractor Set, Screw and Bolt Extractor Set, Easy Out | Heavy-Duty | Rocket Socket-25PCS

  • 【25 pcs bolt extractor set&multi-application】 Extractors from 1/8 inch (3.5mm) to 7/8 inch (23mm) by 1/32” increment and comes with a heavy-duty storage case.Extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications..
  • 【Precisely machined aggressive multispline teeth】The internal thread with reverse spiral flutes design to bite down to provide maximum gripping power, the more you turn, the tighter the socket grips.Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping..
  • 【High-visibility size】 Extractor size and recommended drill bit size are etched on each tool for quick selection of the right drill bit.Heavy-duty blow-molded case lets all the bolt remover stay organized and take your set on the go.Compatible with common to heavy-duty power tools, drivers and screwdrivers handle tools. The knockout pin for easier removal..
  • 【Premium industrial grade material】Made of heat-treated high-quality high-carbon steel (chromi....
Check Stock