Reviews Al Wire Feeding System

SIEMENS Q1520 15/20A Duplex Circuit Breaker, 15/20 amp, Black

  • Twin single pole, 15/20 Amp 120-Volt type QT interchangeable circuit breaker.
  • Siemens type QT circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature.
  • Compatible with Siemens PL and ES series load centers.
  • Use for overload and short-circuit protection of your electrical system.
  • Accepts #14-6 AWG Cu or #14-6 AWG Al wire.
Check Stock

INTBUYING Cable Wire Stripping Machine, Electric Automatic Wire Stripper Machine, Waste Aluminum Scrap Copper Cable Strip Peeler, 11Channels 10 Blades for Dia 0.06-1.5in Scrap Cable Recycling

  • 110V 370W automatic electric wire stripper machine SMS-38, whole size is 24.8x11.81x15.16 inch. It is easy to operate and convenient to carry, it can process single core copper wire, twin cores copper wire..
  • Wire stripping range is Dia 1.5- 38mm (0.06-1.5inch) and make sure the cables diameter are similar with the feeding holes, large wires in large feeding holes, small wires in small feeding holes, flat wires in flat feeding holes..
  • Equipped with 11Channels 10 blades for easy access to any cable or wire from the smallest to the largest. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time..
  • If the cables wires are blocked in the axises, please check: If the springs on the press wheels are too tight, loose them.
  • There are too much oil on the cables/wires, please wipe it..
  • Automatic wire strippers lead to fast stripping speed, fixed machine position, safe and reliable use.Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades..
Check Stock

MURRAY ECLX072M Ground Bar Kit with 15 Terminal Positions

  • Small openings accept a wire range of No.14-6 CU/AL.
  • Large openings accept a wire range of No.14-1/0 CU/AL.
Check Stock

Siemens ECLX210M 23 Terminal Insulated Neutral Bar

  • Small openings accept a wire range of No.14-6 CU/AL.
  • Large openings accept a wire range of No.14-1/0 CU/AL.
Check Stock

MURRAY ECLX071M Siemens Eclx Ground Bar Kit, 11 Terminal, No 14-6 Small, 14-1/0 Large Opening

  • Small openings accept a wire range of No.14-6 CU/AL.
  • Large openings accept a wire range of No.14-1/0 CU/AL.
Check Stock

Amico MTS-165, 165 Amp MIG/Flux Cored Wire, TIG Torch, Stick Arc DC Inverter Welder 3-IN-1 Combo Welding, 110/230V Dual Voltage.

  • MTS-165 capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function..
  • Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles..
  • Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending..
  • Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine..
  • Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control..
Check Stock

AmicoPower MTS-165, 165-Amp MIG MAG Lift-TIG Stick Arc Combo DC Inverter Welder, Compatible Spool Gun SPG15180

  • ...um). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/4 inch. The MTS-165 is the most efficient machine for every task..
  • The MTS-165 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-165 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-165 is designed and manufactured according to the highest production standards. You can use 2 pound and 10 pound spools. The ergonomic design and lightweight model make the machine very easy to carry. It has a variety of safety protection functions: automa....
Check Stock

MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder Weld Aluminum MIG 110/230V Dual Voltage Welding New

  • ...um). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 1/2 inch. The MTS-205 is the most efficient machine for every task..
  • The MTS-205 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-205 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-205 is designed and manufactured according to the highest production standards. You can use 2 pound and 10 pound spools. The ergonomic design and lightweight model make the machine very easy to carry. It has a variety of safety protection functions: automa....
Check Stock

QIDI Technology X-one2 Single Extruder 3D Printer Metal Frame Structure,Platform Heating

  • ▶Excellent Choice - The Aquila is an open source 3D printer developed by the FDM Technology which offers a print volume of 220 x 220 x 250 mm, it is....
  • ▶Audo Feeding - Insert the filament into the guide wire tube, activate the auto feeding function then it will be automatically sent to the nozzle,....
  • ▶Carborundum Glass Heated Bed Platform - With strong adhesion and uniform heating, it can be heated to 70℃ within 2-3 minutes and keep uniformly....
  • ▶Intelligent Backup System - Aquila 3D printer has the ability to recover from a power failure. It will automatically create a save point when....
  • ▶Easy to Assemble - The printer comes with several pre-assembled parts. You can assemble the printer quickly by following the instructions or video.....
Check Stock

AMICO MTS-185, 3-in-1 Combo 185-Amp MIG Lift-TIG Stick Arc DC Inverter Welder, Compatible Spool Gun Welding Aluminum: SPG15180.

  • ...um). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
  • all up to around 3/8 inch. The MTS-185 is the most efficient machine for every task..
  • The MTS-185 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest production standards. You can use 2 pound and 10 pound spools. The ergonomic design and lightweight model make the machine very easy to carry. It has a variety of safety protection functions: automa....
Check Stock