Reviews Aeration Cooling Equipment

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

ProMaker Home Brewing Stainless Steel Diffusion Stone Inline oxygenation Aeration Aerator Kit Oxygenation Diffuser for Wort Chiller Kettle Pump Beer Brewing Stone Kit

  • 【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
  • 【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
  • 【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
  • 【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
  • 【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.
Check Stock

Mobil 1 Transmission Fluid - Dexron-VI - ATF - Synthetic - 1 qt - Set of 6

  • Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous DEXRON fluids.
  • Improved performance over previous DEXRON fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance..
  • Designed for anti-wear protection and shear stability.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
Check Stock

ACDelco GM Original Equipment 10-9244 Dexron VI Full Synthetic Automatic Transmission Fluid - 1 gal

  • Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehicles/transmissions originally using previous DEXRON fluids.
  • Improved performance over previous DEXRON fluids in: friction durability, viscosity stability, aeration and foam control, and oxidation resistance..
  • Designed for anti-wear protection and shear stability.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
Check Stock

Dual-core Thermoelectric Peltier Cooling System Semiconductor Refrigeration Cooler Kit with Power for Plate Cooling Pet Bed Cooling etc

  • 【Bingo Choice】: Our dual-core thermoelectric peltier cooling system is suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
  • 【Wonderful Characters】: This semiconductor refrigeration cooler kit with power has stable working status and low noise, it doesn’t need refrigerant.
  • 【Wide Range of Applications】: This thermoelectric cooler can used for plate cooling, pet bed cooling, test bench, small space cooling.
  • 【Note】: Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc.
  • 【Extra Usage】: This dual-core cooling system kit can be used as dual-core cooling, air cooling device, cooling equipment.
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

5.76CFM Solar Pond aerator With 4pcs 100W solar panels, 300W Pond & Lake Aerator with 24V 5ah Power Box,100' Weighted Tubing, With Faster Sinking Diffusers

  • ☀️ [Upgraded 400W Lithium Battery Solar Aeration Pump Kit]: Solar Pond Aeration Pump Kit includes 100W*4 solar panels and 5.76CFM (300W) pond aeration pump and 5 Ah waterproof power box with switch. The newly upgraded and most comprehensive aeration pump system simplifies tedious steps for users..
  • 【Specially built for anti-floating diffuser】Using anti-rust and anti-corrosion base, changing the traditional whole piece of pure iron base, the base opens faster when the base opens downward, and the diffuser is not easy to float. Diffuser aeration holes are denser, producing air bubbles more evenly and faster. Use explosion-proof diffuser panels to eliminate diffuser cracking problems..
  • 【Integrated 24V 5Ah Power Box】: The creative controller and battery are perfectly matched, just press the switch to control the water pump to start and stop. There is no need for complicated settings, the power box controller will automatically adjust the solar panel and battery voltage to make the water pump work more stably. Do not expose to the sun and rain and keep ventilated for use. (20-30 minutes stop working for normal charging).
Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

  • Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
  • compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

AEDIKO 4pcs 5015 Cooling Blower Fan 3D Printer Fan DC 24V Dual Ball Bearing 50x50x15mm 0.17A Turbo Cool Fan

  • High Quality:5015 Fan is Made of Special and Premium Materials for the Fugetek FG-637, 647 and FG-857 Projectors,Which is High Temperature Resistant and Extremely Durable.
  • Easy to Install: Cooling Fan come with 2 Pin 30cm Wire Cable and the Cable with 2 Pin XH2.54 Power Connector ,Plug and Play ,Very Easy to Install.
  • Application: 5015 Blower Fan Widely Used in Humidifier, Aromatherapy and Other Small Appliances Series.
  • Small Heat Radiating Communication Equipment.
  • Intelligent Industrial Control Equipment Plate Cooling Heat, High Precision Medical Equipment Cooling.
  • Package Contents: 4pcs DC Blower Fan, If You Have Any Question for the Product, Please Feel Free to Contact US, We Will Do Our Best for You.
Check Stock

San Francisco Bay Brand Shrimpery Brine Shrimp Kit for Hatching Baby Brine Shrimp

  • Easy to set up, use, and clean – no aeration or additional equipment required.
  • Baby brine shrimp are an excellent food for baby fish (fry), small fish, reef aquariums, and others.
Check Stock