Reviews China Cooling Planting Equipment

Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor

  • ...perature and humidity sensor have 1 year warranty.).
  • 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • 5.√Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
Check Stock

Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier

  • ... original setting values in case accidentally power-off..
  • Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
Check Stock

VEVOR LED Grow Light, 400W Full Spectrum Dimmable, High Yield Samsung 281B Diodes Growing Lamp for Indoor Plants Seedling Veg and Bloom Greenhouse Growing, Daisy Chain Driver for 4x4/5x5 ft Grow Tent

  • High-Performance PPFD: Quality is our priority! It comes equipped with premium Samsung 281B diodes. More LED quantities and a new diode layout allow plants to receive more robust and uniform light. Consuming only 400W, ideal for high-benefit planting..
  • Adapt to All Growth Stages: Full spectrum technology provides four various light color choices: 3000K, 6500K, 660nm, and IR 760nm. It enables plants to grow with good quality at the seedling, growth, and flowering stage. Nourish your plants at any stage..
  • Hassle-free to Install & Adjust: Our growing light is designed with a stay bar, and the height can be adjusted at will, making it stable and flexible to install. With five brightness gears, you can adjust the light intensity freely. The multi-light connection with unified dimming is especially beneficial for large indoor growing and commercial planting, allowing you to take control of any space..
  • Suitable for All Kinds of Plants: The VEVOR plant lamp is widely used for planting all kinds of vegetables, seed cultivation, flowers, and other plants. ....
Check Stock

Antrader 4020 40x40x20mm 12V DC Brushless Radial Cooling Turbo Blower Fan for DIY 3D Printer Extruder Humidifier 3-Pack

  • 40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A.
  • Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Dual-core Thermoelectric Peltier Cooling System Semiconductor Refrigeration Cooler Kit with Power for Plate Cooling Pet Bed Cooling etc

  • 【Bingo Choice】: Our dual-core thermoelectric peltier cooling system is suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
  • 【Wonderful Characters】: This semiconductor refrigeration cooler kit with power has stable working status and low noise, it doesn’t need refrigerant.
  • 【Wide Range of Applications】: This thermoelectric cooler can used for plate cooling, pet bed cooling, test bench, small space cooling.
  • 【Note】: Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc.
  • 【Extra Usage】: This dual-core cooling system kit can be used as dual-core cooling, air cooling device, cooling equipment.
Check Stock

BJTDLLX 7 Pots DWC Hydroponics Grow System, 5-Gallon DWC System Recirculating Deep Water Culture, Hydroponics Growing System Recirculating Growing Kit with Air Pump +Submersible Pump Motor

  • 【7 Pot Hydroponic System】Our DWC hydroponic system comes with 6 Grow round buckets and a water change bucket. Soilless cultivation equipment is made of high-quality PP material, which is durable. The basket holds up to 5 gallons and is large enough to help you grow multiple plants at once..
  • 【Soilless Cultivation Equipment】Soilless cultivation equipment adopts a unique top drip irrigation design, does not use natural soil as a substrate, and uses nutrient solution for irrigation after planting. Simplified and efficient nutrient absorption process, making nutrient water fresher and easier to absorb..
  • 【Accelerate Plant Growth】DWC hydroponic growing system can accelerate plant growth. Soilless cultivation equipment can artificially create a good root system environment, avoid adverse factors of soil operations, and fully meet the needs of crops for water, nutrients, minerals and other growth environments..
  • 【Widely Used】The basic materials used for planting in the DWC hydroponic growing system can be recycled. Therefore, soilless culture has the advantages of water saving, labor saving, high yield, etc., which ca....
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

Gardena 08965-30 Basico herramientas para Plantar y trasplantar, cortar Flores y hierbas Contiene 8950, 8935, 8754, 206 Equipamiento, 17,0 x 11,2 x 41,0 cm, Estándar

  • Ideal basic equipment: The four-part Gardena garden set helps in planting and transplanting, weeding and clipping and makes a ideal gift set.
  • High quality: The robust Gardena combi system hand tools are corrosion-protected and especially resistant and elastic, breathable gardening gloves round off this multifaceted set.
  • Especially convenient: The hand tools are equipped with ergonomically shaped handles and angled handle ends that ensure comfortable work.
  • Clean, dry hands: The Gardena gardening gloves’ latex-coated interior and hand crests provide protection during planting and garden care work.
  • Scope of delivery includes: One Gardena basic equipment hand tools including one classic hand trowel, one weeding trowel, one classic garden shears, one pair of gardening gloves (size 8/M).
Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

  • Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
  • compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock