Reviews 4 Stroke Oil Engine

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

Vintage Rat Rod Pickup Truck Hot Rod T-Shirt

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

TFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW

  • 【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
  • Packing size:133x71x38.5cm/52.3''x27.9''x15''.
  • 【Main Parameters】Control System: #93 gasoline.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • 【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
  • Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
  • After use, the fuel in the carburetor must be completely discharged..
  • 【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
Check Stock

DLE Engines 30-C28#3 DLE30 Electronic Ignition

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of....
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct....
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread....
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage....
Check Stock

GM 6.2 & 6.5 Liter Diesel Engines: How to Rebuild & Modify

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

  • Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

Echo 6550050 Red Armor 2 Cycle Oil 50 Gallon Mix 50:1 - 1 Gallon

  • The right fuel mix oil can make the difference between a top performing, reliable engine and a high-maintenance, low powered engine. ECHO Red Armor engine oil incorporates powerful detergents that quickly remove existing carbon deposits, without sacrificing lubrication or film strength, and protects against future buildups..
  • Also, ECHO Red Armor oil stabilizes fuel to be useable for up to two years when added to fresh fuel. This powerful new oil is recommended for use in all air-cooled 2-stroke and 2/4-stroke (hybrid) engines..
  • The oil is JASO FD and ISO L-EGD rated. Enjoy easy starting and years of reliable performance from all your outdoor power equipment by choosing ECHO Red Armor oil..
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock