Reviews 3d Printer Electronics

FlashForge Finder 3D Printer with Cloud, Wi-Fi, USB for Education and Family Use (Yellow)

  • Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At the same time, it can minimize damages or offsets to the build plate..
  • The patented nozzle structure has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model and lower risks of extruder jams..
  • Finder features an intuitive calibration detection system to assist leveling. you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise..
  • Out of box,lower energy.A fun STEM educational experience in mechanical engineering and electronics..
  • Flashforge 3d printer Finder,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Columbia Kids Omni-Heat 3-D Knit Crew (Little Kids/Big Kids) Black/City Grey XL (18-20 Big Kids)

  • 【Leveling Free】– Build plate is well leveled in the factory.Removable and Heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG filament etc..
  • 【New Quick Detachable Nozzle】– loading more smoothly with new nozzle and more compatible with third-party filaments. Remove the nozzle from extruder just in one push.
  • Nozzle fast heated to 240°C in 50 seconds.If you need to print high-temperature filaments, you could purchase additional a 0.3, 0.4, 0.6mm 265℃ nozzle..
  • 【Filament detection function】– Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after user replaces the new filament..
  • 【Out of the box】– Best 3d printers for beginners,super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in mechanical engineering and electronics..
  • 【What you get】– Flashforge 3d printer Adventurer 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Ansee 3D Printer for Kids & Beginner, Mini 3D Printers Full Enclosed DIY Printer with Resume Printing and Removable Build Plate Free 1.75mm PLA Filament & TF Card for Home and School Use

  • ...All-in-one structure design, this 3d printer is fully assembled, designed easy-operated button, visible Protective door, screen for easy setting and visible progress, very safe and easy for kids and beginners, perfect for children’s creativity developing, fun educational experience in mechanical engineering and electronics..
  • 【Including PLA Printing Material & TF Card】It comes with a PLA Filament 1.75mm, enough for printing about 10 models in the size of 80x80x80mm, diversified models in the TF card meeting your needs, and you could go to our manual’s provided website for more models, such as character, education, animal, plant, brain game, houseware, building series, and etc..
  • 【High Speed & High Precision】5-minute fast heating, print precisely with standard nozzle of 0.6mm in diameter to reach the precision of up to 0.1 and a speed of up to 60mm/s. The size of the 3D printer is only 220x160x225mm, very cute mini size, occupy very small place when printing and convenient to carry with..
  • 【Removable Flexible Magnetic Plate】Provide all-round protection to your 3D printer no heated slide-in buil....
Check Stock

DZS Elec 6pcs Mechanical Endstop Limit Switch Touch Switch Module for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280 RAMPS 1.4 LKB01

  • Mechanical endstop limit switch kit, suitable for RepRap 3D Printer or CNC tool, supporting by RepRap electronics, RMAPS 1.4 and other common used....
  • High quality 70cm 22AWG connecting line, thick internal copper core, withstanding 2A current, 300V voltage. Max insulation temperature of insulating....
  • One-piece plug design, easy to install, hard to snap, convenient to plug or release..
  • Connection: Red line connect to VCC (ramps +), Black line connect to GND (ramps -), Green line connect to SIGNAL (ramps s).
  • Common used 1A 125V AC limit switch, strong universality, can be used as switching terminal element of RepRap 3D printer, CNC machine, Arduino / Mega....
Check Stock

6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

Flashforge Adventurer 3 3D Printer Leveling-Free with Quick Removable Nozzle and Heating Bed, Built-in HD Camera, Wi-Fi Cloud Printing

  • 【Leveling Free】– Build plate is well leveled in the factory.Removable and Heating bed,much easier to take down models.It’s suitable for various 3d printer filament PLA,ABS,PETG filament etc..
  • 【New Quick Detachable Nozzle】– loading more smoothly with new nozzle and more compatible with third-party filaments. Remove the nozzle from extruder just in one push.
  • Nozzle fast heated to 240°C in 50 seconds.If you need to print high-temperature filaments, you could purchase additional a 0.3, 0.4, 0.6mm 265℃ nozzle..
  • 【Filament detection function】– Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after user replaces the new filament..
  • 【Out of the box】– Best 3d printers for beginners,super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in mechanical engineering and electronics..
  • 【What you get】– Flashforge 3d printer Adventurer 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and Branded Power Supply, FDM 3D Printers for DIY Home and School Printing Size 8.66x8.66x9.84 inch

  • REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling..
  • SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes..
  • RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages..
  • SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics..
  • WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service..
Check Stock

Yinpecly M4 Knurled Thumb Nuts with Collar Iron Knurled Thumb Nuts Round Knobs 3D Printers Parts Silver Tone 30pcs

  • 【DIMENSION】- Size: 12x8mm / 0.47x0.31 inch (Dia×T).
  • Small end diameter：8mm/0.31 inch. Thread Size: M4 x 0.7mm.
  • 【MATERIAL】- These Thumb Nuts made of good quality iron,rustproof and durable to use.
  • 【ADVANTAGE】- To open and close the air box cover without tools.This facilitates tightening by hand, commonly used in electronics applications.
  • 【APPLICATION】- Common on 3d printer beds, machine tools, cabinets, tool boxes, and great for maker projects and things that need adjusted quickly. Works with bolts, studs and screws.
  • 【FEATURE】- This facilitates tightening by hand, commonly used in electronics applications.
Check Stock

Yinpecly M6 Knurled Thumb Nuts with Collar 304 Stainless Steel Knurled Thumb Nuts Round Knobs 3D Printers Parts Silver Tone 8pcs

  • 【DIMENSION】- 20x12mm / 0.79x0.47 inch (Dia×T).
  • Small end diameter：12mm/0.47 inch. Thread Size: M6 x 1mm.
  • 【MATERIAL】- These Thumb Nuts made of good quality 304 stainless steel,rustproof and durable to use.
  • 【ADVANTAGE】- To open and close the air box cover without tools.This facilitates tightening by hand, commonly used in electronics applications.
  • 【APPLICATION】- Common on 3d printer beds, machine tools, cabinets, tool boxes, and great for maker projects and things that need adjusted quickly. Works with bolts, studs and screws.
  • 【FEATURE】- This facilitates tightening by hand, commonly used in electronics applications.
Check Stock