Reviews 360 degree Servo Motors

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

AEDIKO MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG995)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: Micro Servo Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
Check Stock

35KG Digital Servo Full Metal Gear High Torque Waterproof DS3235 with Two 25T Servo Arms for RC Car Robot Control Angle 180

  • UPGRADED NEW VERSION: DS3235 35KG High-precision, Coreless Stainless Steel Gear, Fully Waterproof, Digital Servo. Included two 25T double-locking metal servo horns.
  • LARGE TORQUE: maximum torque is up to 35 kg/cm (275 oz/in)@6.8V, made of strong copper & aluminum gears.
  • HIGH PERFORMANCE: Equipped with high precision potentiometers and high-resolution digital chip, fast response, strong anti-interference ability, low noise, fast heat dissipation..
  • HIGH ROTATION: well-controlled, 180 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
  • HIGH QUALITY: Waterproof rubber seals screws, made of first-grade material ensure the longevity of the products. CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well..
Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

ANNIMOS 20KG RC Servo Digital High Torque Full Metal Gear Waterproof,180° Control Angle

  • ✔High-precision digital servo upgraded version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
  • ✔Durable - equipped with strong copper & aluminum gears, CNC aluminium middle Shell,to ensure long service life.
  • ✔Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V,with 25T Adjustable metal servo arm.
  • ✔High Rotation - well-controlled,180 degree rotation.
  • 360 degree rotation when power-off, perfect for robot joint activities.
  • ✔Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).
Check Stock

Lego Mindstorms Ev3 Large Servo Motor

  • The EV3 Large Servo Motor is a powerful motor that uses tacho feedback for precise control to within one degree of accuracy. By using the built-in rotation sensor, the intelligent motor can be made to align with other motors on the robot so that it can drive in a straight line at the same speed. It can also be used to give an accurate reading for experiments. The motor case design also makes it easy to assemble gear trains..
Check Stock