Reviews Continuous Rotation Servo Motors

Traxxas 2071 Servo Case for 2070 Servo, 483-Pack

  • 【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • 【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • 【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
  • 【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • 【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Check Stock

Micro Machines Playtronic MAX

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

6 Channel Digital Servo Tester with Over-Current Protection

  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.
  • The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.
  • The voltage that the controller require should correspond to the voltage required by a servo that you controlled.
  • There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation.
  • then press it, remove the center of the state, the knob can continue to control the servo rotation.
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Trane SF AC Condenser Motor - 1/4 HP - 208/230 Volts - 1075 RPM – 48Y Frame - SFMC251SP2V - Replaces Emerson 1860 – A O Smith FSE1026S - GE 3728 - Fasco D909

  • Trane Condenser Motors are designed to survive in harsh environmental conditions, rugged designed and field tested by the engineers and technicians. A reliable condenser motors for air conditioner that can last years to serve you..
  • Trane AC Condenser Motors are UL approved for USA and Canadian market and Class “B” insulated..
  • Trane Air-Conditioner Condenser motors are High Efficiency, Low Power Consumption, Continuous Duty, Contained Air Over, Thermally Protected, Reversible Rotation, Suitable for 48Y Frame mounting brackets, mount in any direction, Shaft Size: 1/2 Inch Diameter x 5 Inch Long..
  • Trane Condenser Motor for air conditioner replaces other brands condenser motors: - Emerson 1860 - AO Smith FSE1026S - Fasco D909 - GE Regal Beloit 3728.
  • Trane Air-Conditioning name stands behind the quality, reliability and superior performance of these Condenser motors. Buy the best, buy Trane AC Condenser motors.
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823

  • Multi-speed, constant torque, brushless DC motor.
  • NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
  • Four discrete speeds using 24VAC, plus automatic continuous fan speed.
  • Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
  • Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
  • DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
  • 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check Stock

2-Pack Metal Aluminum 25T Servo Horn Steering Arms for 1/10 1/8 Scale RC Trucks Cars Buggies Airplane Replacement Upgrade Parts Blue

  • Compatible with:25T Spline & M3 threads,Compatible with Mostly Standard Servo Motors for HSP,Power HD,Futaba, Axial ,Savox ,Xcore, MG995 MG996R MG946R....
  • The Double Arms：47x10x7.5mm (Hole centers at 12 and 20mm from the servo output.).
  • The Short Arm：28x10x7.5mm(Hole centers at 12 and 20mm from the servo output.).
  • Spare part:The RC 25T Servo Horn Steering Arms Easy and convenient to install and remove.Better than most of the plastic material..
Check Stock