Reviews 30mm Nozzle

Philips Sonicare AirFloss to [ air ] Floss for Replacement Nozzle 2 pcs Set HX8012/01

  • For 1 Philips Airfloss HX8211/03 with 1 nozzle, or 1 Airfloss Ultra HX8332/30, HX8332/12 reservoir with 1 nozzle..
  • Portable and compact size, lightweight environmental-friendly plastic material, easy to fit in your pocket or any bags during trips. A perfect travel case to organize your electric flosser and nozzle..
  • This Philips Airfloss Ultra travel case protects your water flosser and water flosser nozzle from getting lost, bumps, dents and scratches..
  • Product dimension: 204*99.6*42.2mm/ 8.03*3.92*1.66 inch.
  • Philips Airfloss HX8211/03, Airfloss Ultra HX8332/30, Airfloss Ultra HX8332/12 and nozzle are not include in the package..
Check Stock

Alyone (12 Pieces Per Pack) 5mm Carburetor Jets for Mikuni Vm22 Vm24 Vm26 125 150 Main Jets (A Set)

  • [High Quality] The main jet kit for motorcycle carburetor is 100% brand new. The carburetor jet kit is made of copper, which is durable, corrosion-resistant, and has a long service life..
  • [Carburetor main nozzle size] Total length 8mm, Diameter of head: 7mm, Thickness of Head: 3mm, Thread: 5x0.75mm.
  • [Usage and compatibility]Carburetor main nozzle is suitable for Mikuni VM22 VM24 VM26 VM30 carbohydrates, widely used in 125cc 150cc 200cc 250cc motorcycle engines.
  • [12 Pcs Carburetor main nozzle A Set] #45-72(#45 #48 #50 #52 #55 #58 #60 #62 #65 #68 #70 #72)..
  • [12 Pcs Carburetor main nozzle B Set] #75-102(#75 #78 #80 #82 #85 #88 #90 #92 #95 #98 #100 #102)..
Check Stock

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

  • 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
  • Nozzle Throat Tube: Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock

1 1/4" Vacuum Attachments Brushes for Small Shop Vac Accessories 1/4 inch or 1 3/8 inch Vacuum Cleaner Accessories

  • ...should be smaller than 1-1/4inch(32mm) which is 31mm or 30.5mm.
  • 1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
  • 1-1/4'' Nozzle Combination Tool, designed to clean the crevice and dust the board.NOT for shark vacuum attachments,DON’T for hoover vacuum attachments,DON’T fit the OEM hose,Not for rigid vacuum,DON’T fit dewalt shop vac,DON’T fit Dirt Devil model .
  • 1 1/4'' Vacuum Attachment Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
  • Vacuum cleaner accessories set includes 1.25" brush & nozzle combination tool, 1.25" round brush, 1.25" flexible flat suction nozzle, 1.25" upholstery tool brush,1.25" utility nozzle with brush, 1.25" crevice nozzle tool. High quality. Easy to install.Easy to clean..
Check Stock

Travel Case for Philips Airfloss Water Flosser HX8211/03, HX8332/30, HX8332/12，Water Flosser Storage Carrying Case (White)

  • For 1 Philips Sonicare Airfloss HX8211/03 with 1 nozzle, or 1 Airfloss Ultra HX8332/30, HX8332/12 reservoir with 1 nozzle..
  • Portable and compact size, lightweight environmental-friendly plastic material, easy to fit in your pocket or any bags during trips. A perfect travel case to organize your electric flosser and nozzle..
  • This Philips Sonicare Airfloss Ultra travel case protects your water flosser and water flosser nozzle from getting lost, bumps, dents and scratches..
  • Product dimension: 204*99.6*42.2mm/ 8.03*3.92*1.66 inch.
  • Philips Sonicare Airfloss HX8211/03, Airfloss Ultra HX8332/30, Airfloss Ultra HX8332/12 and nozzle are not include in the package..
Check Stock

Bibo Eyeful Pencil Eyeliner A - Brown Harajuku Culture Pack

  • Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
  • Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D....
  • output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
  • Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....
  • Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x....
Check Stock

BEETRO HVLP Air Spray Gun 1.3/1.4/1.8mm Nozzle 1000ml Capacity 14.5CFM 30-43psi with 11 Filters 10pcs 190M Paint Strainers Air Control Valve 1/4 Connector and Type 2 Adapter

  • ...olume Low Pressure) technology provides a higher transfer of materials while reducing bounce back and overspray, increase transfer efficiency of the coating materials to the surface (up to 85%). With HVLP technology you also get a significant material savings, which is up to 30-40%.
  • Include 3 sets of stainless steel nozzle sets: The 1.3 mm and 1.4 mm nozzle sets are ideal for use with base coats, clear coats, single stage, primer-sealers, and other light to medium viscosity paint coating materials. The 1.8 mm nozzle set is ideal for primers, 2K primers, surfacers, and other medium to high viscosity paint coating materials.
  • No O-ring design, easy to clean with chemical agents and thinners. Super-precision external mix cap with filter for perfect pattern. Non-drip cup protects against paint wasting and ensures less mess, saving your time and money.
  • 3 adjustable knobs bring in concise painting: fluid control (needle adjust knob) regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. Please always remember: THE MAX WORKING PRESSURE IS 3.0bar(43psi).
  • Can be used with WATER-BASED PAINT. Includes: Air spray gun equipped with 1.4mm nozzle, 1 set of 1.3mm nozzle, 1 set of ....
Check Stock

Anet RepRap i3 3D Printer Aluminum MK2 MK3 Heated Bed 12V, Updated Version of MK2B & MK2A - Hot Bed for Anet A8 A6 A2, Black 220x220x3mm

  • ►0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • ►Heating Compatibility: compatible with all 1.75mm PLA ABS 3D printing block size£º20*20*10MM.
  • ►Package Including:5 piece x 30mm Tube,5 piece x 0.4mm Nozzle,5 piece x Heater Blocks Hotend.
  • ❤Intimate After-Sales:: If you find any problems, please contact us directly, we will give you the most satisfactory answer, thank you!.
Check Stock

SIQUK 33 Pcs 3D Printer Nozzle Cleaning Tools Kit 30 Pcs 0.15mm 0.25mm 0.35mm 0.4mm 0.5mm Cleaning Needles 2 Pcs Tweezers and 1 Pc Cleaning Cloth

  • Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use....
  • Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist.
  • Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap.
  • Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep....
  • Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece....
Check Stock

3D Printer Nozzles, 30PCS Hardened Steel and Brass MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Cleaning Tool Kit for CR-10/ Ender 3/5 , Ender 3/ V2 Ender3 pro

  • Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
  • Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
  • output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
  • Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles.
Check Stock