Reviews 3 jaw Manually Operated Chucks

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

Rockwell RW9275 3/8-inch keyless drill chuck for ¼” Hex Drives

  • This light-duty keyless chuck attaches to ¼” hex drives.
  • Allows screwdrivers with ¼” Hex quick-change chucks to use round-shank drill bits.
  • Traditional 3-jaw design with 3/8 maximum shank capacity.
  • Not suitable for impact drivers or applications involving high torque load.
Check Stock

LANTRO JS - 4 Jaw Lathe Chuck, Z011A Zinc Alloy Self Centering Lathe Jaw Chuck Clamp Accessory for Mini Metal Lathe Power Lathe Accessories

  • 3" Dovetail Jaw for turning items with a larger foot.
  • Designed for use on Supernova/Supernova2, G3, Midi, Titan, and original Nova chucks.
  • Ideally suited for the Nova G3 and Midi chuck for turning smaller items with a big foot.
  • Pictures shows jaws mounted on chuck for illustrative purposes only - the chuck is not included..
Check Stock

1/2\ Annular Cutter Round Shank 3/4\ Adapter for Gunsmithing Drilling and Milling Machines to Reduce Barrel OD (Outer Diameter)

  • 1/2” 3-flat to 3/4 Female, for use in 3 Jaw Drill Chucks.
  • Will hold any cutter with a 3/4 inch shank.
  • [Overall Length: 3 inches] [Shaft Length: 1.250 inches] [Shaft Diameter: .375 inches] [Inner Diameter: .752 inches] [Inner Diameter Depth: 1.325].
Check Stock

3-Pack Keyless Chuck 1/32 to 1/8 Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

  • Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying.....
  • 3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty....
  • One-piece structure design, alloy material, sturdy and durable, more safer than plastic models. The 3-jaw chuck is well-made, and the built-in spring....
  • This replacement keyless chuck provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the....
  • Package content: 3 x multipro shank rotary tool accessories keyless chuck..
Check Stock

Gizhome 13Pcs of M35 Cobalt Drill Bit Set Steel Extremely Heat Resistant Metric Drill Bits with Straight Shank to Cut Through Hard Metals

  • Manufactured from High Speed Steel Twist Drill Straight Shank Cobalt Twist Drill Hand Drill Hole Drill Set.
  • No center punch is needed - the 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander".
  • must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • Material: Drilling Steel, Stainless Steel, Metal and Iron. Particularly successful in cutting through wood, rubber, bamboo and plastic. DO NOT suggest to cut hard metals such as hard metal ,stainless steel and cast iron.
  • Package: Includes 13pcs of steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm.
Check Stock

7-Piece Complete Socket Conversion and Adapter Kit for Ratchet, Extension Bar, Impact Wrench, Impact Driver, Power Drill | Fit All 1/4”, 3/8” and 1/2” Drive Deep and Shallow, Chrome and Impact Sockets

  • Material: chrome vanadium steel. Chrome vanadium steel suitable for heavy duty impact drivers. Spring loaded ball bearings on each square head securely and locks into sockets to avoid slippage during using..
  • This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. The 1/4" hex shank fits all quick change chucks as well as standard drill chucks..
  • Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert..
  • 8pcs 1/4" 3/8" 1/2" CR-V impact socket adapter Sizes: 4 pieces of 1/4 inch drives, 2 pieces of 3/8 inch drives, 2 pieces of 1/2 inch drives. Compatible with power drills and screwdriver handle tools..
  • Suitable for quick change 1/4" chuck systems or directly into drill chuck. Change your hand socket set into a driven socket set..
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...,Rotary diameter of tool rest is 5.51"(140mm),Spindle bore is 1.50"(38mm),Diameter of chuck is 4.92"(125mm),Width of lathe bed is 3.94"(100mm),Thread standard:Metric/imperial/customized.❥This lathe is capable of adjusting set screws for accurate operation..
  • ⚙【High Precision Operation】High Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.In the X axis direction can be automatic feed,Automatic feed speed can be adjusted,Automatic feed range reached 0.01mm-0.4mm.❥The tailstock is movable and fixed with a maximum center distance of 31.5 inch at the far right.With the MT2 taper in tailstock spindle..
  • ⚙【Variable Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR" button.❥Angles can be cleared with one click....
Check Stock

uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M5-M12 Taps, Tap Reamer Tapping Ratcheting Wrench Hand Tool, 295mm (11.61-inch Approx.) Body

  • Tap Wrench: Fit tap size: M5-M12 (Mertic)/ 3.5mm-12mm, 295mm (11.61-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives.
  • Applications: It is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space..
  • Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design.
  • Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places..
Check Stock

uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M5-M12 Taps, Tap Reamer Tapping Ratcheting Wrench Hand Tool, 111mm (4.37-inch Approx.) Body

  • Tap Wrench: Fit tap size: M5-M12 (Mertic)/ 3.5mm-13mm, 111mm (4.37-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives.
  • Applications: It is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space..
  • Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design.
  • Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places..
Check Stock