Reviews 3 in 1 Angle Gauge

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

Black Bolt Gauge SAE Metric Check a Thread Size FastenerLine 901303

  • 29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10.
  • Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools.
  • Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust.
  • Clear scales-All the scales on the acme screw gauge are laser engraving,not painting and the acme thread gauge is not the copy of laser engraving. Don’t worry about the long friction will make the scale unclear.
  • Quality after-sale Service- If you are experiencing quality issues or any problems when you receive this acme thread gauge, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfaction.
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

Neiko 20699A 1/2\ Drive Torque Angle Gauge, Clear

  • Torque angle gauge is used specially for later model engines that require a torque to yield fastener.
  • Easy to use arm attachment is used for holding the gauge in place for an undisturbed work flow while turn plate makes it easy to zero out the gauge.
  • 360 degree scale is large and easy to read with 30 degree intervals and 10 degree increments.
  • Specs: the angle gauge has a 1/2 inch male and female square drive ratchet handle.
  • Gauge measures angle of rotation after pre-torque in torque-angle applications.
Check Stock

Longacre® 52-52007 Magnum 3-1/2 GID Quick Fill Gauge 0-60 psi

  • The large, 3-1/2" glow in the dark face makes this tire pressure gauge easy to read and use any time of the day or night.
  • Connect your air line, press the lever, and fill your tires twice as fast as other air pressure gauges.
  • and there is no need to remove the fill chuck.
  • The tire gauge contains a built-in tire pressure deflator valve to drop your pressure to your desired level and reduce pressure in overinflated tires.
  • The internal check valve allows use as a stand alone tire gauge without the air hose.
  • Features a high flex 17" hose and includes both an angle and ball chuck for added convenience and easy access to the tire valve from any angle.
Check Stock

Little Giant WST2-3060-36 Welded Steel Workbench with Lower Shelf, 4500 lbs Load Capacity, 36\ Height x 60\ Width x 30\ Depth

  • Welded steel workbench with lower shelf and 4,500 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

Little Giant WST2-3672-36 Welded Steel Workbench with Lower Shelf, 4000 lbs Load Capacity, 36\ Height x 72\ Width x 36\ Depth

  • Welded steel workbench with lower shelf and 4,000 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

DeWalt 5140032-78 Replacement Table Saw Miter Gauge

  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

  • VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
  • TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
  • DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
  • ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check Stock