Reviews 3 5 Inch Bracket - BestBuyersPro.com

12Pcs Black Shelf Brackets, 5

Size: 125 x 75 x 20 mm (L x H x W) / 5 x 3 x 0.78 inch.
【COUNTERSUNK SCREW HOLES】 Screw holes are countersunk design.
【HEAVY DUTY CORNER SHELF BRACE】Durable metal corner brackets are made of high quality cast iron with black coated finish, corrosion and rust resistance.
The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
【5″x3″ RIGHT ANGLE BRACKETS】Package include: 12pcs L brackets, 72pcs screws and 24pcs expansion pipes.
【WIDE APPLICATIONS】 Black 90 degree bracket is perfect for shelving systems, widely used in bookshelf, furniture, table, garden and kitchen shelf.
Curved design makes the edge smooth and protect your hand from scratch.
【STRONG BEARING CAPACITY】 Heavy duty corner bracket has 3MM thick, thicker than other corner supports on the marketapply.
So the maximum support weight is 35lbs for a pair of L brackets.

DIMENSIONS: Eye bracket is 5 5/8 inches long by 3 inches wide.
Hook bracket is 6 inches long by 3 3/8 inches wide.
Hook is 2 inches long and is offset 1/2 inch out away from the bracket.
PREMIUM QUALITY: Galvanized steel construction gives it added corrosion resistance and durability.
EASY TO INSTALL: Eye section attaches to the seawall or bulkhead and the hook section attaches to the dock section.
LOW PROFILE: Narrow bracket profiles allow for a minimal gap between the dock section and the shoreline attachment.
WARRANTY: Tommy Dock products are backed by a one year limited warranty.

Material: Iron galvanized. Durable, smooth surface, no scratch, not easy to break or deformation, can be used for a long time..
The vertical louver can be easily and safely installed on the wall. The L-shaped bracket and clip design can be directly fastened without screws, which is simple and convenient. Suitable for the internal or external installation of the vertical louver wall..
wingnaut operation allows easy adjustment for good installation, with 17 / 8-inch rails for easy and safe installation of vertical blinds..
Size: L-shaped bracket: 2 * 5 * 3.5cm / 0.8 * 2 * 1.4 inch.
vertical louver wall bracket, not occupying too much space in the room, durable and light weight, easy to install and store..
You will get 4 sets of brackets (4 L-shaped brackets + 4 clips) to meet your daily needs. The L-shaped bracket can be installed for blinds and other similar curtains..

[Good Function] This plastic, floppy-drive adapter bracket lets you install 2.5inch / 3.5inch floppy drives into a 5.25 inch bay..
[Value Upgrade Of PC Drive Bay] Included mounting screws. Comes with a baffle. Multifunctional combination to improve the use value of PC drive bay..
[Practical] Fits 2 x 2.5 inch HDD / SSD + 1 x 3.5inch HDD..
[High Quality] Made from engineering plastics, strong and durable, which can support long time use..
[Wide Compatibility] This floppy-drive bracket is compatible with standard 5.25inch bay of PC..

They may be trimmed to proper height if needed.
They are meant to be welded to the chassis to provide a mounting point for upper control arm.
Bracket is 3/16 inch thick and has two 5/8 inch holes with 7/8 inch spacing.
Upper control arm bracket is constructed from quality stamped steel.

FEATURE: Adjustable, Rustproof, Long Window Curtain Panel Rod Bracket Holder.
HIGH-QUALITY METAL: This Heavy Duty Curtain Rod Bracket is made of 100% High Quality Zinc, capable of sturdy holding curtain rod with panel with 11 lbs for each bracket..
SIZE: This bracket can be used on up to 1-1/8 inch Rod. Fits 3/4 inch, 1 inch and 1-1/8 inch rods. The projection from the wall is 4-1/2 inch, with 1 inch adjustable length, the maximum length can be extended to 5-1/2 inch from the wall..
EASY INSTALL: This Long Curtain Brackets come with mounting hardware, including 2 screws and drywall anchors, installs in minutes..
VARIETY SELECTION: Available in 7 finishes: Black, White, Oil-robbed Bronze, Brushed Steel/Stainless Steel, Antique Brass, Pewter, and Antique Gold.

L-type horizontal mounting bracket, you can install single-tube preamp, two tubes Preamp, three tubes Preamp..
The surface of the bracket is spray-painted in silver gray for a more beautiful appearance..
The opening diameter of the 3 tube sockets is 19mm, The distance between the sockets is increased in order to facilitate the installation of some larger enthusiast RC components..
Frame size: 150x60x25mm / 5.9x2.36x0.98 inch..
Package Includes: 1pc Large L-type Mounting Bracket, 2pcs Small L-type Bracket, 3pcs Silver Plated Small 9-pin Tube Sockets, 16sets 3*8mm Mounting Screws (Not contain tubes and other parts)..

Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers.
Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops.
The Included U Bolts fit around a 2 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 3 5/16" long..
This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments.
The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull.

Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers.
Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops.
The Included U Bolts fit around a 3 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 4 5/16" long..
This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments.
The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull.

Triple Bullhorn Mounting Bracket for 3 inch round pole, bullhorn led mounting bracket accesaries.
Bullhorn lighting mounting bracket for 3 lights of 2-3/8 slip fitter mounting light.
Bracket is easy to install, hardware screws is including in package..
Led lighting bullhorn mounting bracket for led flood light, shoebox parking lot light, street light.
Demension: For inside diameter 2.7 inch round pole, outside diameter 3 inch round pole, 2-3/8 inch slip fitter led lights.