Reviews 24 Series Pcb Jack

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Black

  • Black anodized aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

EKWB EK-Vector Radeon VII GPU Backplate Nickel

  • Nickle plated aesthetic retention backplate for use with EK-Vector Radeon VII series water blocks..
  • Provides passive cooling for the backside of voltage regulation module (VRM).
  • This backplate is guaranteed to be compatible with reference PCB AMD Radeon VII graphics cards.
  • Backplate covers the whole length of graphics cards PCB.
Check Stock

Potter and Brumfield K10P-11A15-120 Electromechanical Relay, 15 A, 120 VAC, 28.17 mm L x 41.33 mm H x 21.84 mm D

  • Series 34 Slim Electromechanical PCB Relay, 1 pole 6 Amp..
  • Specifications: SPDT 6A, 24V DC coil, AgNi contact.
Check Stock

keenso Servo Signal Reverser, RC Model Aircraft PCB 5.0-6.0V Operating Voltage Servo Signal Reverser

  • Change direction of rotation : Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • Stable performance : High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • Durable to use : The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life..
  • Perfect workmanship : Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • Compact size : Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere..
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ...e to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shape....
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Traxxas 2071 Servo Case for 2070 Servo, 483-Pack

  • 【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • 【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • 【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
  • 【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • 【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Check Stock

Wholesales Authentic RGB Cherry Switch Cherry Mx Switches Keycap Keyswitches Keymodule Mechanical Keyboard Switches Replacement (Brown 3 pin*10PCS)

  • ✔This link is only the shaft and switches for mechanical keyboard,no keyboard and switch tester included..
  • ✔Pls note: This switches can be used with PCB smd led,such as GK61 GK64.No switch led hole on the top cover. 2 pin 4 pin switch plug led can't be used directly with this switches..
  • ✔SMD switches uses together with SMD RGB PCB,the effect is much better than normal switches.
  • ✔ Cherry Brown MX RGB Series 3Pin Mechanical Switch Keyboard Replacement.
  • ✔Before buying, Please make sure that what is your Keyboard Switches，This item is supplied to professionals！.
Check Stock