Reviews 22heater

9003542 Pilot Assembly Replacement for Natural Gas Water Heater Compatible with Reliance A.O.Smith Kenmore State GS and GSX Replaces 100109295,9003542005 12-month warranty

  • 【NEW Upgraded Replacement】- This 9003542 is a new upgraded water heater pilot assembly. Made of premium material. It's designed for Natural gas water heaters and has a temperature setting of 190 degrees, have stable and durable performance..
  • 【High Quality Replacement Part】- 9003542 NAT gas pilot assembly include 22" gas pilot tube, 22-1/2" thermocouple, 21-1/2" ignitor. It's a perfect replacement for your natural gas water heater, make your water heater work normally again..
  • 【Perfect compatibility】- This pilot assembly compatible with Reliance, A.O.Smith, Kenmore, State GS and GSX natural gas water heaters, replaces part number 100109295, 183824-190, 9003530, 9003542005 and AP4867015, can perfect compatible with the specified water heater models, such as 6-30-Yors, 6-30-Yors-d, 6-30-Yort-d FCV, GCV, GVR, XCV and XVR serials.
  • please check the complete models we listed below..
  • 【About Installation】- Prepare tools: screwdriver, pliers.
  • Before you replace the NAT gas water heater pilot assembly, you should cut the gas supply, and take necessary protection measures. Please notice that do not bend the gas pilot tube repeatedly to avoid break it..
  • 【12-month Warranty】- Our 9003542 pilot assembly is made of premium material and have a super lon....
Check Stock

Camplux 16L Outdoor 4.22 GPM Digital Display Propane Gas Tankless Water Heater

  • Easy To Install -It only takes you 5 minutes to set up and it comes with all necessary accesories.To avoid gas leakage caused by improper sealing of the water heater, DO NOT TWINE TEFLON TAPE between gas regulator and gas inlet pipe. The tankless water heater will "caught on fire "with improper operation. Always check gas leakage before operation..
  • 4.22 Instant Hot Water-It only takes you a few minutes to get 4.22 gallons per minute of instant hot water. The camplux portable water heater lights when water pressure between 4.0-110 PSI, low water pressure is perfect for campings and remote cabins..
  • 6-in-1 Protection Ensure Your Safety-Flame failure device, anti-freezing protection, over heating protection to ensure the family safety. The anti-freezing drain plug discharges the residual water to avoid freezing in cold areas for long-time maintenance. Gas supply automatically shut off when high water temperature protection over 167 °F..
  • Power Efficient & Energey Saving -Maximum power output 11,000btu/hour, you will get instant endless hot water easily wherever you are. Compact and lightweight structure with 11.5% energy saving technology. The propane water heater exchanger and main burner are desinged with advanced combustion technology to decrease ga....
Check Stock

HoldRite QuickStand 22 Inch Water Heater Stand, Up to 52 Gallons, Unassembled, 40-S-22-U

  • WATER HEATER STAND: The Holdrite QuickStand Water Heater Stand safely elevates water heaters and other equipment above the floor to prevent gases and other debris from coming into contact with ignition source.
  • WHAT IS INCLUDED: The QuickStand is easy to assemble and includes (2) safety clips and (2) lag bolts.
  • assembled QuickStand measures 22 inches in diameter by 16 inches in height.
  • CONSTRUCTION: Made with galvanized steel, this water heater stand is engineered to support water heaters up to 52 gallons.
  • VERSATILE: This water stand can be installed on concrete or framed walls.
  • can also support other equipment such as tanks, washers, and boilers.
  • CERTIFIED: Water heater stands are compliant with Uniform Plumbing Code and International Plumbing Code requirements.
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
  • Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
Check Stock

GiveBest Tower Space Heater Portable Ceramic Heater 1500W/900W with Remote Control Timer Thermostat Overheat & Tip-Over Protection Rotating Electric Heater for Room Home Office Garage Indoor Use

  • Fast Heating in 3 Seconds with Oscillating Outlet: Powerful 1500 watt PTC ceramic heating element enables this tower space heater to heat 300 square....
  • Wireless Remote Control: The digital space heater comes with smart remote control, allowing you to easily turn the heater on and off, select from....
  • Safe and Reliable to Use: Made of quality-assured flame retardant material and ETL certified, this portable tower heater achieves zero safety hazards.....
  • Quiet for Sleeping Undisturbed: Lower than 50dB level, the electric heater for home is comfortably quiet to use in a bedroom while sleeping. It’s....
  • Energy-efficient Space Heater: 7.3 x 6.7 x 22 inches in size, 5.4 pounds in weight, this heater with a smart automatic temperature control helps you....
Check Stock

Camco 11231 Stand Kit, 21" Gas Water Heater - 50 Gallon Capacity, Silver

  • Gas Water Heater Stand: Allows you to place your residential gas water heater 18-inches above the floor (as required by the National Fuel Gas and Plumbing Codes).
  • Compatibility: Fits gas water heaters with a diameter of 22-inches or less and a capacity of 50-gallons.
  • Measurements: 21-inches x 21-inches x 18-inches.
  • Durable Construction: Constructed of durable, 18-gauge galvanized sheet metal.
  • Easy to Install: Minimal assembly is required.
Check Stock

Lasko Oscillating Digital Ceramic Tower Heater for Home with Overheat Protection, Timer and Remote Control, 22.75 Inches, 1500W, White, 5165

  • ✅【2 QUIET HEAT SETTINGS & ADJUSTABLE THERMOSTAT】This electric space heater features simple electronic controls and an easy to read digital display. Select from 2 heat settings (high 1500 watts / low 900 watts), plus a thermostat-controlled setting, it heats your space quickly and quietly..
  • ✅【MULTI-FUNCTION REMOTE CONTROL】Use the 5-function remote control to turn the heater on/off, select the speed, adjust the temperature, set the timer, or turn on the oscillation from a distance. Plus, there is storage for the remote on the back of the heater.
  • ✅【8-HOUR AUTO-OFF TIMER】The convenient timer mode on this portable space heater allows you to select 1 to 8 hours for your heater to run, then automatically turn off..
  • ✅【WIDESPREAD OSCILLATION】This 1500-Watt space heater features an optional oscillation function. The Patented comfort system and widespread oscillation project heat into the room for maximum comfort and warmth..
  • ✅【BUILT-IN SAFETY FEATURES】Features overheat protection with a safer ceramic element designed to automatically regulate its operating temperature. The exterior heater housing stays cool to the touch and has a built-in carry handle, so you can move it safely from room-to-room. This heater is ETL list....
Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

  • 【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
  • 【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
  • 【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
  • 【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
  • 【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock