Reviews 10 Mm Led

50Pcs LED Lamp Socket Diode Optoelectronic Products Lamp Holders Holder Shell Clip Black Nylon Black Clip Mount Assortment Set for Light Emitting Diode Lighting(3mm)

  • light led holder-Plastic holders are for easily attaching LEDs to boards.
  • light 3mm uv-led-diode-The socket is made of quality plastic material, sturdy and durable to use.
  • fassung support diode-3mm, 5mm, 8mm, 10mm, total 4 different sizes of LED socket for your selection.
  • porta 5 mm-Good workmanship, long service lifespan.
  • 10mm orange clip-1 lot of 50pcs LED plastic sockets, enough for your use.
Check Stock

Bonlux 10W R7S LED Bulb 118mm, J Type 118mm LED Light Bulb T3 Double Ended R7S J118 LED Floodlight Replacement Bulb Daylight 6000K for Floor Lamp, Security Light (2-Pack)

  • Technical Features -- 10W 118mm LED R7S Light Bulb - 12mm/0.47" Diameter, 118mm/4.65" Length - Voltage: AC 120V - Beam Angle: 360°, Non-Dimmable..
  • Super Slim -- Standard R7S 118mm base, the diameter is only 12mm/0.47", Bonlux 10W 118mm R7S LED lamp can replace standard floodlight halogen double ended tubes pefectly..
  • Excellent Heat Dissipation -- R7S LED J118 flood light has high quality ceramic body and PC cover, excellent thermal conductivity, good heat dissipation, low power consumption, superior energy efficiency, reduce expense at electricity bill and frequent bulb changes..
  • Widely Applications -- 118mm R7S LED light for use in Floodlight Replacement Bulb, Work and Security Lights, Workshop Lighting, Stage and Studio Lamp, LED Ceramic Metal Halide Lamp, Floor Lamps, Speciality Lights, General Lighting..
  • Energy Saving -- 10W Double-ended J118 R7S LED Light repalcement for 75W halogen bulbs, save about 90% on your electricity bill..
Check Stock

4.7mm mini 12V instrument cluster Led Bulb ,4.7mm White Blue Red Green LED Lights bulb for cluster LED Lights instrument Dashboard Panel Light

  • ✔ Wide Application Range: Instrument Cluster LED ,Ignition Switch Cylinder LED,Climate Control LED,Radio Controls LED, Steering Wheel Bulb Dash / Indicator Switch LED,Dashboard Cluster LED，Instrument Console LED ,Dash Controls LED,Instrument Cluster LED ,A/C Heater Cluster LED..
  • ✔ Easy Installation:4.7mm 12v Led light bulb are Very Bright,Easy to Use, Energy Saving,Low Power Consumption,Long-Lasting Life..
  • ✔ 4.7mm Clear Mini Led Bulb Build Resistor in it, You Can use it directly in DC12V.Longer Leads are Positive and Shorter are Negative..
  • ✔ Note:Please Verify This is the Right Part Before Ordering.Package Include 10pcs Blue light bulbs,10pcs Whitelight bulbs,10pcs Red light bulbs,10pcs Green light bulbs.
  • ✔ Warranty:It's Perfect for Customers Who are Looking for a Extremely Bright Output,Our Quality are Built To Strict Control Standards..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...nce Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

10-Pack L Shape Connectors and 10-Pack Waterproof LED Strip Clip Connectors, JACKYLED 10mm Wide 4 Pin Unwired Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights

  • MAX WATTAGE: 72W max wattage, these 4 pin connectors can use low wattage and high wattage led light strip. Handy tool for a firmly stable connection,no need to solder..
  • FIREPROOF MATERIAL: The led connectors are not like some cheap thin plastic kind. They are made from PBT material, heat resistant, Anti-burning, No Fire Hazard..
  • APPLICATION: The L shape connectors fit all 10mm wide 4 pin 3528/5050 wide RGB LED strips. While the 4 pin led connectors only suitable for 10 mm wide waterproof 5050 led strips. Perfect for LED light DIY project..
  • EASY TO USE: No soldering required. Simply connect the 4 copper contacts on the back of the prepared LED strip with the 4 pins of the led connectors, and then close the connector clips firmly to connect..
  • PACKAGE: 10pcs l shape led connectors, 10pcs waterproof led strip connectors.
Check Stock

Fntek 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless LED Tape Light Adapter Terminal Extension Connectors for SMD 5050 Multicolor LED Strip (10 Pcs 4PIN RGB Connector)

  • Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
  • Easy to Use: Quick shunt connection and solderless snap down. Open the wire clamp. With a little effort, it will open quickly. Insert the 10mm LED strip into the clips under the two contact feet, making sure that the”+” and “-” correctly.
  • Fireproof Material: Fntek LED connectors are made from PBT material, which is heat resistant. 72W max wattage, which can be used for low wattage and high wattage light strips.
  • Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
  • Package: 10X 4 pin connectors for 10mm SMD5050 LED strip lights. If you have any questions, inquiries or need assistance, please feel free to contact us.
Check Stock

LightingWill 10pcs/Pack Strip Wire Solderless Snap Down 2Conductor LED Strip Connector for 10mm Wide 5050 5630 Single Color Flex LED Strips

  • 2 pin connector for 10mm wide SMD5050 5630 single color LED strip.
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • One end with clip to strip, the other with wires as lead.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2 pin connectors for 10mm SMD5050 5630 single color LED strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7F052 for 8mm 3528 2835 LED strips..
Check Stock

Partsam Blue T10 LED Bulbs Car Interior Dome Lights, 6000K Super Bright 194 168 2825 W5W LED Bulbs for Truck Dome Map Door Courtesy License Plate Lights, 10 Pack

  • T10 LED Light Bulb Blue: Replacement Modle as T10, 168, 194, 2825, W5W, 147, 152, 158, 159, 161, 175, 184, 192, 193. Standard T10 Base Size - 10mm Wedge and 26mm Length, T10 car interior led light bulbs are almost the same size as halogen bulbs..
  • Super Bright 194 LED Bulbs 6000K: Design with 5pcs 5050 SMD chipsets, the 168 light bulb xenon white will provide 360-degree Canbus error-free lighting and 6000K super bright lighting effects..
  • Wide Application: 194 168 LED Car Interior Light Bulb is great for your car's interior map light, dome light, license plate light, reading lights, courtesy light, glove box lights, and trunk light..
  • Easy to Install: T10 2825 W5W LED bulb is Plug and Play. All you need to do is to remove the lamp covers and direct replace them. NOTICE: If the LED does not light up, simply rotate it 180 degrees (reverse the polarity). We do not provide T10 sockets..
  • What You Will Get: 10Pcs Blue 194 168 T10 LED Bulbs and One year warranty provided by Partsam.If you encounter any trouble during the use of the product, please contact our customer service in time..
Check Stock

FSJEE 4 Pin LED Strip Connector Kit for 5050 10mm LED Light Strip,Include 8 Types of Solderless LED Strip Accessories,Provide Most of Parts for DIY LED Strip Lighting Project

  • 1. Application ---- 4pin 10mm LED quick connector kit suitable for 10mm wide SMD 5050 RGB LED ribbon lights,connecting non-waterproof and waterproof LED strips,but need peel off the coating of waterproof LED strips..
  • 2.High Quality ---- Flame retardant PVC is durable and flexible. The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan..
  • 3.DIY Combination ---- RGB Extension cable connector kit-This is a perfect accessory kit for your LED strips.It includes multi of connectors and almost meet all the connectors which used in your DIY colorful LED lighting program and showing the best effects..
  • 4. Easy Installation ---- RGB 4pin 10mm LED strip connectors are flexible and durable,Can be jointed with connectors by yourself.No soldering,no stripping ,just snap down quickly and vigorously with a pliers then you can enjoy your colorful lighting effects.These LED connectors support current Max 3A @24V and Max 6A @12V input..
  • 5. Warranty ---- 24months warranty for all FSJEE LED strip connectors, 90 days money back guarantee for any reason, 24 hours online customer service..
Check Stock

Partsam 194 168 LED Bulbs White, Super Bright T10 2825 Car Interior Dome Lights Bulbs 6000K 5050-SMD Chipsets Error Free for Car Dome Map Door Courtesy License Plate Lights, 10Pcs

  • T10 LED Light Bulb White: Replacement Modle as T10, 168, 194, 2825, W5W, 147, 152, 158, 159, 161, 175, 184, 192, 193. Standard T10 Base Size - 10mm Wedge and 26mm Length, these T10 car interior led light bulbs are almost the same size as halogen bulbs..
  • Super Bright 194 LED Bulbs 6000K: Design with 5pcs 5050 SMD chipsets, the 168 light bulb xenon white will provide 360-degree Canbus error-free lighting and 6000K super bright lighting effects..
  • Wide Application: 194 168 LED Car Interior Light Bulb is great for your car's interior map light, dome light, license plate light, reading lights, courtesy light, glove box lights, and trunk light..
  • Easy to Install: T10 2825 W5W LED bulb is Plug and Play. All you need to do is to remove the lamp covers and direct replace them. NOTICE: If the LED does not light up, simply rotate it 180 degrees (reverse the polarity). We do not provide T10 sockets..
  • What You Will Get: 10Pcs White 194 168 T10 LED Bulbs and One year warranty provided by Partsam.If you encounter any trouble during the use of the product, please contact our customer service in time..
Check Stock