Reviews Led Lamp 5mm 10mm
Halo LZR1320MB Lazer Front Loading Gimbal Lamp Holder, PAR20, Matte Black
- light led holder-【50pcs】Nylon LED Holders is more economical and affordable, 1 lot of 50pcs LED clip assortment kit is enough for your basic use.
- light 3mm uv-led-diode-【Application】Nylon LED holders are for easily attaching LEDs to boards, which is very convenient and practical.
- fassung bulb clips-【Sturdy and Durable】The diode socket is made of quality nylon material, sturdy and durable to use, which can provide reliable performance.
- plastic black 9-12v-【4 Different Sizes】3mm, 5mm, 8mm, 10mm, total 4 different sizes of diode holder light socket for your selection, can meet your different requirements in work and daily life.
- shell red micro-【Good Workmanship】Diode lamp holder has good workmanship, long service lifespan, can offer you the better using experience.
Check StockLED Lamp Assortment Kit, 1 Set of 301 Pieces Short Foot Led Light-Emitting Diode 3Mm 5Mm Red, Yellow, Blue, Green and White Lamp Beads
- LED light emitting diodes. 3mm Luminous Diodes: 40pcs yellow, 40pcs green, 40pcs blue, 40pcs red, 40pcs white.
- 5mm Luminous Diodes:20pcs yellow, 20pcs green, 20pcs blue, 20pcs red, 20pcs white--LED Lamp Assortment Kit.
- Color diodes resistor kit. Forward Voltage: R/Y 2.0-2.2V.
- Max. Current: 20mA--LED Lamp Assortment Kit.
- LED lamp assortment kit. Classified Storage Box: All different types of super bright diodes are separated in a neat kit box and labeled clearly--LED Lamp Assortment Kit.
- Good Repair Replacement: The mini light emitting diodes are convenient for DIY and repair equipment and electrical appliances, circuit unit.
- You can use these to make LED glow stick--LED Lamp Assortment Kit.
- Wide Application: You can use LED diodes to do DIY led projects, school science experiments, car decorations, electronic and electrical experiments, etc.--LED Lamp Assortment Kit.
Check Stock1 Pcs Led Light Bulb 0.50 Watt T-1 3/4 LED12MFWW-DC Midget Flanged Base Lamp | #AA70RK
- You Purchasing 1 Pcs Led Light Bulb 0.50 Watt T-1 3/4 LED12MFWW-DC Midget Flanged Base Lamp.
- Voltage: 12V, Current: 50mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
- Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
- Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Warm White.
Check StockPartsam 30Pcs 3.8
- ...″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
- Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
- As every truck lamp come with two wires, they can only use as one function a time.
- free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
- 5.These are Waterproof, not submersible. Please do not use it under water.
- 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
- Tips and Warranty: 1. These led lights are not dimmable.
- The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative a....
Check Stock1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC - EOV49 | #YY2R
- You will receive 1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC.
- Voltage: 28V, Current: 20mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
- Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
- Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Red.
Check StockMEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)
- ...nce Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
- 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
- -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
- - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check StockHonbay 50pcs Mixed Colour 5mm LEDs Pre Wired Light 12V 20cm Bulb
- High quality material, flexible cable, easy to use.
- For car, boat, industrial, camera, toys, DIY, etc..
Check StockHH Fluorescent LH0450 125-7 Starter Base Lamp Holder With Two Hole Bra
- [Sturdy and Durable to Use]: The diode holder is made of quality plastic material, sturdy and durable to use, having long service lifespan.
- [Convenient to Use]: Plastic diode holders are for easily attaching LEDs to boards.
- [Application]: Suitable for Panel Mount LED indicator, Low Voltage Leddiode, Led Components, Panelmount Lighting, Lamp, DIY Project, Science Experiments, Hobby.
- [Diameter]: 3mm, 5mm, 8mm, total 3 different sizes of LED socket for your selection.
- [Package]: 50pcs LED plastic sockets, enough for your use.
- Easy to use and install, economical and practical.
Check StockEasycargo 100pcs Heatsink Assortment Kit Small Cooler Aluminum Heat Sink Set for Cooling Laptop CPU GPU VGA RAM VRAM VRM IC LED MOSFET Transistor SCR Voltage Regulator Without Thermal Tape
- 100pcs small to medium sizes of heat sink..
- Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H).
- Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H).
- Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5x8.5x8mm, 8pcs 15x15x6.5mm (L*W*H).
- Can be used for cooling of variety of electronics components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor....
Check StockPartsam 10X 3.8 Amber 12V Front Side Marker 6 LED Trailer Truck Lorry Indicators Lights, Amber Rear Led Marker Trailer Parking Turn Signal Lights for Truck Bus Boat Rv Lorries SUV UTV
- ...ape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on.
- We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
- The side marker indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the yellow wire is positive.
- These lights don't come with the on/o....
Check Stock