Reviews 1 Inch J bolts - BestBuyersPro.com

ARONOVA Adjustable Battery Hold Down,Universal Crossbar with 10''length,18-8 (304) Stainless Steel J bolt sets

Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life..
Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/9/10/11/12 inch j bolts..
Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface..
Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc..
Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..

Car battery hold down is made constructed with Premium iron crossbar & 304 Stainless steel j bolt sets, sturdy, and available for long service life.Special spray process for enhancing its corrosion and rust resistance..
Universal adjustable crossbar, from 13.5cm/5.35" to 20cm/7.85" wide, with 8inch J-Bolt..
The surface is anodized for a matte and durable finish. Easy to install and uninstall, provides steady holding for the battery. Please confirm size specifications for fitment before purchasing..
Simple design,easy installation, replace your old battery holder directly..A perfect modification accessory for racing, sports car, RV,boats,etc..
Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..

Our Tripod is made of solid steel,heavy-duty and is user-friendly. You can mount your antenna with it on the wall, on the roof or on your balcony..
Adjustable direction, The mounting pole can be rotated 60 degrees for best reception angle to get strongest signals.
Easy installation, Comes with all the screws and plastic anchors, super easy to assemble..
Perfect for wall or roof mount - This black-coated steel J-mount ensures a secure installation.
18 Inch mount- maximum diameter 1 Inch - Maximum acceptance weigh 66LBS.
Weather Proof - can be installed outside or in the attic and has a black-coating to blend with its environment..
Package Includes - 1 x J-Pole Aerial Bracket, 1x Base, 4 x Wall Screw, 4 x Bolt, 2x Cap.

T-2 Series 2 x 2-inch 12-Gauge Steel Uprights.
1-inch holes spaced 2-inches on the center.
Included: (4) heavy-duty steel uprights, (2) Pin and Pipe Safeties, (2) Weight Plate Horns, (2) J-Hooks with UHMW plastic, 1.25-inch Single Pull-Up....

TALL SQUAT STAND: Featuring (2) 91-inch laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing....
INCLUDED STANDARD J-HOOKS: Our standard, default J-Hook features UHMW plastic core on the backside and the clasp to protect the bar's knurling and the....
STANDARD PULL-UP BAR: Our standard, default front crossmember is the T-3 Series Single Pull-Up Bar with a 1.25-inch diameter. This bolt-on bar....
DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when you are working out heavy, let alone maxing out. Our T-3 Series....
HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your T-3 Series Tall Squat Stand. For safety reasons, Titan recommends a....

Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
For Most Battery Size: This adjustable battery holder can be used for group 21，21R，22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.

Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
Designed for batteries 6.89" (175mm) wide or slightly narrower..
Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).

Our j-bolt hinge is the perfect complement to your door or swinging gate.
The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
For a more in-depth breakdown of dimensions see product images.

Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
Minimum distance between post and gate should be 1.5.

Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
Standard 56J-Frame, C-Flange motor with threaded shaft.
Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.