Ready to get that crankshaft pulley off? Look no further, because we've got the ultimate tool for the job! Our Crankshaft Pulley Tool makes removing stubborn pulleys a breeze, saving you time and frustration. Designed for durability and ease of use, this tool is a must-have for any mechanic or DIYer. Don't let a stubborn pulley slow you down, grab our Crankshaft Pulley Tool and get the job done right!
Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.
- Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
- A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
- Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
- SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock
Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441
- ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
- fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
- Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
- Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
- Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check StockHarmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.
- Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
- A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
- Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
- SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check StockEWK 50mm Crankshaft Pulley Wrench Holder Tool Crank Removal Holding Spanner kit for Honda and Acura Engines
- 【 Specialty Tool 】 EWK professional grade Acura and Honda crank pulley tool.
- holds the harmonic damper pulley in place and keep it from rotating....
- 【 Wide Applications 】 Works with a 1/2 inch breaker bar or ratchet, this crankshaft pulley holder fits the hex shape of harmonic balancer on many....
- 【 Great Compatibility 】 Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing....
- 【 Tough and Sturdy 】 Highly recommended by professional mechanics! Constructed with hardened Chrome-Molybdenum steel alloy, extremely durable and....
- 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....
Check Stock
E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts
- FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
- Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
- KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
- ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
- PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
- 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock
BETOOLL 19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines
- 50mm Crankshaft Pulley Removal Tool: Used to maintain the harmonic damper pulley position and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
- Using of 50mm Tool: Works with a 1/2 inch breaker bar or ratchet. Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain..
- 19mm Harmonic Balancer Socket: BETOOLL socket could be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
- Using of 19mm Tool: Used with 1/2” square drive. This Harmonic Balancer Socket features a deep counter-weighted design to increase torque, so you could quickly and easily break stubborn bolts loose..
- Tough and Sturdy: Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion. Backed by a lifetime replacement guarantee..
Check StockSunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts
- GREAT FITMENT: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
- fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7.
- HIGH QUALITY: Made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust,....
- NICE DESIGN: Designed to hold the crankshaft pulley while loosening or tightening the centre screw. Needn't to remove radiator or other components to....
- USE SIMPLLY: To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2" Drive Wrench. Prevent the harmonic damper pulley from....
- SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Damper Pulley Holding Tool, simply return it for a full refund in 30 days,....
Check StockVMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)
- Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
- Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
- Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
- Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
- Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check StockA-Team Performance - Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet - Compatible with GM 1997-Up LS1 LS Engines
- Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet.
- Compatible with GM 1997-Up LS1 LS Engines.
- Superior Quality: Made of hardened structural 10.9 steel, it is excellent solid and durable with great rust and corrosion resistance to long-lasting service your balancer..
- Wide Compatibility: This LS Harmonic balancer is perfect for your Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod..
- Installation: Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
Check StockCrankshaft Pulley Tool
Finding the perfect crankshaft pulley tool is crucial for any automobile enthusiast or mechanic. With so many options available, it can be overwhelming to make the right choice. That's why we've gathered the best nine crankshaft pulley tools on the market for you. In this article, we'll review each product in detail to help you find the ideal one for your needs.
1. XYZ Brand Crankshaft Pulley Tool: This versatile tool is known for its durability and functionality. It features a sturdy construction that can withstand heavy-duty use. With its easy-to-use design, you can effortlessly remove and install crankshaft pulleys in no time.
2. ABC Company Crankshaft Pulley Tool: If you're looking for a high-quality, professional-grade tool, this one won't disappoint. It is specifically designed to fit a wide range of vehicles, ensuring compatibility and ease of use. The ergonomic handle provides a comfortable grip, making your work more efficient.
3. LMN Pulley Tool: This tool stands out for its innovative design and ease of use. The adjustable arms allow for flexibility in various applications, making it suitable for different pulley sizes. With its robust build, it offers excellent stability and durability.
4. DEF Pulley Removal Kit: Designed for both professionals and DIY enthusiasts, this tool is equipped with all the necessary components to tackle any crankshaft pulley job. Its advanced features, such as a self-locking mechanism, ensure a secure and efficient pulley removal experience.
5. GHI Pulley Installer Tool: This tool is a must-have for anyone who frequently works on crankshaft pulleys. It simplifies the installation process and guarantees proper alignment, reducing the risk of damage. Its compact size makes it easy to store and transport.
6. JKL Pulley Removal Set: This comprehensive toolset is perfect for those who work with various vehicle models. It includes a range of adapters and hooks to cater to different pulley designs. The high-quality construction ensures long-lasting durability.
7. MNO Crankshaft Holder Tool: This specialized tool is specifically designed for locking the crankshaft in place during pulley removal and installation. It offers maximum stability, preventing any rotational movement that could damage the engine. Its compact size allows for easy access in tight spaces.
8. PQR Harmonic Balancer Puller: Engineered for removing stubborn harmonic balancers or crankshaft pulleys, this tool is known for its strength and reliability. It features a simple yet efficient design that guarantees a smooth and safe removal process even in challenging situations.
9. STU Crankshaft Pulley Wrench: This unique wrench offers a convenient and practical solution for pulley removal. Its adjustable design allows for compatibility with various pulley sizes, reducing the need for multiple tools. With its sturdy construction, it ensures a tight grip and prevents slippage.
investing in the right crankshaft pulley tool is essential for a smooth and hassle-free experience. Each of the products mentioned above offers its own set of advantages, so consider your specific requirements before making a decision. Remember, having the right tool by your side can make all the difference in ensuring a successful and efficient crankshaft pulley replacement or installation. 
