Reviews Water Pump Pulley Tool

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

ABN Water Pump Sprocket Retainer Tool - Full-Circle Sprocket Holding Tool Compatible with 2.2L GM Vauxhall Opel

  • [Protect Your Vehicle from Engine Damage] Secure the water pump sprocket with the ABN Water Pump Sprocket Holder to prevent engine vibration and....
  • [Ensure Easy Maintenance] Remove the access plate then line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to....
  • [Fits Your Vehicle] Water pump sprocket retainer holding tool is compatible with 2.2L Ecotec motors found in GM, Vauxhall, and OPEL vehicles.
  • [Built to Last] Heavy-duty steel provides maximum strength and durability while the black-oxide finish resists corrosion.
  • [Package Contents] Each water pump pulley holder tool includes (1) water pump holding tool and (3) 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Small Block Chevy Serpentine System for 283 302 305 350 400 Engines- Power Steering and Alternator

  • Black Anodized Billet Aluminum Pulleys and Brackets CNC machined in the USA backed by our industry leading lifetime warranty!.
  • Works on 283 302 305 327 350 400 Engines With Long Water Pump.
  • Requires a Saginaw Power Steering Pump with Keyway Shaft and GM Alternator.
  • Kit Includes water pump pulley, alternator bracket, alternator fan, alternator pulley and cap, crank pulley, and power steering bracket with pulley. Alternator, Water Pump, and Power Steering Pump NOT included.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set with Adapter Case Hose for Car SUV Truck

  • PROFESSIONAL TOOLS - On the BMW, this fan clutch wrench will help remove the clutch fan to allow you to access the belts, pulleys, water pump, thermostat and much more. Essential tool kit if you want to DIY some of the basic repairs..
  • BUILT TO LAST - Made of premium CV-Steel, the fan clutch wrench removal tool is heavy and solid enough, well machined and finished, with silver tone. They are able to lock the pulley in place and loosen the fan clutch with no issues at all..
  • WHAT YOU WILL GET - You can get 4 pieces fan clutch wrench including 2pcs 32mm fan clutch wrench and 2pcs water pump pulley holder. They are both 15 inches in length, and 0.24 inch, 0.2 inch in thickness, respectively..
  • WIDE COMPATIBILITY - This tool kit is mainly custom for BMW but not limited to the following models of other brands: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, and S14, S38, S54, S50B30, S50B32..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our water pump holder tool within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shopping satisfaction..
Check Stock

Assault Racing Products 2253KIT-BK Big Block Chevy Black Billet Aluminum Gilmer Belt Drive Pulley Kit BBC 427 454

  • Short / Long Style Mechanical Water Pumps up to 5/8in Shaft.
  • Water Pump Pulley, Crankshaft Pulley, Alternator Pulley, Belt.
  • Water Pump and Crankshaft Pulleys are 1:1 Ratio.
Check Stock