Which LVP Floor Cutter is the Best 11: A No-Nonsense Guide

Aug-20-2023 by Grape
Cutting corners while installing Lvp floors? Don't be a lazy chopper, measure twice and cut once! Precision pays off in the long run. Lvp Floor Cutters DIYfails Measure Twice Cut Once

Bona Stone, Tile and Laminate 160 fl. oz

  • EASY TO USE| READY TO USE: Simply squirt and spread - Formula also works perfectly with our Quick Shine Spray Mop and other floor cleaning machines.
  • PREMIUM FLOOR CARE: Quick Shine Floor Cleaners offer premium dirt dissolving, plant-based cleaning plus the cleaning power of natural baking soda.
  • CLEAN AND REFRESH: Naturally cleans dirt, grease and scuff marks without harsh alkalis or ammonia.
  • USE FOR MOST FLOOR SURFACES: Specially formulated for cleaning of hardwood, laminate, LVT-Luxury Vinyl Tile, LVP-Luxury Vinyl Plank, tile, vinyl and stone floors.
  • SAFER CHOICE: Recognized by the U. S. EPA Safer Choice Program - safer for kids, pets and our environment - free from alcohol, ammonia, formaldehyde, paraben & gluten.
Check Stock

Slavic Spirits

  • For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC,....
  • Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp.....
  • If you use it for business purposes, make sure you have a replacement blade. The general floor width is 8 inches, and only about half of the blade is....
  • 37-1/4" Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use. Item Weight 18.7 lbs, DIY For Household....
  • Blades are consumables. If the whole cutter is damaged due to improper operation, it will not be covered by the one-year warranty..
Check Stock

WORKPRO Laminate Floor Cutter With Work Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes from the stone, nails, glass shards faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. Helps reduce knee pressure from heavy work on hard floor or concrete.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

Bona Professional Laminate Pro Series Wm700018175 Stone, Tile Cleaner Ready to Use, 1-Gallon Refill, 128 Fl Oz

  • EASY TO USE | READY TO USE: Quick and easy application - Apply to clean, dry floor for a renewed finish and lasting polish.
  • USE FOR MOST FLOOR SURFACES: Specially formulated for use of hardwood, laminate, LVT-Luxury Vinyl Tile, LVP-Luxury Vinyl Plank, tile and stone floors.
  • PROTECT AND RENEW: Adds a protective layer filling in micro-scratches and evening out the appearance of the floor.
  • PREMIUM FLOOR CARE: Free from aluminum, ammonia, formaldehyde, fragrance, paraben, phthalate and gluten.
  • SAFER CHOICE: Recognized by the U. S. EPA Safer Choice Program - safer for kids, pets and our environment.
  • MADE IN THE USA: Our products are proudly made in the USA.
Check Stock

WORKPRO 13\ Floor Cutter With Safety Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes on any terrain faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. The 600D polyester fabric with breathable mesh for all-day comfort even in summer.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

Quick Shine Pure Floor Wax 27oz | A Buffable, Waterproof Finish for Regular and Hardwood Floors | Restore Protect Refresh

  • EASY TO USE| READY TO USE: Squirt and spread Quick Shine Multi-Surface Pure Wax on freshly cleaned and dried floors with damp mop or sponge. Second or third coat may be applied depending on floor condition.
  • PREMIUM FLOOR CARE: Results last for months on heavily trafficked areas and will not yellow light floors.
  • RESTORE AND REFRESH: Scuffs and scratches can be buffed away giving floors a long-lasting rich beauty and shine.
  • USE FOR MOST FLOOR SURFACE: Can be used on hardwood, laminate, LVT-Luxury Vinyl Tile, LVP-Luxury Vinyl Plank, tile, vinyl, and stone floors.
  • MADE IN THE USA: Our products are proudly made in the USA.
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

Quick Shine Multi Surface Concentrated Floor Cleaner 27oz | Use on Hardwood, Laminate, Luxury Vinyl Plank LVT, Tile & Stone | Dirt Dissolving & Powerful Cleaning | Makes 6 Gallons

  • SAFER FOR KIDS AND PETS: Recognized by the U. S. EPA Safer Choice Program - safer for kids, pets and our environment - free from alcohol, ammonia, formaldehyde, paraben & gluten.
  • USE FOR MOST FLOOR SURFACES: Specially formulated for cleaning of hardwood, laminate, LVT-Luxury Vinyl Tile, LVP-Luxury Vinyl Plank, tile, vinyl and stone floors.
  • CLEAN AND REFRESH: Naturally cleans dirt, grease and scuff marks without harsh alkalis or ammonia.
  • EASY TO USE | COMPACT BY DESIGN: Each 27-fl. oz. bottle makes up to 6 gallons of floor cleaner dilute cup of Concentrated Floor Cleaner with 1 gallon of warm water and mop onto floor.
  • MADE IN THE USA: Our products are proudly made in the USA.
Check Stock

Granite Gold Stone & Tile Floor Cleaner, 32 oz-2 pk

  • Specially formulated for use with most upright hard-floor cleaning machines such as: Bissell Crosswave, Hoover Powerdash, Tineco iFloor, Jashen M12, ionVac HydraClean.
  • Concentrated formula - just follow manufacturer's instructions for filling, operating, and cleaning your hard-floor cleaning machine.
  • Quickly cleans dirt & grime leaving a citrusy Lemon Mint scent behind.
  • Formulated for hard-surface floors like linoleum, stone, terrazzo, vinyl, sealed porous marble, laminate, vinyl LVT/LVP, and no-wax sealed tile (ceramic, Mexican Saltillo, quarry).
  • Waterbased cleaning formula dries fast, doesn't leave any dulling residue behind, and is free of phthalates, parabens, formaldehyde, and ammonia.
  • Meets the U.S. EPA product standards and is Safer Choice Certified for containing ingredients that are safer for people, pets, and the planet.
Check Stock

Personna LVT Flooring Knife with 10 Replacement Blades - Durable Aluminum Body with Convenient Blade Storage in Handle - 61-0800

  • Trusted Durability - This knife was designed with a full Aluminum body for a long lasting carry..
  • Convenient - In-handle replacement blade storage for safe and quick access to 20 replacement blades..
  • Everyday Comfort - Ergonomic design and molded comfort grip for all day use..
  • Razor Sharp Refills - Comes with 10 free Carbon Steel blades! For more blades find our Personna LVT/LVP blades (61-0801 or 61-0802)..
  • Specialized Cutting - For use over varying thicknesses of LVT/LVP and similar materials. These blades have a unique edge profile that makes them better suited for cutting LVT/LVP than normal utility blades..
Check Stock

Lvp Floor Cutters

Hey there, DIY flooring enthusiasts! Today, we're going to cut to the chase and dive straight into the topic of finding the best LVP (luxury vinyl plank) floor cutter on the market. No need for formalities, let's get real and discuss the top contenders!

1. Bullet Tools 13-inch EZ Shear Flooring Cutter
Let's start with the big gun. The Bullet Tools 13-inch EZ Shear Flooring Cutter is a beast when it comes to cutting through LVP. Its guillotine-style cutter delivers professional-grade results, making your installation process a breeze. With a clean, dust-free cut and the ability to handle planks up to 13 inches wide, this cutter is a popular choice for both amateurs and professionals alike.

2. Roberts 10-35 Laminate Flooring Cutter
If you're a budget-friendly option that still gets the job done, the Roberts 10-35 Laminate Flooring Cutter is worth considering. This cutter features a 10-inch cutting capacity and a heavy-duty steel frame, ensuring durability and a clean cut with minimal effort. Its handy angle gauge lets you make precise, angled cuts effortlessly.

3. Crain 812 Super Saw
let's talk about the Crain 812 Super Saw. Though primarily designed for cutting through solid wood, this bad boy can tackle LVP with ease. With its powerful motor and adjustable cutting depth, it's perfect for those thicker, more rigid vinyl planks that can be a bit challenging to cut cleanly. Just remember to always wear ear protection because this beast can be loud!

4. Mantis T-75 Flooring Cutter
For those who prefer a versatile and portable option, the Mantis T-75 Flooring Cutter is your go-to. This cutter is specifically designed for vinyl plank flooring, boasting a 13-inch cutting capacity, a high-leverage handle for easy cutting, and most importantly, it's incredibly lightweight, making it easy to carry around and store when not in use.

5. Bullet Tools 20-inch Magnum Shear Flooring Cutter
Last but not least, we have the Bullet Tools 20-inch Magnum Shear Flooring Cutter. If you're working with larger planks or need to make long, straight cuts, this cutter is for you. With its extra-wide 20-inch cutting capacity and powerful, replaceable blades, it's suitable for professional-grade installations. keep in mind that it comes with a higher price tag, but you get what you pay for.

Now that we've covered our top five LVP floor cutter options, don't let a subpar cutter hinder your flooring project. Choose wisely based on your specific needs, budget, and the type of flooring you'll be working with. Remember, a good cutter can make all the difference in achieving clean, precise cuts and ensuring a smooth installation process.

Happy flooring, folks!