CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)
- FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
- MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
- HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
- INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
- MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check StockVehicle Maintenance Log Book: Easy-to-use Vehicle Service and Repair Record Book
- Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
- Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
- Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
- Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
- Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check StockProPOW Strip Light Mounting Bracket Clip, Cable Holder Clip for 5050 3528 5630 2835 3014 LED Strip Lights(White 60pcs)
- Adhesive Cable Clamp: inner width: 0.45in,outer width: 0.62in, inner height: 0.12in..
- Easy to Use and Dismantling: Easy installation on any clean and dry surface.No need to punch a hole or attach any screws.So it will not damage the items..
- Strong Adhesive Tape: Double-sided foam tape makes super sticky. And usually takes more than 48 hours to exert the greatest viscosity and stabilize it..
- Application: It’s suitable for SMD 5050/3528/2835/5730/3014 LED waterproof strip light within 10mm width and Wires(diameter 0.12 inch MAX). Recommended you to install 3-5 pcs clips per meter..
- Package Content: 60 pcs ProPOW Mounting Bracket Clip.
- With a 90 days warranty and 30 days money back guarantee and friendly customer service..
Check Stock
Lubeworks Oil Control Valve Digital Meter Dispensing Nozzle 10GPM/35LPM Heavy Duty Air Operated Pneumatic 1/2\ inch NPT Inlet Pressure Range 7-725 Psi 5-50 Bar with Flexible Spout (Not for Gasoline)
- SPECIFICATIONS - This Preset Digital Control Valve has a Max Flow rate of 10GPM / 35LPM, at a precision of ±0.5%, handling Viscosity of 8-5000mPas, w/ a Max Pressure Range of 7Mpa 0.5-50BAR / 7-1000PSI.
- Inlet Connection of 1/2" inch NPT Female connecting to industry standard oil hoses and extension reels.
- Battery powered w/ 1x Alkaline Cell 9v Battery, altogether weighing 3.6 lbs, including the Digital Preset LCD Meter and Flexible Spout.
- EFFICIENT - This Preset LCD Digital Meter Control Valve has a 4-digit easy to read screen, w/low battery indicator to avoid sudden shut-off and can measure/dispense in various calibrations of Liters, Gallons, Pints and Quarts.
- Made w/ an aluminum frame, exterior ergonomic oil and waterproof polypropylene shell, with shockproof rubber, to ensure strength and durability.
- Our compact design has zero back pressure capability, delivering consistent measurements and smooth dispensing during operation.
- SAFETY and PROPER USE - Our Control Valves include rubber protection to absorb shock or an impact resistant polypropylene body, both delivering prolonged lifetime in workshops.
- Lubeworks Control Valves are only suitable for: oils, motor oils, synthetic hydraulic oil, gear oil and transmission fluids, w/ a MAX working temperat....
Check Stock
Girl in the Mirror
- Material：Acrylic mirror wall sticker very light and easy to stick to the wall,will not break very safe for child and pets,convenient to move when move place, thicken double-side adhesive viscosity is stronger, will not easy fall off..
- DIY as you like:Set of 4 pieces, Square,each size is approx 12*12 inch/30*30cm,upgrade thickness is 0.08inch/0.2cm, you can buy several sets for bigger area..
- Wide Application:You can decorate your bedroom, wardrobe, hallway, living room, bathroom, vanity any place you need to add brilliance to your room!It is a makeup mirror, Dressing Mirror, is also a decorative mirror!Simple, easy to install, and does not take up space..
- Satisfaction:If you have any question,please contact with us we are glad to help,will thanks for your understanding, safety mirror is not glass mirror,0.5 meter distance will be the best effect of look like mirror, far from 0.5 meters may look like distorting mirros, kids will have fun for the funny face think mirror like a magic mirror..
- Note:There is a protective film on the surface,After sticking it, tear off the protective film, remember not to wipe the mirror surface, which may cause scratches..
Check StockAlphaWorks Double Diaphragm Transfer Pump 1/2" Nitrile/NBR/Buna-N - 12GPM / 45LPM Heavy Duty Aluminum Air Operated Pneumatic Use for Diesel, Kerosene & Oil
- Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
- Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
- Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
- Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
- Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check StockViscometer Adapter 0 Rotor for Digital Rotary Viscometer Viscosity Meter Tester, Low-Viscosity(0-20mPa.s) Liquids Test
- 1.According to ASTM D 4212 (Standard Test Method for Viscosity Cup Immersion)standards.
- 2.Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil..
- 3.Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes.
- 4.Mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect..
Check Stock
GOODYEAR Digital Oil Control Valve Meter Nozzle 10 GPM / 35 LPM Heavy Duty Air Operated Pneumatic 1/2\ inch NPT Inlet Pressure Range 7-1500 Psi 5-100 Bar with Flexible Spout (Not for Gasoline)
- SPECIFICATIONS - This Digital Control Valve has a Max Flow rate of 10GPM / 35LPM, at a precision of ±0.5%, handling Viscosity of 8-5000mPas, w/ a Max Pressure Range of 5Mpa / 0.5-100BAR / 7-15000PSI.
- An Inlet Connection of 1/2" NPT Female connecting to industry-standard oil hose reels and battery-powered w/ 1x 3.6V ER14250 Battery, altogether weighing 3 lbs, including the Digital LCD Meter and flexible spout.
- EFFICIENT & SUPERIOR - This LCD Digital Meter Control Valve has a 5-digit easy to read screen, w/ low battery indicator to avoid sudden shut-off & the ability to measure/dispense in various calibrations of Liters, Gallons, Pints& Quarts. Made of high end quality aircraft aluminum to ensure the strength & durability, while designed to be oil & waterproof. We engineered a compact design w/ zero back pressure capability, delivering consistent measurements & smooth dispensing during operation..
- PROPER USE & SAFETY - Our Control Valves include rubber protection to absorb shock or an impact resistant polypropylene body, both delivering prolonged lifetime in workshops. Goodyear Control Valves are only suitable for: oils, motor oils, synthetic hydraulic oil, gear oil & transmission fluids, w/ a MAX working temperature of -10°C/ 14°F to 60°C/ 140°F. F....
Check Stock
Lubeworks Oil Control Valve Meter Nozzle Preset Digital 10 Gpm / 35 Lpm Heavy Duty Air Operated Pneumatic 1/2\ Inch Npt Inlet Pressure Range 7-1000 Psi / 0.5-70 Bar Flexible Spout (Not for Gas)
- VALVE SPECS - This Lubeworks Preset Digital Control Valve has a Max Flow rate of 10GPM / 35LPM, at a precision of ±0.5%, handling Viscosity of 8-5000mPas, a Max Pressure Range of 7Mpa 0.5-50BAR / 7-1000PSI.
- An Inlet Connection of 1/2" inch Npt Female connecting to industry-standard oil hose reels.
- battery-powered w/ 1x Alkaline Cell 9v Battery, altogether weighing 3.3 lbs, including the Digital Preset LCD Meter and Flexible Spout.
- EFFICIENT and SUPERIOR - This Preset LCD Digital Meter Control Valve has a 4-digit easy to read screen, low battery indicator to avoid sudden shut-off, can measure/dispense in various calibrations of Liters, Gallons, Pints, and Quarts.
- Made of an aluminum frame, exterior ergonomic oil/waterproof polypropylene shell and shockproof rubber, to ensure strength/durability.
- Our compact design has zero back pressure capability, delivering consistent measurements and smooth dispensing during operation.
- SAFETY and PROPER USE - Our Control Valves include rubber protection to absorb shock or an impact-resistant polypropylene body, both delivering prolonged lifetime in workshops.
- Lubeworks Control Valves are only suitable for: oils, motor oils, synthetic hydraulic oil, gear oil and transmission fluids.
Check StockMobil 1 0W-40, Engine Oil, 1 qt.
- Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
- Flash Point: 230 Degrees C Country of Origin (subject to change): United States.
Check Stock
Bigbong 10cc Liquid Dispenser Paints Solder Paste Silicone Sealant Adhesive Glue Syringe Dispensing Needle Syringe Barrel Adapter
- HIGH QUALITY EPOXY MIXING NOZZLE: Made from premium PE thermoplastic resin material, non-toxic, odorless and insoluble in common solvents, low water absorption and good electrical insulation.
- SMOOTHLY MIXING: Epoxy mixing tubes features 17 Cascades and 4 inch length. The liquid from AB plastic tube into the mixing tube in tube flow do cutting restructuring movement, internal spiral design simplify the mixing process, can make glue mixing more evenly.
- EXPOXY TUBES STATIC MIXER SIZE: Inner Diameter: 0.2 inch (5.4mm). Outer Diameter: 0.3 inch (7.6mm). Length: 4.1inch (103mm). Element Number: 17..
- DISPOSABLE STATIC MIXER: The motionless mix tube is designed for adhesive mixing, meter mix machines, concrete repair, carbon fiber applications, gasketing, and potting. We recommend a mixing ratio of 1:1 or 2:1 to guarantee a complete mix for epoxies, composites, polyurethanes, silicones, and methyl methacrylates.
- WIDE APPLICATION: This lightweight and portable applicator is suitable for the mixing of two liquid materials with large differences in viscosity, and it fits for use with 50mL Cartridges/Duo-Pak Epoxy Cartridges.
Check StockGLTL Paint-4 Liquid Viscosity Test Tool w/Viscometer Flow Cup Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester with Base
- ★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
- --The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
- ★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..
Check StockMotul 107972 Set of 2 6100 SYN-nergy 5W-30 Motor Oil 5-Liter Bottles
- Advanced Technosynthese lubricant for High Performance/Protection.
- Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
- Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
- Can be mixed with synthetic/mineral oils..
- Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..
Check StockViscosity Meter
If you’re in the market for a viscosity meter, you may feel overwhelmed by all of the options available on the market. With 13 tricks for buying the perfect one, you can feel confident in your decision making process. Here are some tips to help you find the top 13 viscosity meters out there!
1. Start by doing your research. When looking for a viscosity meter, it’s important to understand what factors contribute to a good meter, as well as what different types of meters there are.
2. Consider the type of sample you will be measuring. There are different types of viscosity meters that are better suited for measuring different types of samples.
3. Determine the viscosity range that you need your meter to measure. You don’t want to overspend on a meter that has a higher viscosity range than you need.
4. Decide whether you need an automatic or manual viscosity meter. Automatic viscosity meters tend to be more expensive, but they can be more accurate and easier to use.
5. Look for viscosity meters with built-in temperature controls. Measuring viscosity at a consistent temperature ensures more accurate results.
6. Consider the size of the sample that you will be measuring. If you need to measure small samples, you may need to look for a smaller viscosity meter.
7. Make sure that the viscosity meter you choose is easy to clean and maintain. Quality maintenance is essential for longevity of your new meter.
8. Check the accuracy of the meter. The accuracy is important to ensure the data you get in your measurements are correct.
9. Take note of the working temperature range. Some viscosity meters have specific temperature ranges in which they can operate, and these ranges will depend on the viscosity range.
10. Look for a meter with a user-friendly interface. A complicated interface will take more time and effort to use to accomplish your goals.
11. Determine whether you need a single-point or multi-point viscosity meter. Multi-point meter provides a range of viscosity measurements to give you a better understanding of your samples.
12. Consider the price. While you don’t want to spend too much on a meter you don’t need, you don’t want to skimp out on quality meters that will not provide accurate results.
13. Look for a warranty. Make sure you have a proper warranty for the product, which will help protect your investment.
finding the perfect viscosity meter is an important decision that should be taken with care. By following these 13 tricks and knowing what you need to find, you can ensure you find a quality meter that meets your needs. Take the time to research and compare different options, keeping in mind the sample type, viscosity range, sample size, accuracy, and other essential factors to make sure you have the perfect meter. A good viscosity meter will provide accurate and precise measurements, helping you achieve reliable results and making your project a success. 
