Top 9 China Bending Machine Review & Buyer's Guide

Sep-04-2023 by Starry eyes
Just spotted a lit China Bending Machine at the corner store! 😍 Gonna grab myself a boba tea real quick! 💃 Obsessed With Asian Snacks

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR SBG-40 Metal Scroll Bender High-Hardened Steel Scroll Bender Combination of Scroll Radius and Angle Bending Universal Metal Rod Bender For Steel Brass Cooper Aluminum

  • 5/8" Bending Capacity: The bender can easily and smoothly bend max thickness stocks the diameter of 5/8" tubes. And The metal bending tool is made of high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 3 in 1 Bender: Our bender has a multi-function of bending. It can achieve angle bending, radius bending and scroll bending. Thus, the machine can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. Max flat steel size: 1-3/16" x 5/16"(30 x 8 mm), max round steel size: 5/8" (15.8 mm) , max square steel size: 19/32" (15 mm)..
  • Energy-saving Structure: The metal bender adopts long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..
Check Stock

Cavnewt Hat brim bender,Hat rack,Hat shaper,Hat organizer for baseball cap,Hat pins for fitted hats,Fitted hats for men,Hat curving band,Hat bender brim,Hat curving tool,Fitted hat,Caps

  • 【Easy to use】Insert the hat into the hat bending tool and leave it for more than 24 hours, the curve of the brim can be perfectly displayed. Use the hat bending tool to stand for more than 24 hours before participating in activities or wearing a hat, and the curve after bending is perfect..
  • 【No environmental restrictions】The hat bending machine is easy to carry and can be used on the table, door hat rack, hat hook, and can also be used outdoors.
  • 【Sturdy and durable】The hat shaper uses high-quality abs, which is flexible in bending and will not be easily broken, caught by the door, and will not break.
  • 【Two options】The hat stylist has a large radius of 2.5 inches and a small radius of 2 inches. The edge bending machine has two bending radii to choose from, and the shape after bending is different..
  • 【Wide Applicable】The hat bending tool is suitable for all visor hats,suitable for sun hats,baseball caps,fishing hats,hunting hats,cowboy hats,sun hats,casual hats, Ashland Cap,Canvas Mesh-Back Cap,Pizza Hat,Trucker Mesh Cap.
Check Stock

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

  • MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
  • BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
  • IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
  • GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
  • as to round steel and square steel, it can bend 0.394”..
  • DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..
Check Stock

UPANBIKE MTB Mountain Bike Bicycle Extra Long Handlebar φ31.8mm*720mm Riser Bar(Black)

  • 【Material 】:Aluminum Alloy 6061,hard anodizing and numerical controlled precision bending,excellent shockproof and maximum firmness.(Please attention the blue handlebar's real color is as the installtion image shows.).
  • 780mm/30.71inch. Extra long allows more space to install more accessories,let you control your bike easily in complex terrain..
  • 【Clamp diameter(middle of the handlebar)】:31.8mm.
  • 【Riser】: 50mm. Sweep back angle:9°。Ergonomic structure,CNC precision bending. Comfortable and non-slip..
  • 【Shipping time】:If order is fullfilled by Abuyamoy(seller), it's shipped from China, normally it takes 7 to 15 business days.If it's fullfilled by Amazon(FBA),it will be very fast..
Check Stock

MELDIKISO Manual Acrylic PVC Plastic Strip Heater 48'(1200mm) Bending Machine Bending Tool 1-6mm Thickness

  • The Bender Heater Heating Thickness1mm - 6mm.
  • If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet..
  • The acrylic bending machine heater can bend all kinds of plastic sheet, Acrylic, Plastic, PVC, Plexiglass. The body is made of special aluminum extrusions. the effective heating length is 1220mm (48")..
  • This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED Channel Letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates..
  • With circulating cooling water system on both sides of heating pipe can make sure other parts (no heating is required) won’t get thermal deformation..
  • We are US seller, item ship out in 2days. Please note that the machine and accessories may be shipped in 2 separate packages..
Check Stock

China Bending Machine

1. XYZ Machine - This bending machine offers a wide range of features, including adjustable bending angles, high precision, and user-friendly controls. It is ideal for professionals who require flexibility and accuracy in their metalworking projects.

2. ABC Machine - With its durable construction and powerful motor, this bending machine is perfect for heavy-duty applications. It can handle a variety of materials, including steel, aluminum, and copper, making it suitable for a wide range of projects.

3. DEF Machine - Featuring a compact design, this bending machine is perfect for smaller workshops or projects that require portability. Despite its size, it still offers impressive bending capabilities and precise results.

4. GHI Machine - This bending machine is designed with versatility in mind. It can handle a variety of bending tasks, from simple bends to more complex shapes. Its advanced features, such as automatic angle calculation, make it a popular choice among professionals.

5. JKL Machine - If you are speed and efficiency, the JKL Machine is a great option. It boasts a quick bending speed, allowing you to complete projects in less time. it has a user-friendly interface, making it easy to operate.

6. MNO Machine - This bending machine stands out with its durability and reliability. Built to withstand heavy use, it is a favorite among industrial users. Its robust construction ensures stability and precision, even when working on large-scale projects.

7. PQR Machine - Combining modern technology with ease of use, the PQR Machine is perfect for beginners and DIY enthusiasts. It offers intuitive controls and a wide range of bending options, making it suitable for various applications.

8. STU Machine - If you need a bending machine that can handle thick materials, the STU Machine is worth considering. With its strong motor and sturdy frame, it can effortlessly bend even the toughest metals.

9. VWX Machine - The VWX Machine is a reliable and cost-effective solution for those on a budget. Despite its affordability, it still delivers consistent and accurate bending results.

Buyer's Guide:

1. Purpose - Consider the type of projects you will be working on and choose a bending machine that accommodates your specific needs.

2. Material Compatibility - Make sure the machine can handle the type and thickness of materials you work with.

3. Bending Capacity - Determine the maximum bending capacity required for your projects and select a machine that can meet those requirements.

4. Ease of Use - Look for machines with user-friendly controls and features that simplify the bending process, especially if you are a beginner.

5. Durability - Check the construction and build quality of the machine to ensure it can withstand heavy use without compromising accuracy.

6. Safety Features - Look for bending machines with safety mechanisms in place to protect the user during operation.

7. Budget - Set a budget and compare different models to find the best value for money within your price range.

finding the right China bending machine involves considering various factors such as purpose, material compatibility, bending capacity, ease of use, durability, safety features, and budget. By utilizing this review and buyer's guide, you can make an informed decision and find a bending machine that meets your specific requirements.