Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable
- The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
- This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
- This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
- Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
- simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
- We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock
Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board
- Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
- Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
- The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
- Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
- All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
- High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
- Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check StockKOOBOOK 2Sets HX1838 NEC Infrared IR Remote Control Sensor Module IR Receiver Module DIY Kit for arduino
- Operating voltage 5V.Output form: Digital output..
- VCC: 3.3V-5V external voltage (can be directly connected to the 5v microcontroller and 3.3v microcontroller).GND: external GND.IN: external microcontroller I/O port, I/O port has been designed 10K pull-up resistor..
- Kit theory test distance of about 5-8 meters, but the practical application depends on the ambient factors you use, as well as the middle barrier (such as diaphragm, glass, obstructions or other material blocking), receiving head with HX1838 with power work instructions lights, receive 38K frequency any remote coding data..
- remote Control Battery:CR2032 Button batteries (Not Included).
Check Stock
Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython
- The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
- The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
- The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
- The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
- Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check StockEmporio Armani Mens ART3016 Analog Display Quartz Black Smart Watch
- Compatibility: android os 5.0+, iphone 5/ios 9.0+.
- connectivity: battery life: up to 1 year based on usage.
Check StockArduino Mega 2560 REV3 [A000067]
- Arduino Mega 2560 is designed for your most ambitious projects which require additional pins and extra memory.
- Based on the 8-bit AVR microcontroller ATmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches.
- Compatible with most shields designed for the Arduino Uno.
- Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users..
Check StockSparkFun RedBoard - Compatible with Arduino Breadboard-able Development board w/ R3 footprint Microcontroller serves as physical computing learning platform Connect to computer with USB Mini-B
- ATmega328 microcontroller with Optiboot (UNO) Bootloader. Compatible with Arduino IDE. R3 shield compatible..
- USB Programming Facilitated by the Ubiquitous FTDI FT232RL.
- Input voltage - 7-15V 0-5V outputs with 3.3V compatible inputs.
- You'll also need a mini-B-to-A USB cable It powers the RedBoard and allows you to upload programs to it.
Check StockDEVMO NEO-7M GPS Satellite Positioning Module with SMA Antenna Interface Compatible with Ard-uino STM32 C51 Replace NEO-6M
- ★Get 51 Ard-uino STM32 microcontroller routine..
- ★with a USB interface, you can watch the computer positioning effect directly phone line..
- ★with the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects..
- ★with SMA interface can be directly connected to an active antenna SMA..
- ★TTL level, compatible with 3.3V/5V systems. TTL level, compatible with 3.3V/5V systems..
Check Stockkuman Compatible For Arduino Raspberry pi Sensor kit 37 in 1 Robot Projects Starter Kits with Tutorials Compatible for Arduino RPi 3 2 Model B B+ K5
- Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for ARDUINO, BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+.
- Complete Update and common models for arduino Mega 2560 starter kit.
- Great sensor kit with tutorials compatible for Arduino and raspberry pi..
- Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Detailed tutorials including project introduction and source code CAN BE PROVIDED..
Check StockArduino Vidor 4000 [ABX00022]
- The best of the embedded world: a low power microcontroller to handle reprogramming, communication, and analog sensing, together with an FPGA to perform high speed computation, and a dual WiFi-BLE chipset for wireless communication..
- Mini HDMI output / MIPI camera input: can capture sound in real time, create a real-time computer reading sensor information,sending it to monitor or capture video, overlay sensor information on the image and send it to a screen..
- Ideal for: Industry 4.0, home automation, computer vision, aerospace, telecommunications.
- Part of the Arduino Maker Board Family for IoT Devices, easy to program with Arduino Software and Intel’s FPGA suite..
- Easy interface between the microcontroller and the FPGA at the software level..
Check StockSainSmart USB 4 Channel Relay Automation (5V)
- NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
- Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
- Module with overcurrent protection and relay diode freewheel protection..
- NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
- NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check StockELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant
- The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
- The chip is Atmega + 2560-16au and 16u2, same with the official version..
- Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
- Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
- It contains everything needed to support the microcontroller.
- simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check StockDorhea 37 in 1 Sensor Modules Kit with Tutorial for R3 Board Mega2560 Mega328 Nano Compatible with IDE Raspberry Pi
- 37 in 1 sensor module Kit is complete update and common models,compatible with arduino R3, MEGA 2560, NANO and Raspberry pi..
- All components compatible with Arduino IDE, can be used directly..
- Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
- Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, There are tutorials in the CD that comes with..
- Complete Update and common models for arduino NANO R3 Mega 2560 starter kit..
Check StockMicrocontroller compatible
Microcontrollers are small and powerful computers that can be programmed to perform a variety of tasks. They can be used for anything from controlling robots to automating home systems. If you are in the market to buy a microcontroller, you need to know what to look for to ensure that you get the right one for your needs. In this buying guide, we will provide you with the top 13 microcontroller compatible buying tips.
1. Purpose - Start with the end in mind. What do you need the microcontroller for? Knowing the end goal will help you select the right microcontroller.
2. Processing power - The processing power of the microcontroller is critical. Consider the needs of your project and choose the microcontroller accordingly.
3. Memory and storage - Microcontrollers come with different amounts of memory and storage. Ensure that it has enough to support your project.
4. Input/output options - Consider the number and type of input/output options required for your project.
5. Connectivity - The connectivity options for your microcontroller are as critical as the processing power and input/output options. Ensure that it meets your connectivity needs.
6. Power consumption - Microcontrollers come with varying power consumption rates. Ensure that it is optimized for your project's requirements.
7. Programming language - Microcontrollers support different programming languages. Choose a microcontroller that supports the language you are comfortable with.
8. Development environment - Ensuring that the microcontroller has a suitable development environment is critical.
9. Microcontroller size - The size of the microcontroller is an essential consideration. Small microcontrollers are suitable for projects with size constraints.
10. Price - The cost of the microcontroller should be considered. Purchase one that fits within your budget.
11. Availability - The availability of the microcontroller is another consideration. Ensure that it is readily available for purchase, and be aware of any supply shortages.
12. Technical support - Microcontrollers can be complex to use. Ensure that the manufacturer offers quality technical support, including documentation, user forums, and customer service.
13. Compatibility with Accessories - Consider the compatibility with other accessories or components that you need to use with your microcontroller.
By considering these thirteen factors when buying a microcontroller, you will be able to select the right one for your needs. Keep in mind that there is no one-size-fits-all when it comes to microcontrollers. if you follow these tips, you'll have a better chance of selecting the perfect microcontroller for your project. 
