Reviews odroid Power Supply

TOPGREENER High Speed USB Wall Outlet, 15A Tamper-Resistant Receptacles, Compatible with iPhone, Samsung Galaxy, LG, HTC & other Smartphones, UL Listed, TU2154A-GD, Gold

• ... One M9, Dell, Motorala, Sony, Nokia, Lenovo Yoga/ThinkPad, Acer tab and more, Smart phone four-in-one OTG data cable micro USB splitter a drag four auxiliary power supply.
• 【Enhance Your Device】Expands into 3 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifi), Orange Pi, ODROID, Banana Pi ,Raspbian Jessie Tablet.
• 【Compact Multifunction HUB】There are three USB ports, you can insert U disk, keyboard, mouse and other equipment (but does not support the simultaneous insertion of two U disk), and the other with a micro USB female, you can switch to the U-switch or keyboard power supply.
• 【Achieve Your Work efficiently】OTG port provides a simple way to connect phone to a USB capable computer for data synchronization and file transfers, Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps. Please NOTE only for Micron USB connector smart phone or tablet.
• 【NOTE】AVOID CONNECTING WITH FAST CHARGER.Make sure the output of the charger is 5V (4.7-5.3V) / 2A.The chip inside the hub will be BURNED OUT if the VOLTAGE > 5.3V.

SunFounder Raspberry Pi UPS Power Supply Module V2.0 Supports Pass Through Charging, 5V/3A Lithium Battery Power Pack Expansion Board Compatible with Raspberry Pi 4, 3 and All Model B/B+

• ➢Raspberry Pi UPS - A Power Supply Module designed for Raspberry Pi UPS compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/ODROID-C4..
• ➢Pass Through Charging - Requires two 18650 Batteries (not included), with Pass through Charging function, it can power to the Raspberry Pi while charging ..
• ➢Over Charge/Discharge Protection - Charging ends when the total battery voltage reaches 8.4V. When the single battery voltage is below 3.2V, the battery protection activates and the battery is no longer discharged..
• ➢Balance Charging & Over Heating Protection - The battery charging current will be reduced or even discharged if the voltage of a single battery exceeds 4.2V. If the temperature reaches 75 degrees Celsius, the DC-DC will shut down to prevent overheating damage..
• ➢UPS Output: 5V/3A, UPS Input: 5V/2A, Dimension: 90mm x 56mm x 24mm.

SBC Wifi Module 4 for ODROID XU4 C2 C1 H2

• For those who wants to protect the ODROID-C2 board from dust and the elements.
• The drawings of the case is open in AutoCAD and STEP format by Hardkernel..

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

• Expands into 4 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifii), Orange Pi, ODROID, Banana Pi.
• Compatible with Samsung Galaxy S2, Samsung Galaxy Note, Samsung Galaxy S3/S4, Galaxy Tab3 8.0, Sony Xperla NX-02D, Sony Xperla acro HDIS12S.Toshiba REGZA Phone-TO1D, and Sony S-series Tablet..
• Draws power only from OTG port, current for USB devices is limited to host capability.
• With USB2.0 4-Port Hub, for Mouse, Keyboard, U disk, Camera, Printer and so on. Easy plug and play installation device, no external power needed No driver needed for Android and PC with USB 2.0 port Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps.

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3, Libre Computer Board, ASUS Tinker Board (Translucent)

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
• TRANSLUCENT WITH FRONT LED AND IR: Sleek design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
• MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best r....

C4Labs Zebra Case - for ODROID-C2 REV 0.3- Black Ice

Volvox sp, Living

• 【High Precision, Low Ripple, Big LED Display, Output Switch Control】NICE-POWER 120V 3A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digits LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjust the required voltage and current through the output switch button without the actual output power, safer and more energy efficient..
• 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 120V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, aging test, DIY, etc..
• 【Front Power Switch , Stable Vertical Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during ....

NICE-POWER DC Power Supply Variable: 30V 10A Adjustable Switching Regulated High Precision 4-Digits LED Display 5V/2A USB Port Output & Input Power Cord Bench Lab Power Supplies

• 【High Precision, Low Ripple, LED Display, Auto Switch C.C/C.V Mode】NICE-POWER 30V 10A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digit LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjustable power supply has C.V/C.C indicator light, constant voltage and constant current mode can automatically complete the switch..
• 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 30V DC power supply has multiple protections: Overvoltage protection, Overcurrent protection, Overheating protection, Over power protection, Short circuit protection, Leakage Protection. DC power supply is suitable for laboratories, schools, electronic maintenance , Electrolysis, electroplating, lamp test, aging test, home DIY, scientific research and teaching, etc..
• 【Front Power Switch , Stable Horizontal Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts Stable Horizontal Design, DC power supply has Shock Absorber Rubber Feet at the bottom, so it will be safer and more stable during use. DC....

DC Power Supply Variable, Bench Power Supply with Output Switch, Short Circuit Alarm, Adjustable Switching Regulated Power Supply 30V 5A with 4-Digits LED Power Display, USB Quick-Charge Interface

• 【High Precision, Low Ripple, LCD Display, Auto Switch C.C/C.V Mode】NICE-POWER 30V 10A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digits LCD display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjustable power supply has C.V/C.C indicator, constant voltage and constant current mode can automatically complete the switch..
• 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 30V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, aging test, DIY, etc..
• 【Front Power Switch , Stable Vertical Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during use. DC powe....