Reviews Zinc plated Anchors

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

Drywall Self-Drilling Anchor with Screw Kit Anchor Screw Combination No Drill Or Hole in Wall for Hanging TV Shelf Strap Cabinet Decoration Fixing Curtain (50 Sets,0.47 x 1.18 Inch,0.47 x 1.57 Inch)

  • Ample quantity: the package includes 25 pieces 0.47 x 1.18 Inch/ 12 x 30 mm drywall self-drilling anchors and 25 pieces 0.47 x 1.57 Inch/ 12 x 40 mm drywall self-drilling anchors with 50 pieces of screws kit, 100 pieces/ 50 sets, meeting your multiple daily decorative needs, like drilling directly into drywall.
  • Pretty quality: the anchors and screws combination is derived from carbon steel and plated with yellow zinc for a long service time, strong and long-lasting, not easy to fade and deform.
  • The yellow zinc-plated screws are corrosion resistant, which makes their service life even longer and easy to control.
  • Thoughtful design: the drywall self-drilling anchor will expand while tightening the screw in to increase its holding power.
  • And the tapered pointed head is easy to install, the serrated design on both sides can make the metal anchors to provide more holding power.
  • No hole or drilling: when you use the wall anchor and screw kit, there are no hole or drilling required, ensuring that the screw and item are easily removed from wall for next time usage.
  • Besides, there will be no hole left in the wall.
  • The expansion is more complete, so you don't worry that the hanging items will fall.
  • Broad usage: the anchors and screws combination is suitable for ins....
Check Stock

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Drywall Self-Drilling Anchor with Screw Kit Anchor Screw Combination No Drill Or Hole in Wall for Hanging TV Shelf Strap Cabinet Decoration Fixing Curtain (50 Sets,0.47 x 1.57 Inch)

  • Ample quantity: the package includes 50 pieces 0.47 x 1.57 Inch drywall self-drilling anchors with 50 pieces of screws kit, 100 pieces/ 50 sets, meeting your multiple daily decorative needs, like drilling directly into drywall.
  • Pretty quality: the anchors and screws combination is derived from carbon steel and plated with yellow zinc for a long service time, strong and long-lasting, not easy to fade and deform.
  • The yellow zinc-plated screws are corrosion resistant, which makes their service life even longer and easy to control.
  • Thoughtful design: the drywall self-drilling anchor will expand while tightening the screw in to increase its holding power.
  • And the tapered pointed head is easy to install, the serrated design on both sides can make the metal anchors to provide more holding power.
  • No hole or drilling: when you use the wall anchor and screw kit, there are no hole or drilling required, ensuring that the screw and item are easily removed from wall for next time usage.
  • Besides, there will be no hole left in the wall.
  • The expansion is more complete, so you don't worry that the hanging items will fall.
  • Broad usage: the anchors and screws combination is suitable for installing drywall in homes, offices or any other buildings.
Check Stock

Self-Drilling E-z Anchor Toggle Kit, Heavy Duty Drywall Toggle Ancor with Fitting Metal Zinc Phillip Screws #8 x 2-1/4 - Holds Up to 100 Lb. (5 Pack)

  • {EASIER-BETTER} Metal–Zinc is much stronger than other self-drilling drywall anchors, On there is no hole preparation required, and it goes in fast and smoothly because it has a sharp end, and also because of its high quality and is MADE IN the USA..
  • {ZINC–TOGGLE} The benefit of using zinc rather than plastic is, that it won’t split in half like the plastic when the screw goes in, and the benefit of a toggle is that it gets tight from both sides and can hold weight up to 100 Lb. & can be easily removed..
  • {MULTI PURPUSE} Unvert self-drilling Zinc anchors are made for Hang pictures, decorative plates, and shelves. and suitable for installing in drywall, concrete, brick, tile, plaster, stucco, wood, and similar materials, it is so strong and powerful that it drills directly into drywall even if you hit a wood stud..
  • {UNVERT FOR ALL} It’s not only designed for construction users, we specially designed a few Styles of packaging, that you should be able to use for personal use in your home or office just to hang up some heavy shelves for long-lasting convenience..
  • {KIT CONTENTS} 5 Toggle anchors & 5 Phillip Screws #8 x 2-1/8" – Total of 10 pieces - This type has a deep thread & locks into many sizes of drywall 3/8”, 1/2” or 5/8” gypsum wallboar....
Check Stock

Self-Drilling E-z Anchor Toggle Kit Heavy Duty Drywall Toggle Ancor with Fitting Metal Zinc Phillip Screws #8 x 2-1/4 - Holds Up to 100 Lb 25 Pack

  • EASIER/BETTER: Unvert Metal–Zinc is much stronger than other self-drilling drywall anchors, this on there is no hole preparation required, and it goes in fast and smoothly because it has a sharp end, and also because of its high quality and MADE IN USA..
  • ZINC–TOGGLE: The benefit from using zinc rather than plastic is, it won’t split in half like the plastic when the screw goes in, and the benefit from toggle is that it gets tight from both sides and can hold weight up to 100 Lb., & can be easily removed..
  • MULTI PURPUSE: Unvert self-drilling Zinc anchors are made for Hang pictures, decorative plates, shelves. and suitable for installing in drywall, concrete, brick, tile, plaster, stucco, wood and similar materials, it is so strong and powerful that it drills directly into drywall even if you hit a wood stud..
  • UNVERT FOR ALL: It’s not only designed for construction users, we special designed a few Styles of packaging, that you should be able to use it for personal use in your home or office just to hang up some heavy shelves for a long-lasting convenience..
  • KIT CONTENTS: 25 Toggle anchors & 25 Phillip Screws #8 x 2-1/8" – Total of 50 pieces - This type has a deep thread & locks into many sizes of drywall 3/8”, 1/2” or 5/8” gypsu....
Check Stock

Self-Drilling E-z Anchor Toggle Kit Heavy Duty Drywall Toggle Ancor with Fitting Metal Zinc Phillip Screws #8 x 2-1/4 - Holds Up to 100 Lb 10 Pack

  • {EASIER-BETTER} Metal–Zinc is much stronger than other self-drilling drywall anchors, On there is no hole preparation required, and it goes in fast and smoothly because it has a sharp end, and also because of its high quality and is MADE IN the USA..
  • {ZINC–TOGGLE} The benefit of using zinc rather than plastic is, that it won’t split in half like the plastic when the screw goes in, and the benefit of a toggle is that it gets tight from both sides and can hold weight up to 100 Lb. & can be easily removed..
  • {MULTI PURPUSE} Unvert self-drilling Zinc anchors are made for Hang pictures, decorative plates, and shelves. and suitable for installing in drywall, concrete, brick, tile, plaster, stucco, wood, and similar materials, it is so strong and powerful that it drills directly into drywall even if you hit a wood stud..
  • {UNVERT FOR ALL} It’s not only designed for construction users, we specially designed a few Styles of packaging, that you should be able to use for personal use in your home or office just to hang up some heavy shelves for long-lasting convenience..
  • {KIT CONTENTS} 10 Toggle anchors & 10 Phillip Screws #8 x 2-1/8" – Total of 20 pieces - This type has a deep thread & locks into many sizes of drywall 3/8”, 1/2” or 5/8” g....
Check Stock

3/8\-16 Double Expansion Shields - (Pack of 12)

  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together..
  • The band or shield is designed to expand during installation..
  • The anchor sits flush with the base material and is designed to accept a screw or bolt..
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration..
  • Screws and bolts can be removed or replaced after installation..
Check Stock