Reviews Zinc Coil

INTEY Metal Detector Waterproof for Adults Kids Adjustable(35

  • funny Treasure hunt - this is a detector for the enthusiast with an adjustable stem extending from 33. 5 to 45, so not only metal detectors for adults, but also for kids. Providing families with unique leisure, start Treasure hunting journey..
  • HIGH-ACCURACY - Kinds of metals includes coins, relics, jewelry, gold, silver, ring and key can be detected through the 8-inch coil. The coil is adjustable by 180 without dead angle detection..
  • two modes - Waterproof metal detector has 2 modes. Disc mode can eliminate the target you don't want, for example, Iron, Zinc, and coins. Also can turn to all metal - mode, all metals can be detected..
  • IP67 WATERPROOF - Both the stem and the coil at the end are waterproof, so can safely use it in the water, especially suitable for use outdoors, on the beach or in the stream. But it should be noted that the display panel should be carefully away from water because powered by a 9-volt alkaline battery(not included)..
  • volume &power - adopts a 3. 5mm audio jack, enjoy your own world of exploration! The device is equipped with buzzers and LED light alert to remind you to avoid you missing Treasure..
Check Stock

Pair Rockville X6.5C Competition 6.5

  • ...m Bullet, Design: Open-Basket Mid-Bass, Sensitivity: 90dB, Frequency Response: 110Hz-10KHz, Impedance: 4 Ohms, Reinforced Black Pulp Cone, Linear Progressive Polyester-Cotton Composite Spider, Aluminum Bullet Phase Plug High SPL Design, High Tinsel Expanded Steel Basket, Cloth surrounds reproduces very clean sound, Zinc-Plated T-Yoke/Washers, Super Slim Design Facilitates Door Installations, 1.5 Inch High Temperature KSV Voice Coil.
Check Stock

Electrodepot 60 Amp 4 Pole Normally Open Contactor 110-120V Coil Motor Load 40A Lighting 63A Bundle with Slotted Steel Zinc Plated DIN Rail 35 mm x 6 in – 1 Piece with 2#10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head....
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • ...tra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
  • 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-....
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and t....
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....
Check Stock

DGT Cast Iron Tattoo Machine Liner Shader

  • Armature bar : Pure iron has excellent magnetic conductivity.
  • Balanced, high-strength, low-vibration frame.
  • Lightweight, compact,excellent stability and feeling.
Check Stock

Forney 70421 Double Loop Chain, 3-by-100-Feet

  • 100 feet coil of zinc plated #3 double loop chain.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Forney 70420 Double Loop Chain, 2/0-by-175-Feet

  • 175 feet coil of zinc plated No.2/0 double loop chain.
Check Stock