Reviews Zigbee zwave Compatible

Arlo Pro SmartHub - Arlo Certified Accessory - Connects Arlo Cameras to the Internet, Works with Arlo Ultra, Ultra 2, Pro 3, Pro 4, Pro 3 Floodlight, Essential & Video Doorbell Cameras - VMB4540

  • The Arlo Ultra SmartHub securely connects Arlo, Arlo Pro, Arlo Pro 2 & Arlo Ultra wire-free cameras.
  • Connects to the Internet via your home router, while providing long-range connectivity and the best battery life for your cameras.
  • Features include WiFi (2.4GHz), ZWave, Zigbee, and ArloRF ready, local backup, Smart Siren and expanded coverage through additional base stations.
Check Stock

Z-wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown (DWZWAVE2.5-ECO)

  • COMPATIBILITY: The Ecolink Door/Window is manufacturer tested to be compatible with the following ZWAVE Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V1, V2, V3. Vera Plus, Vera Edge, Vera Lite. Homeseer. Dlink staples connect. While it may work with your ZWAVE hub, Ecolink cannot guarantee it..
  • SIMPLE TO INSTALL: Easy installation by simply pulling the battery Tab to begin the Learning process. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Features industry leading rare earth magnets that allow for up to a 5/8 inch sensor to magnet gap. Perfect for most door or window applications..
  • WHITE or BROWN housings INCLUDED: Both White or Brown plastic housing choice included to match any décor..
  • 3 YEARS BATTERY LIFE: Tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years..
  • Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing or home automation devices..
Check Stock

Zwave Door Sensor Aeotec Recessed Door Sensor 7, Z-Wave Plus Enabled Smart Door Sensor Battery Powered, SmartStart S2, Zwave Hub Required SmartThings Fibaro Home Centre 3 Hubitat

  • ... recessed sensor. Come with z wave security 2 (S2) framework which is the most advanced security for smart home zwave devices and controllers, z-wave gateway and zwave hub in the market today, it’s better to protect your family.
  • Anytime and anywhere, it’s great wireless door sensors for security. Smart hubs compatible with z-wave hub Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 908.40 MHz, 916.00 MHz.
  • Take your home under zwave controller. Open close sensor zwave Optimized to use up to 66% less battery power to communicate than previous generations. 3 year+ battery life powered by 1 x 1/2 AA battery. Battery included. Never worry about missing any important moment or running out of battery.
Check Stock

Aeotec Smart Switch 6, Zwave Switch Z-Wave Plus Plug 15A for Home Security Automation Z-Wave Power Monitor, Without USB Port

  • Automate your home lights and appliances with Z-Wave plug in outlet. Aeotec zwave outlet controls up to 15 amps and monitors real-time power consumption with a variable color LED ring and reports the data to the gateway system..
  • Z-Wave Hub Required. Aeotec Smart Switch 6 Z-Wave plug is compatible with most Z-Wave gateways including SmartThings, Vera, Webee, Wink-hub, Zipabox, Universal Devices ISY994Zw, openHAB, Open Z-Wave, Oomi, Jeedom, Indigo 7, HomeSeer, Home Assistant, Abode and more..
  • Z-Wave Smart Plug, Small Size. Beautifully designed and powerful performance. Smart Switch 6 ZWave smart outlet plug has powerful features packed in the tiny size of 2.20 x 2.20 x 1.96 (1.38) inches..
  • Z-Wave Plus certified smartplug for quicker response time, better wireless zwave range, and additional wireless security encryption. Z Wave certification number: ZC10-15080004..
  • Built-in features include surge protection for a safer home and signal repeater to improve the communication between the other ZWave devices..
Check Stock

Door Window Alarm, Mini Wireless Door Window Sensor Alarm for Z-wave 300 500 Series with Motion Sensor Door Sensor Remote Control (US)

  • COMPATIBILITY: The Ecolink Door/Window is manufacturer tested to be compatible with the following ZWAVE Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V1, V2, V3. Vera Plus, Vera Edge, Vera Lite. Homeseer. Dlink staples connect. While it may work with your ZWAVE hub, Ecolink cannot guarantee it..
  • SIMPLE TO INSTALL: Easy installation by simply pulling the battery Tab to begin the Learning process. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Features industry leading rare earth magnets that allow for up to a 5/8 inch sensor to magnet gap. Perfect for most door or window applications..
  • WHITE or BROWN housings INCLUDED: Both White or Brown plastic housing choice included to match any décor..
  • 3 YEARS BATTERY LIFE: Tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years..
  • Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing or home automation devices..
Check Stock

Optex TD-20U Indoor/Outdoor Wireless Infrared Transmitter

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Aeotec Range Extender 7, Zwave Extender and Repeater (One Pack)

  • WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
  • 50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
  • SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
  • SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
  • Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
Check Stock

Kovoq Smart Home Remote Stater Kit for Bedroom/Nursery Room, Smart Caregiver Pager, Control Smart Thermostat, Routines, Works with Homepod, Nest Audio, up to 330ft Range, 6 Customizable Big Buttons

  • 【WIFI & Zigbee Hub Gateway】Please make sure your smart devices is compatible with Tuya. This Tuya ZigBee smart wireless gateway works with 2.4G WIFI and ZigBee HA 3.0. It is integrated WIFI module and Zigbee module, so that the Tuya Zigbee sub-devices can be controlled remotely via WiFi on the APP or locally controlled via Zigbee network. Via Zigbee protocol, even if WiFi is not available at home, it will not affect local control of the sub-devices..
  • 【Group Control & APP Push】 Automated scenarios can be set through the APP. Add your Tuya Zigbee devices on Tuya APP (make sure the sub-devices support Tuya), and create smart group for automated smart scenarios applications. Through smart settings, the smart home hub gateway will automatically push notifications to the APP. This Zigbee WiFi Gateway Hub supports up to 30 sub-devices online at the same time..
  • 【Compatible with Tuya ZigBee Hub (Also Smartthings Supported)】- Considering the status of unstable network or no network, ZigBee 3.0 switch module is really an irreplaceable must to combine with ZigBee gateway to form a home LAN, NO MORE WORRY about no and weak network, easily get control via connected devices as long as there is stable ZigBee signal.
  • Allows for more devices connected via Zi....
Check Stock

LEDVANCE E21266 72923 Sylvania LIGHTIFY Motion and Temperature Sensor White

  • ZigBee Motion Sensor: A compatible ZigBee hub is required to control this sensor. Pair your light to a compatible ZigBee hub such as SmartThings....
  • Light Control: With a detection area of 15 feet and detection angle of 100 degrees, activate lights when motion is detected in a room or turn them off....
  • Temperature Sensor: Use the integrated temperature sensor to monitor the temperature in a room. Create an automation to adjust your smart thermostat....
  • Battery Operated: Can be mounted to walls or stand alone on a shelf. For indoor use only. Battery included (CR 2450)..
  • The OSRAM LIGHTIFY Gateway is not required when using a different compatible ZigBee hub. ZigBee LIGHTIFY smart sensors will not pair directly to voice....
Check Stock

Wink Connected Home Hub

  • ... it what to do when you’re asleep, awake, away, and back home..
  • Platform Compatibility: Control products from iOS, Apple Watch, Android, and Android Wear. Works with Amazon Alexa..
  • Supported Device Types: ZWAVE: Door Lock, Door/Window Sensor, Motion Sensor, Tilt Sensor, Light Switch, Light Dimmer, Appliance Module, ZIGBEE: Light Bulb, Light Switch, Outlet, Door/Window..
  • The Wink Shortcuts channel on IFTTT enables you to activate Wink Shortcuts through IFTTT triggers..
  • Beautifully designed mobile app that keeps you connected to your home no matter where you are. Supports WiFi, Bluetooth LE, Z-Wave, ZigBee, Lutron ClearConnect, Kidde. Can share devices while maintaining control of your own Wink account. Has ability to have multiple Wink Hubs connected to your Wink account. Kindly refer to the user manual and instruction video for reference..
  • A monthly subscription fee of $4.99 is required (effective May 20, 2020)..
  • All of your favorite smart products seamlessly connected in one simple app The Wink Hub will not automatically reconnect, since you've changed the credentials that the Hub currently knows. In order to update those credentials, power cycle your Wink Hub by unplugging it and plugging back in. Wait for it start flashing purple (may take s....
Check Stock