Reviews Z wave Enabled Outlets

Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more..
  • Z-Wave Plus certified. Certification number: ZC10-16095239.
Check Stock

Zooz Z-Wave Plus S2 Double Plug ZEN25, 2 Outlets, 1 USB Port

  • 2 SMART OUTLETS: Control 2 outlets individually or at once from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Z-Wave alarm panels like ADT, Ring, or Alarm.com. Custom handler required for SmartThings, contact seller for details..
  • POWER MONITOR: Track energy of connected devices for smarter power management. Schedule automatic shut-off times and restore status after power failure. NO ENERGY MONITORING OR ADVANCED SETTINGS ON WINK!.
  • USB PORT: Charge your tablet or headphones and get on/off (charging/charged) reports to your email or phone (NO Z-Wave control, reports only, turn off the device while charging for best results)..
  • SIMPLE SET-UP: Just plug it in to a standard receptacle. The extra compact design allows you to fit 2 Double Plugs in the same receptacle! Go to Zooz support website for step-by-step instructions how to add and use the Double Plug with your Z-Wave hub..
  • CERTIFIED: This device features overload protection and has been confirmed by ETL labs to comply with North American safety standards. It's equipped with the latest S2 smart security (your hub needs to support S2 too) and Z-Wave Plus 500 chip to offer longer range and faster communication speed..
Check Stock

Optex TD-20U Indoor/Outdoor Wireless Infrared Transmitter

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

SCHLAGE FE599NX Camelot by Accent Keypad Entry with Z-Wave with 16086 Latch 10027 Strike Lifetime Brass Finish

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
  • Receive text or email alert when your family uses their codes, so you know who's home.
  • Grant access to your home when you can't be there with a scheduled code to let someone.
  • Add, delete or change user codes remotely.
  • Run the most important systems in your home-thermostats, locks, lights and cameras from anywhere with Nexia Home Intelligence.
  • This Z-Wave enabled product communicates wirelessly to other Z-Wave products in your home.
  • remote management with a Nexia Home Intelligence system.
  • This Z-Wave enabled product allows for wireless communication to other Z-Wave products in your home.
  • Door range: 1-3/8 to 1-3/4 (35mm-44mm) standard.
Check Stock

GE Enbrighten Z-Wave Plus Smart Plug with 2 USB Ports (3.4A Shared), 2 Individually Controlled Outlets, On/Off Switch, Zwave Hub Required, Works with SmartThings Wink & Alexa, 28177, White

  • ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway to operate – Wink and Vivint supports independently controlled outlets – The following will add and control outlets together only: SmartThings, ADT Pulse, Trane, Nexia, Honeywell, HomeSeer, and Vera. Works with Alexa for voice control (hub Required, Alexa device and hub sold separately)..
  • INDEPENDENTLY CONTROLLED OUTLETS REQUIRE HUBS TO FULLY SUPPORT Z-WAVE MULTI-CHANNEL (Wink & Vivint Only) – IF HUB DOES NOT SUPPORT THIS FEATURE BOTH OUTLETS CAN ONLY BE CONTROLLED TOGETHER.
  • Wirelessly schedule and control two lamps or small appliances separately or together from anywhere, at any time with any mobile device – space-saving design does not block second outlet or obstruct furniture placement..
  • Smart Switch contains two (2) Z-Wave controlled grounded outlets allowing control of two devices at the same time or independent of each other and two (2) always on USB ports (3.4A Shared) for up to 40% faster charging – one outlet and one USB port on each side..
Check Stock

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Aeotec Smart Switch 7, Z-Wave Plus S2 Wireless Control Socket Zwave Plug for Home Automation, 15A, Gen7, White

  • Aeotecs smallest, best-certified smart plug built with Gen7, Z-Wave Plus, S2, and SmartStart. 30% smaller than past smart switches at only 2.4x1.5x1.2 inch - so small that it doesnt block other power outlets!.
  • 99% accurate energy metering inbuilt. Analyses how much electricity youre spending in real-time and reports it back to Z-Wave gateway software..
  • Z-Wave Plus, 700 series, and Z-Wave S2 certified for 30% quicker response time, 150% better wireless range, and 3-layers wireless security encryption. Z-Wave certification number: ZC12-20050064..
  • Inbuilt surge protector: protects your electronics from surges / spikes that are up to 2,000 volts. Inbuilt over-current protection up to 16 amps..
  • Compatible with certified Z-Wave gateways. Tested to work with Aetoec AutoPilot, Aeotec Smart Home Hub, Samsung SmartThings, Hubitat, Vera, ISY994i ZW and more..
Check Stock

Aeotec Z-Stick Gen5 Plus Z-Wave Plus USB to Create Your Own Z-Wave Hub SmartStart and S2 Enabled Works with Raspberry Pi 4 Compatible with SmartThings HomeSeer and Others

  • Works with Raspberry Pi, Windows, Mac, Linux to create a z wave hub for control of Z-Wave and Z-Wave Plus devices.
  • Easier device setup than standard Z-Stick Gen5. Now supports SmartStart device installation when used with compatible software connect Z-Wave devices....
  • More secure than standard Z-Stick Gen5. Upgraded to offer Z-Wave Security 2 (S2) encryption, this Plus edition of Z-Stick is enhanced with AES 128-bit....
  • Faster than standard Z-Stick Gen5. Plus edition offers a 50% speed performance when communicating securely vs. non Plus edition. And can be used to....
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.....
Check Stock

Minoston Z-Wave Plus Outlet, Mini Plug in Socket, 15A, Z-Wave Hub Required, Built-in Repeater/Range Extender, Work with SmartThings, Wink, Alexa, Google Assistant, FCC & ETL Listed(MP21Z)

  • ...nt protection, when the loading is over 10A, the device wil turn off!.
  • Timer and schedule: Control lights and applications to come on or turn off via a schedule at certain time of the day to meet your needs and reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Mini Z-Wave Outlets: Mini size design makes it portable and you can make the most of your wall outlets. Control your home applications with 15A, 125 VAC grounding receptacle for use with a wide variety of lamps and appliances..
  • This Z-Wave outlet smart plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUSZ-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Easy to Setup No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

GE 45603 Z-Wave Technology Wireless Lighting Control Fluorescent Light & Appliance Module

  • The switch enables you to wirelessly control to turn lights on and off, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day..
  • Features one always-on pass-through AC outlet and one Z-Wave enabled outlet..
  • Space-efficient, side-plug design does not block lower outlet or obstruct placement of furniture..
  • Easily control lighting with your mobile device or computer using any Z-Wave certified gateway, or control lighting on location with the manual push-button control or a Z-Wave certified remote..
  • Compatible with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Alexa, Nexia, Honeywell, HomeSeer, Smart Security, Harmony, Vera, Connect, Iris. Works with Amazon Alexa and Google Home..
Check Stock