Reviews Woofer Box - BestBuyersPro.com

Seismic Audio - OutRage122 - Dual 12 Inch 2400 Watt Car Audio Subwoofer Box Enclosure with Rear Vent

Model: OutRage122 | Dual 12 Inch 2400 Watt Car Audio Subwoofer Box.
Rear Vented Design for Maximum Bass Output | Power Rating: 2 x 1200 Watts Max Power | 2400 Watts Total.
High Powered 12 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish.
Voice Coil: 2.5 inch 4 Layer Dual Voice Coil each woofer | Impedance: 2 Ohms | Magnet: 2 x 50 Ounce each woofer.
Sensitivity: 91 dB | Frequency Response: 25-150Hz | Binding Post Connectors | Dimensions: 32.3" x 15" x 13.8" | Weight: 50.7 lbs.

Traditional passive loudspeakers - passive old school speaker design, Simply drive power from your amplifier or receiver. Full range sound coverage with 2-way tweeter and woofer configuration and internal crossover wiring system.
High quality - deluxe 8" Woofer with polymer Treated Cone, 2. 5" X 5. 5" Wide dispersion horn tweeter, banana Plug and raw speaker wire inputs.
Portable and durable - high quality CARB compliant MDF wood cabinet with grey aviation grade Carpet, metal mesh grill and protective corners. (H x W x D) 16" X 10" X 9. 25", 45hz-30 kHz with 87dB at 8ohm.
System requirements - any amp or receiver with raw speaker wire or 1/4 inch jack outputs, power from your amp should be no less than 10 and no more than 300 watts per Channel, cables to connect your amp to the speakers. Use for DJ, PA, Karaoke and live stage.
What's in the box - 2 Goldwood DPI-800C/8 passive speakers, instruction manual.

HOME THEATER LFE POWERED SUBWOOFER - Dedicated LFE or standard RCA inputs easily connect to your home theater receivers Subwoofer Output. Save power....
250 WATTS PEAK POWER - Integrated high efficiency power amplifier, 30 - 250 Hz with 96dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control....
6.5 INCH FRONT FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet with vibration....
SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with RCA dedicated or LFE subwoofer outputs, home receiver or....
WHAT'S IN THE BOX - Acoustic Audio by PSW250-6 powered subwoofer, 9 foot dual RCA/LFE cable, RCA "Y" adapter, instruction manual - Standing sub with....

The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in....
The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
The flat woofer utilizes a super linear spider for maximum control over the woofer's linear motion to improve overall sound quality..
The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the....

The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in the tightest of spaces such as behind or under the seat of a pickup truck..
The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the woofer cool..
The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier’s speaker wiring. The spring terminals will accept up to 10 AWG speaker wire..

The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in the tightest of spaces such as behind or under the seat of a pickup truck..
The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the woofer cool..
The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier's speaker wiring. The spring terminals will accept up to 10 AWG speaker wire..

HOME THEATER POWERED SUBWOOFER - Standard RCA inputs easily connect to your home theater receivers dedicated Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature.
250 WATTS PEAK POWER - Integrated high efficiency power amplifier, 30 - 250 Hz with 96dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 50 - 150 Hz Crossover control knobs.
6.5 INCH DOWN FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish.
SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with dual or single RCA dedicated Subwoofer passive output, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems.
WHAT'S IN THE BOX - Acoustic Audio by PSW-6 powered subwoofer, 6 foot dual RCA cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 11.1" × 9.25" × 10.04" - NOT LFE Compatible.

The Kenwood eXcelon flat subwoofer design is approximately 40% slimmer in height than a standard subwoofer. This makes them ideal for installation in....
The eXcelon flat woofer uses a carbon-glass fiber honeycomb cone which allows the woofer to be efficient and durable at the same time..
The Kenwood woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response..
The flat woofer utilizes a pair of silver-plated spring terminals on one side of the woofer for connection to your amplifier's speaker wiring. The....
The Kenwood woofer features an advanced Heat Transfer System designed specifically for its slim-design to provide proper ventilation to keep the....

Features: Power Handling: 300W Max | 100W RMS. Impedance: 4-Ohm, Frequency response: 40 ÷ 23kHz, Sensitivity: 93 dB, Woofer size: 6″ x 9″, Tweeter size: 1.58″, Supertweeter size: 0.8″, Woofer Voice Coil Ø: 1.2″, Tweeter voice coil Ø: 1.1″, Woofer magnet: High density flux ferrite, Tweeter magnet: Neodymium, Woofer cone: Semi Pressed Paper-Mica, Tweeter dome: PEI, and Supertweeter dome: PEI..