Reviews Wood Screw Head Diameter
ECKJ Hex Lag Bolts 112PCS M6 Hex Head Lag Screws Washers Assortment Kit Fully Thread Heavy Duty Hexagon Wood Screw Zinc Plated Black Metric Length Include 16/20/25/30/35/40/45/50/60mm
- 【112PCS of 9 Sizes】 Hex head diameter is 10mm, thread diameter is 6mm, 9 sizes of screw length are 16mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm. Flat washer outer diameter is 12mm..
- 【Quality Material】 Black lag screws are made of high quality carbon steel, high hardness and with beautiful appearance, zinc plated is smooth and anti-rust..
- 【Lag Screw with Washer】 these bolt screws feature deep wood screw coarse threads for superior holding. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
- 【Wide Application】These metal wood screws are great for exterior household and industrial applications such as pergolas, garden beds, mailboxes, deck building, joining lumber or any DIY projects..
- 【Note】 This item contains small and sharp parts, please keep it away from kids. We guarantee 100% satisfied after-sales service! If you had a problem, please let us know before leaving a review..
Check Stock#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere
- Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
- Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
- Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
- Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check StockStainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.
- Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
- ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
- REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
- HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
- MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check StockStainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.
- Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
- ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
- REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
- HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
- MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check StockStainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.
- Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
- ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
- REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
- it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
- HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
- MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock100PCS #10 x 1 3/8 to 2 Available Flat Head Sheet Metal Screws Phillips Drive Wood Screws 304 Stainless Steel 18-8 Self Tapping
- Material: High quality 304 (18-8) stainless steel, perfect strength and good corrosion resistance.
Check Stock100PCS #10 x 1/2 3/8 to 2 Available Flat Head Sheet Metal Screws Phillips Drive Wood Screws 304 Stainless Steel 18-8 Self Tapping
- Material: High quality 304 (18-8) stainless steel, perfect strength and good corrosion resistance.
Check Stock40 Pack Threaded Insert Nutsert, 1/4\-20 x 15mm Screw in Nut Threaded Wood Inserts, for Wood Furniture(with 1/4\ Allen Wrench)
- Size: Insert head diameter: 0.445" (11.3mm), body diameter: 0.315"(8mm), threads diameter: 0.410"(10.4mm),1/4-20 threaded insert length: 0.591"(15mm).
- Material: High quality carbon steel with high hardness, can keep a long-lasting hold..
- Application: These furniture screws are suitable for wood furniture, hardwood or solid wood, such as furniture combinations(Threaded inserts are used to drill the right size hole and Install with hex key provided, and screw in nut connector screws)..
- Recommended drill bit for wood: For Soft Wood-- 3/8" (8.5mm/9mm)dirll bit in soft wood, the threads cut will easily go into the wood.
- For Hard Wood-- 3/8" (10mm),pls drill a hole that close to the outside threads diameter.If the hole is too small, Screwing it may split the wood or insert. If you are not sure the harness of the wood material, pls drill a proper sized hole for test before installing it..
- Package included: 40 *1/4-20 Threaded Insert Nutsert + 1*1/4"(6mm) Allen Wrench..
Check Stock576 Pcs Screw Cap Stickers and 120 Pcs Screw Cap Screw Covers Self Adhesive PVC Screw Hole Stickers Plastic Screw Cap Covers for Wood Screws Furniture Cabinet, Mixed Color
- Abundant Quantity: there are 6 sheets of self adhesive screw hole stickers measuring about 15 mm/ 0.6 inch in different colors, including white, black, wood textured color, reddish brown, brown and grey, 576 pieces in total.
- And 120 colorful screw head caps, approx. 12 mm/ 0.5 inch in diameter, suitable for 4 mm/ 0.16 inch self tapping screw heads.
- Sufficient quantity to meet your daily uses and replacements.
- Sturdy and Reliable: these wood stickers are made of quality PVC plastic materials, which are safe and flexible, sturdy enough that the furniture stickers won't deform easily, which can serve you for long term use.
- Practical and Beautiful: these wood screw covers can stick firmly to most surfaces and won't fall off easily, and the screw cap can provide protection for your screws and avoid rusting.
- Multiple colors are available to meet your various needs to make your furniture and walls look better after installation.
- Easy to Use: with the self adhesive design, these wood hole covers are easy to use, you can simply peel them off and paste on the holes that need to be covered.
- As for the screw cap covers, you can easily install them in place with a screw tool, saving your time and effort.
- Multiple Uses: these screw cover stickers and screw hole caps c....
Check Stock#14 x 3/4' Hex Washer Head Self Drilling Screws, Self Tapping Sheet Metal Tek Screws, 410 Stainless Steel, Black Oxide Finish, 50 PCS
- Type: #14 x 3/4", 410 Stainless Steel, Black Oxide..
- Screw Length: 3/4"(excluding the head height).
- The drilling tek screws are 100% 410 stainless steel which is one of the highest forms of corrosion resistant steel..
- Ideal use for wood, metal or other tough materials and known for their effecient application performance and endurance..
Check Stock