Reviews Wlan Module With Bluetooth

IPEX MHF4 Antenna 2.4GHz 5GHz 3dBi Internal Laptop WiFi Antenna for M.2 NGFF Module 7265 8265 9260 9560 AX200 Wireless WLAN Card

  • Frequency: 2.4GHz / 5GHz || Small PCB Size: Length 1.26in, Width 0.55in.
  • Gain 3dBi internal Antenna for Laptop, WiFi Wireless WLAN, Bluetooth, etc..
  • Use for M.2(NGFF) WiFi WLAN Cards(Cannot be used for Mini PCIe Slot.).
  • Compatible WiFi/Bluetooth module with M.2 interface: 7260 7265 3160 3165 8260 8265 17265 18265 9260 9560 ax200 ax201 ME906E ME906V ME906J ME906C ME936....
Check Stock

2 x 8dBi 2.4GHz 5.8GHz Dual Band WiFi Antenna IPEX MHF4 Internal Antenna with 50cm Cable for M.2 7265 8265 9260 9560 AX200 Wireless WLAN Card

  • Frequency: 2400-2500MHz(2.4GHz), 4900-5900MHz(5.8GHz) || Big PCB Size: Length 3.74in, Width 0.54in.
  • High Gain 8dBi Omni-Directional Internal Antenna for Router, WiFi Wireless WLAN, PC, Laptop, Bluetooth, Drone, etc..
  • Use for M.2(NGFF) WiFi WLAN Cards(Cannot be used for Mini PCIe interface.).
  • Compatible WiFi/Bluetooth Module with M.2 interface: 7260 7265 3160 3165 8260 8265 17265 18265 9260 9560 ax200 ax201 ME906E ME906V ME906J ME906C NGFF....
Check Stock

ACEIRMC D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino (3pcs)

  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications..
  • MH-ET LIVE D1 mini ESP32 ESP-32 WiFi+Bluetooth Interne.
  • 100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios..
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO..
  • D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible with Arduino.
Check Stock

DSD TECH HM-18 CC2640R2F Bluetooth 5.0 BLE Module Compatible with HM-10 for Arduino

  • Original HM-18 module: DSD TECH brand guarantees and we accept refund without any excuse..
  • Bluetooth 5.0 BLE Module: The chipset is CC2640R2F from TI,Compared to the Bluetooth 4.0 module, this BLE module has a faster transfer rate and a larger MTU..
  • Compatible with HM-10, if you are using HM-10 now, you can quickly upgrade your board to Bluetooth 5.0 BLE..
  • Free APP: DSD TECH offers a free app that you can get this module into work in 5 minutes. Please search "DSD TECH Bluetooth" in Google Play App store..
  • DSD TECH back this HM-18 Bluetooth 5.0 BLE module with ONE Year WARRANTY and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours.
Check Stock

DSD TECH HM-19 Bluetooth 5.0 BLE Module with CC2640R2F Chip Compatible with iOS Devices

  • Original HM-19 module, DSD TECH brand guarantees and we accept refund without any excuse..
  • Bluetooth 5.0 BLE Module: The main IC is CC2640R2F from TI,Compared to the Bluetooth 4.0 module, this module has a faster transfer rate and a larger MTU..
  • Fully compatible with HM-11,HM-17, if you are using HM-11 or HM-17 now, you can quickly upgrade your board to Bluetooth 5.0 BLE..
  • DSD TECH offers a free app that lets you quickly integrate this module into your project.Please search "DSD TECH Bluetooth" in Google Play and the Appstore..
  • DSD TECH back this HM-19 Bluetooth 5.0 BLE module with ONE Year WARRANTY and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours.
Check Stock

HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

HiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

Dell Wireless WiGig Tri Band Dock Replicator for Select Latitude Models with WiGig Module/Antenna (WLD15 452-BBUX CTKM5)

  • NOTE: The WLD15 Wireless Dock will not connect to systems equipped with the previous generation Dell Wireless 1601 WiGig WLAN device..
  • Power up to two external displays, keyboards, mouse, audio and other peripherals. Supports VGA, HDMI, and mDP for up to two displays Contains five USB ports (two in front, three in back) with data transfer rate up to 4.6Ghz.
  • COMPATIBLE w/ ultrabooks + 2in1's w/ 5th gen. Intel Core vPro enabled with Intel TriBand(17265 802.11ad WLAN module) + equipped with an Intel WiGig antenna. E.g. Latitude E7250/7250, E7450, E5250/5250, E5450/5450, E5550/5550 + 13 2in1 (7350).
  • As of Mar 2018, Wireless Dock (WLD15) compatible systems include: Latitude 12 5280, 5285, 5289, 5270, 7280 Latitude 13 7370, 7380, 7389, Latitude 14 5470, 5480, 5488, 7470, 7480 Latitude 15 3510, 5250, 5450, 5570, 5580, 7250.
  • More detailled information can be found at the Dell help pages sln298953 and sln297279.
Check Stock

HiVi-Swans M500 Active 3-Way Bookshelf Speakers - Professional Studio Monitor Speakers - 180W RMS 8.0 Inch Long-Throw Woofer, Bluetooth 5.0 apt-X HD/WiFi/WLAN/Coaxial/Optical/XLR/Line

  • Multiple connectivities - Bluetooth 5.0 apt-X HD/WiFI/WLAN/Coaxial/Optical/XLR/Line, meet your needs of modern life uses..
  • Premium Drivers - 180W RMS 8” long-throw woofer can get down to 35Hz.
  • 35W RMS isodynamic ribbon tweeter can get up to 40kHz..
  • Classic Design - Black matte cabinets with luxurious intensified wood grain side panels which reduces diffractions. 4° slope front panel guarantees listeners can hear sound from accurate axial direction..
  • High-End Materials - Composite polypropylene diaphram, natural rubber edge, double shading coil, Kapton material, and mini DSP chip high-power digital amplifier module - all these can reduce nonlinear distortion and produce powerful bass..
  • Treble/Bass Adjustment - 3 Knobs on the back allow users to adjust the treble/bass ±3 or volume.
Check Stock