Reviews With Ring Nut

LPHUMEX Fuel Pump Removal Tool - Fuel Pump Lock Ring Tool, Fuel Tank Repair Kit, Fuel Tank Lid Cover Remove Spanner, 3/8' to 1/2' Adjustable Lock Ring Spanner

  • Universal: This Fuel Pump Module Spanner Wrench fits most plastic retaining rings, Compatible with all vehicles that have silent fuel tank lid, adjustable from 3/8" to 1/2" (38mm to 168mm) ratchet drives..
  • Applications: Suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank..
  • Easy Handle: Anyone who needs to remove a ring nut to change out or install a fuel pump, replace fuel sending unit, change the fuel filter etc. MUST have this wrench!! Gets the job done quickly!! Zero damage to the plastic ring nut with this wrench and it's totally adjustable to fit whatever size ring nut possible!!.
  • Work with: All that is needed is a 12mm wrench to set the width of the arms and a 3/8" drive ratchet with extension. Perfect though. Way better then a screw driver and hammer (that didn't work).Make sure you tighten the two small bolts before use. The wrench easily engages in the ridges around a threaded locking collar that secures the fuel pump to the top of the tank..
  • You can use on all kind of vehicle with slient fuel tank lid..
Check Stock

Head Bobbin Fists Up 13 Metal Drum Loop

  • constructed of first quality cold rolled steel with rust inhibitor interior..
  • supplied with bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

Head Bobbin Fists Up 03 Metal Drum Loop

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

Head Bobbin Fists Up 01 Metal Drum Loop

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

Lependor M8 Metric Ring Shape Lifting Eye Nut 304 Stainless Steel Lifting Eye Threaded Nut Fastener - 10 Pcs M8 (5/16\）

  • Package Content: 10pcs x M8 Ring lifting Nuts.
  • Ring inner diameter approx.20mm/0.78inch.
  • Ring Thickness:7mm/0.3" , M8 Metric Ring Shape Lifting Eye Nut is a standard metric standard coarse pitch with a pitch of 1.25mm..
  • The standard used by our Ring Shape Lifting Eye Nut is the Metric Units standard. Its specification is M8, The screw that needs to be matched also needs to be in metric units. M8 is basically equal to 5/16 inch, but it may not compatible with a standard 5/16 thread bolt. The thread are always the coarse thread..
  • Material:Made of durable 304 stainless steel,durable,Corrosion resistant and antirust.It is of good bearing capacity. Working Load Limit (WLL): 300 Lbs..
  • Precision thread and high polished surface.Easy To Install:Easy to use, ideal lifting equipments..
  • Widely used in a variety of engineering lifting machinery, metallurgical and mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc..
Check Stock

Victor 0381-1932 CA 2462+ Cutting Attachment, 180° Head

  • Improved head durability, preheat control valve flow and reduced user fatigue due to improved balance.
  • Improved access and reparability of mixer with single nut removal.
  • Superior cutting oxygen valve with improved feathering/ease-on control.
  • No wrench flats on connection nut indicates hand tightening only for safer operation.
  • Internal connection snap ring prevents coupling nut sliding and exposure to o-rings for reduced damage.
Check Stock

Victor 0381-1928 CA 2460+ Cutting Attachment, 90° Head

  • Improved head durability, preheat control valve flow and reduced user fatigue due to improved balance.
  • Improved access and reparability of mixer with single nut removal.
  • Superior cutting oxygen valve with improved feathering/ease-on control.
  • No wrench flats on connection nut indicates hand tightening only for safer operation.
  • Internal connection snap ring prevents coupling nut sliding and exposure to o-rings for reduced damage.
Check Stock

Milwaukee FUEL 2854-20 3/8 Brushless Cordless Impact Wrench Volt (Bare Tool Only)

  • Our M18 FUEL 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility..
Check Stock

Drummer Octopus T-Shirt - Funny Drumming Drums Metal Shirt T-Shirt

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock

55 Gal Steel Drum Open-Head| Black | Metal Barrel | Non-Lined Interior | Bolt Ring Closure

  • constructed of first quality cold rolled steel Non-Lined Interior.
  • supplied with 12 gauge bolt type locking ring closure, bolt, nut and gasket cover..
  • designed, manufactured, and certified to meet UN requirements for hazardous materials under DOT 49 CFR. The UN Ratings are 1A2/Y1.8/200 & 1A2/X400/S..
  • Steel drums are environmentally friendly since they can be recycled, reconditioned and re-purposed..
  • 12-gauge bolt ring closure, sponge rubber gasket and plated bolt/nut provide a tight seal to help prevent leaks and spillsInterior is coated with a corrosion inhibitor.
Check Stock