Reviews Wire Processing Machine

Slendor Manual Wire Stripping Machine, Drill Powered Wire Stripper Machine for 0.06-0.98 Inches Scrap Copper Wire Cable Stripping, Portable Copper Wire Peeler Machine with Hand Crank

  • ...kly strip wires at a speed of 50 ft/min, greatly improving your work efficiency..
  • ✅ Wide application: This manual wire stripping can be easily installed on the workbench, small and portable, convenient to use anytime, anywhere from home to shed, workshop to construction site. It is widely used in wire harness processing, aviation wire processing, audio and data wire processing, waste copper wire recycling and dismantling and other industries..
Check Stock

Automatic Wire Stripper Machine Wire Diameter 0.04-0.79inch Wire Stripping Machine Adjustable Power 40W Portable cable stripper for Scrap Copper Wire Cable Recycling

  • 【40W MOTOR】- Our wire stripping machine has a 40W strong motor, 110V 60HZ, silver. A compact and long lasting frame of aluminum alloy, lightweight....
  • 【LARGE CAPACITY】- Our wire stripping tool has two different sized feeding holes, allowing wires in diameter 0.04"-0.79" (1mm~20mm), 2 mounting....
  • 【ADJUSTABLE POWER】- Speed can be changed by adjusting output voltage, Controller Output: DC 3~12V 5A, Controller Input: 110V 50-60Hz..
  • 【HANDLE&DRILL DRIVEN】- The cable stripper can be driven by starting an electric drill to power it for a convenient and fast working. Soft start....
  • 【VARIOUS USES】- The electrical wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line....
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

ETOSHA MIG Welder 160A Portable Welding Machine, Flux Core Wire Gasless Automatic Wire Feeding Welders, 110V AC Wire Feed Welder with Welding Gun, Grounding Clamp, Input Power Adapter Cable and Brush

  • Gasless flux-cored wire welder: This wire feed welder uses a convenient flux core wire that releases metal inert gas while welding to prevent oxidation of the welded parts. No need to carry heavy cylinders!.
  • Powerful: This MIG welder uses 0.030"or 0.035" flux cored wire. The dedicated 110 AC, 60hz power input and 160A output allows you to weld mild steel up to 1/4"plate..
  • Safety Protection: Overheat protection, insulation protection, the machine will stop automatically when overheated. can be widely used in car&farm maintenance, metal processing, high-quality welding and thin material precision welding. It is the best choice for home repairs!.
  • Easy to use: This welder features an automatic adjustment function, 10 wire feed speed and 4 current output.
  • lightweight 39.68lbs, portable and compact design, with a comfortable hand grip that makes it easy to carry wherever you want..
  • Package Includes: MIG-160 Welder machine.
Check Stock

TILAX 3 Inch Wire Cup Brush End Brush Set 3 Piece, Wire Brush for Drill 1/4 Inch Hex Shank Arbor 0.012\ Brass Coated Crimped and 0.019\ Carbon Steel Knotted Wire Brush, for Drill Attachment

  • DRILL WIRE BRUSH SET DESIGNED FOR MULTIPLE SCENES - 3 in (75mm) twisted wire cup brush can complete large area heavy processing.
  • 3 in (75mm) brass coated crimped steel wire cup brush is suitable for large area light load finishing.
  • 1 in (25mm) knotted end brush can perform heavy-duty processing in hard-to-reach areas..
  • SECURITY AND STABILITY - The external and internal fixing plates of the cup wire brush for drill are made of thickened steel, and the weight ratio is also accurately calculated to ensure stability and safety, while greatly improving processing efficiency..
  • THE BEST WIRE BRUSH FOR DRILLING - Considering that the 3 in cup brush needs to be used in large area processing, we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
  • AVOID BREAKS AND DEFORMATIONS - The metal wire of the drill brush uses 0.012 "brass coated crimped wire and 0.019" 72A carbon steel wire, excellent performance can easily remove rust, paint, dust and burrs from surfaces such as metals and wood, and can also be used to level weld spatter..
  • MAXIMUM POWER DRILL BIT -The strong 1/4 inch hex shank quick-change shank can be used for all types of drill bi....
Check Stock

BestEquip SWT508-E Computer Wire Cutting Stripping Peeling Machine 0.1-8 mm² Automatic Wire Cutter Stripper 1-9999 mm Cutting Length Wire Stripping Machine

  • ... performance, fast speed, and high accuracy..
  • Strong Big Fan: Environmental protection and energy saving, low noise, low energy consumption. The powerful big cooling fan can fast dissipate heat. Widely used in the electronics, electrical appliances, motor, lamps and lanterns, toys, and other various products of wire processing..
Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

110V 800w vfd Spindle Package：110V 1.5KW VFD+110V 800w Φ65mm ER11 Water Cooled Spindle Motor+110V Water Pump+65mm Clamp +5m Water Pipe

  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）.
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product.
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe..
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
  • 【Warranty】1 Year replace(The spindle is half a year). Spindle Warranty :Half a year If there is an alarm in the product and you do not know how to operate, please contact the seller.
Check Stock

RS-550s 18v (12v - 20 volts) DC Motor Round Shaft - High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine

  • 【PACKAGE INCLUDE】-1pcs 110V/1.5KW Square Spindle Motor(4.3kg,9.5lbs） +1pcs 110V/1.5KW VFD Inverter +13pcs Collets ER11(1mm-7mm) + 20pcs Drill Bits+ 1meter aviation wire +2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm beyond expectation..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.It includes wire and 2 wrenches to connect spindle motor with VFD.It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/Plastic/Aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

KUOFU 2 Pack 3 inch Nylon Filament Abrasive Wire Brush Cup Polishing Wheel with 1/4\ Hex Shank Surface Cleaning Rust Removal Deburring Bule/Red 120# 240#

  • The brush thread of the bowl-shaped abrasive wire brush is made of high-density alumina sand wire and 20-40% abrasive material. The bowl body is exquisitely designed, the thread is firm and firm, not easy to loosen, durable and wear-resistant..
  • The design of the bowl-shaped abrasive wire brush is most suitable for processing vertical surfaces, log walls, bonded beams, circles and flat surfaces.
  • it is suitable for removing burrs after processing jewelry, other metals, and mechanical parts.It can be installed on grinders, angle grinders, and pneumatic tools..
  • Abrasive wire brushes will not rust, shed hair, durable, and will not pierce the skin under normal conditions.
  • it has a long service life, shortens polishing time, and greatly improves equipment efficiency..
  • 2PC abrasive wire polishing wheel with rod.
  • If you encounter any problems, please feel free to contact us, we will reply you within 18 hours. In addition, if you are not satisfied with these items, you can return them or change them for free within 3 days..
Check Stock