Reviews Wire Mesh Cable Way

Woodhead 35970 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 5.00\ Mesh Length, .25–.36\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 5 in. in mesh length and works with 0.36 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35974 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 10.00\ Mesh Length, .75–.99\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.99 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35972 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 8.00\ Mesh Length, .50–.61\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 7 in. in mesh length and works with 0.61 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35975 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 12.00\ Mesh Length, 1.00–1.24\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

4 Rockville WB65KLED 6.5\ 600w Metal Marine Wakeboard LED Tower Speakers+Amp+Mic

  • ... Includes: (2) Pair Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles. (1) Rockville ATOM S20 Marine Bluetooth Amplifier 1600w 4 Channel/Volt Meter+PA Mic. (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin.
  • Features of RKL65MBW: Pair Rockville RKL65MBW 6.5” 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LED’s flash to the rhythm of the music. You can select either red or blue color LED’s on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire..
  • Features of ATOM S20: Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, RF faostgte etc). 2 Ohm: 110 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm: 70 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 220 Watts x 2 Channel 003c1% THD+N @ 14.4 Volts..
Check Stock

Woodhead 35905 Pulling Grip, Light Duty, Flexible Eye, 5800lb Approximate Break Strength, 17.00\ Mesh Length, 1.25–1.49\ Cable Diameter

  • Flexible Cable Grip: this wire mesh pulling grip features a flexible eye design, which enables it to work perfectly in generous and tight spaces.
  • Shoulder Protectors: the cord grip features shoulder protectors across the center of the grip within a raceway to ensure a bump less pull and long-life operation.
  • Superior Strength: manufactured using galvanized steel, the wire supporting grip is resistant to rust and corrosion and thus offers extended durability. This electric mesh grip is designed for applications requiring additional strength.
  • Easy Installation the smooth and thin profile of wire mesh grip makes it easy-to-use, quick-to-install and reusable.
  • Specifications: the light duty pulling grip has a cable diameter of 1.49 in. and maintains a pull capacity of 5800 lb. This single weave wire mesh grip has a mesh length of 1.41 in..
Check Stock

Woodhead 36575 Support Grip, Service Drop, Single Eye, 500lb Approximate Break Strength, 5.00\ Mesh Length, 5.00\ Bale Length, .30–.43\ Cable Diameter

  • Service Drop Grip: this single weave mesh grip attaches to any fixed structure with ease. Single weave mesh design offers maximum strength, eliminating the need of an additional hardware.
  • Mesh Material: service drop cable strain relief grip is made using Tinned-Bronze wire mesh that offers corrosion resistance. This pulling grip finds application in light-duty cable placement.
  • Durability: the tinned-bronze support grip has top-mounted eye protector and closed mesh design that boosts durability, stability, and gripping strength.
  • Application: wire support grip is used for the service entrance cables, and for the repositioning of any fixed or moving structures.
  • Specifications: single eye cable support with 5.00 in. bale length has a mesh length of 5.00 in. and an approximate break strength of 500 lb. It has a cable diameter is 0.30–0.43 in..
Check Stock

Woodhead 35931 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 3400lb Approximate Break Strength, 14.00\ Mesh Length, .50–.74\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 14 in. mesh, double weave and split lace design with 0.50-0.74 in. cable diameter. It has a break strength of approximately 3400 lb..
Check Stock

Woodhead 35935 Pulling Grip, Medium Duty, Flexible Eye, Short Length, 8100lb Approximate Break Strength, 26.00\ Mesh Length, 1.50–1.99\ Cable Diameter

  • Electrical Cable Support: pulling grip is a flexible holding device that helps to pull or remove electrical wirings, synthetic ropes, optical fibers, etc. This wire grip helps to dissipate the cable tension over a large area, protecting the cables from damage.
  • Flexible Mesh Grip: the offset eye design of this cord grip allows an easy attachment to the pulling line. This mesh support grip is flexible enough to work well in both large and confined spaces.
  • Applications: this cable support grip can easily fit single or a bundle of cables and is used for pulling cable in different overhead or underground applications, stringing service, pulling wire through conduit, and for underground electrical pulls.
  • Durability: mesh grip is made with high-quality galvanized steel that provides maximum strength to the cable connections along with resistant to corrosion. This adds to the durability of flexible cable grip.
  • Specifications: short length cable support grip features 26 in. mesh, double weave and split lace design with 1.50-1.99 in. cable diameter. It has a break strength of approximately 8100 lb..
Check Stock