Reviews Wire For 12v Led Light

Partsam Pair 3.9" Side Marker & Clearance Light Red Waterproof Black Base Mount 3LED, Sealed Thin Line LED Trailer Marker Clearance or ID Lights w/Miro-Reflectors

  • Package includes 2pcs Red 3LED 12V Truck Trailer Clearance Lamp Side Marker Light.
  • including stainless screws for installation in package.
  • NOTE: The covers are removable. Please snap off the lens and install the base with screws, then snap it on, very secure.
  • Waterproof Lens,sealed Light Led marker trailer.
  • dimensions without base: 98 x 31 x 26(mm).
  • Universal for Pickups,Truck Trailers,SUV van Caravan and Boat Lorry Bus.
  • Replace rear clearance lights on RV or replace boat trailer clearance lights.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • HARDWIRED WITH 2 WIRES(NO SWITCH): red wire is the lead and black the ground.
  • draw exactly 40 milliamps of current at full brightness.
  • Led Marker light,Auto side Lamps,clearance light,identification light,Trailer Light etc. Easy installation: waterproof, well sealed.
Check Stock

RVZONE 12V LED Interior Light Bar | 120LEDs 1800LM 8W DC 12 Volt led Strip Lights with ON/Off Switch for Camper Truck Van RV Trailer Boat Car Cargo Cabient Lights Fixture Motorhome (4Pack)

  • 【Super Bright】- This 12v LED light strip uses 3 rows of 120 high quality LEDs, 6500K/1800Lm light output. This enclosed trailer lights have undergone strict quality control to ensure the lifespan of the LED beads is over 50,000 hours..
  • 【Wide Application】This 12V LED light fixture can be used as emergency light, camping lights, vehicle repair lights, car interior lights, RV van work lights, cabinet lights, display light, cargo trailer enclosed trailer, etc. Suitable for home, office, cabinet, commercial space, etc..
  • 【Premium Material】- This 12v light fixtures adopts an 11.8 inch extension cable, scratch-resistant aluminum alloy base, and high-efficiency light-transmitting PC film, which makes the LED interior light strip ultimate durability, flexibility, and efficient heat dissipation..
  • 【Easy to Install】Just connect the red wire of the enclosed trailer lights to the power "+" pole and the black wire to the power "-" pole. There are 2 surface mount methods inside this camper light, including double-sided tape and snap-on brackets and screws..
Check Stock

AUXMART Universal LED Trailer Tail Lights, 16 LED Smoked Stop Brake Turn Reverse Tail Lights Rear Combination for Jeep Wrangler YJ TJ CJ Truck Trailer Boat RV Flatbed, 12V

  • Wide Application --- This universal stop turn signal light work with most 12V vhicles.
  • Unique black bezel color with smoked lens, give you the latest look and attitude. Suitable for Truck, Trailer, SUV, RV, Camper, Boat, Flatbed, Bus, Forklifts, Pickup, Coaches and Wrangler CJ YJ TJ, etc..
  • Ultra Bright LED --- 16 ultra bright LEDs, brighter than factory lights. Provides tail lights, brake lights, turn signals and reverse lighting functionality (No license plate light).
  • 12 red for brake/turn/tail functions, 4 white LEDs for revers functions..
  • Sealed & Waterproof --- 16 LED dual color trailer tail light is made of high quality ABS housing and PC lens, and completely sealed in epoxy to resist corrosion & moisture.
  • effectively withstand the invasion and corrosion of sand, dust, dirt, water and other impact of inclement weather..
  • Easy Installation --- 3 studs can be mounted directly on any flat surface. And it with 4-color coded wire connection for easy installation.
  • Black wire is ground, white wire is reverse light, red wire is brake light, brown wire is tail light..
  • You Will Get --- 2 x 12V 16 LED combination tail lights.
  • Professional installation is strongly recommended (Not including instructions, Please note that some modification or drilling is required....
Check Stock

Lrimauix RV Awning Lights, 12V 16.4FT White RV Camping Awning Lights, Motorhome Travel Trailer Canopy Led Lights, Waterproof RV Exterior Awning Strip Lights, RV Outdoor Lights

  • 【All in One Kit】: The kit comes 1Pcs 5m Dc12v Blue Led Awning Party Light with Strong Self-adhesive Tape + Dc extension Wire + 10Pcs extra 3M mounting tape. Great to Lighting Up Your Canopy Area After Sundown, Great for BBQ, Eating, Chatting and Playing2.
  • 【Easy to Install】: Very easy to install, the lights backing with double adhesive , you can install it on any dry and clean places, We now include extra mounting brackets/fixing clips, you don't worry about the strip falling down and Wire it directly to your Porch light, light switch or any 12V battery using included 12V Power cord, red wire is Positive and black wire is Negative.
  • 【Wide Application】: This Led Awning Camping Light is perfect for RV, Camper, Motorhome, Travel Trailer, Concession Stands, and Food Trucks..
  • 【Linkable and Cuttable】: The lights can be cut following scissor marks ( every 3leds), so you can cut the length as you want, also the lights can be jointed by 2P 10mm connectors, great lights to DIY your RV.
  • 【After Sales Service】: Buy with confidence, our product provide One Year Warranty fr....
Check Stock

Partsam Thin Line 3.8" 6 LED Blue Side Led Trailer Marker Lights Sealed Clearance Light Indicators for Trucks Bus Trailer RV Camper Lorry Van UTV Marine Boat Stern Light Decoration Lights(10Pack)

  • Package includes 10 pieces 3.8 Inch Blue Led Trailer Marker Lights 6LED.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
  • Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
  • The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
  • Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on.
  • Truly many customers use them as boat marine lights, very bright.
  • The blue led strip light bar is hardwired with 2 w....
Check Stock

Partsam 10X 3.8 Amber 12V Front Side Marker 6 LED Trailer Truck Lorry Indicators Lights, Amber Rear Led Marker Trailer Parking Turn Signal Lights for Truck Bus Boat Rv Lorries SUV UTV

  • Package includes 10 pieces 3.8 Inch Amber Led Trailer Marker Lights 6LED.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
  • Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
  • The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
  • Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on.
  • We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
  • The side marker indicator light is hardwired with 2 wires and c....
Check Stock

Nilight 2PCS LED Trailer Fender Lights Pre Wired Trailer Clearance Marker Lights Amber Front Red Rear for Trailer Trucks,2 Years Warranty

  • Main Purpose: Designed in dual faces mounted on the top of fenders, work as both front and rear clearance marker lights, easily help you and other drivers behind identify the widest point of trailer, ensuring a safer drive & better protection.
  • High Visibility Light: Both left and right fend light use 14PCS led diodes, 7PCS for amber light at front and 7PCS for red lights at rear, output highly visible marker light for your enclosed trailer.
  • Simple & Tidy Installation: Lights are pre-wired with connectors and designed with extended bracket housing, offer you a quick wire connection and convenient and tidy wire routing, protecting it from exposure and damages.
  • Wires Connection: Comes with about 7” wire lead, wire gauge 22AWG, black wire with ring terminal to ground,red wire to 12V positive tail light wire.
  • Application: Can be widely used on 12V trailer trucks, freightliner, emergency vehicles and service vehicles etc.
Check Stock

Star Force: Death Mark (Star Force Space Opera Series Book 67)

  • Application: High Quality Thin-design Smoke Black Lens Amber LED Marker Light, Stylish & Functional as side marker lights, clearance lights, indicator lights, identification lights, utility lights etc..
  • Specification:12V Each Light with High Quality 6 LEDs.
  • Waterproof + Shock Proof + Vibration + Dust Proof.
  • Brightness: 120 lumen each light with 6 pcs High Quality SMD LED 50,000hrs lifetime..
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • The Black Wire is Negative. Light Dimension: 98mm x 20mm x 10mm (3.8" x 0.8" x 0.4") approx. Distance between center-to-center holes: 82mm (3.2") approx. Easy to Install with FREE Screw set included & Foam tape base..
  • Easy to Install, Long-lasting and Durable, Longer Life LED Lifetime, Minimal Maintenance Cost. Good Looking and Utility, Energy Saving, Environmental Protection, Waterproof, Reliable and Safe. Increase Safety when Driving at Night..
  • Function: Fits for most Buses/Trucks/Trailers/Lorries.
  • can be used for side marker light, rear light, indicator light, turn signal light, rear tail light, license light, Parking light etc. Anywhere you can image as well as the size fit.
Check Stock

Ltvystore 55Pcs Prewired LED Diode 5MM 12V White 7.87' LED Lamp Light Bulb Emitting Diodes &5mm LED Clip Holder Panel Mount &9V Battery Holder Clip Snap On Connector Cable Lead

  • Pre Wired Led Diode Lights are Very Bright, Energy saving,Low Power Consumption, Long Service Life: 5MM Round DC 12V Prewired LED Lamp Light Bulb Emitting Diode White, Life time is more than 5,000 hours.
  • Multifunction Pre wired Led 5MM 12V: Prewired led lights white ideal for hobbyists, RC car, boat, custom builds, DIY Car Boat Toys Parties and multiply lighting projects etc..
  • 5MM LED Holder Metal: chrome plated, fixing hex nut, suitable for use with 5mm LED, light emitting diode holder secure to hold LED firmly.
  • Environmental 9V Battery Buckle: Black red cable connection 9v battery clips connector buckle wire connecting head soft skin 9v battery buckle, great replacement for a broken battery connector on your electronic device..
  • What You Get: 30pack White Color LED Diodes Pre Wired 5MM LED Light Lamp Bulb Prewired Emitting Diodes + 15Pack 5MM LED Lamp Holder+ 10Pack 9 Volt I Type Battery Holder Clip Snap On Connector with Black Red Wire Lead.
Check Stock

Suzuki Kawasaki Yamaha Polaris 6' ATV Whip Flag RZR Dont Tread On Me

  • 【FEATURE】 - Our Off-Road Green LED Whips Lights deliver outstanding colors and illumination. And can be used in many ways including providing safety or caution in any landscape..
  • 【WEATHERPROOF】- LED light whip with pole features a thick and sturdy plastic tubing cover and protect the LED's from sand, dust, dirt, rain.
  • Waterproof and shockproof, it can work well in any topography..
  • 【Great Decoration】- These atv flag whip provide multi-color light effects, which creates a cool and stylish ambience for your vehicle, and it is one of the best decoration for vehicles.
  • 【PLUG AND PLAY】- The whip light comes with plug-and-play components, easy for installation. Lift the ring, pull to release, and plug in the whip lights to the hole of the base on a vehicle, wire the wires to auxiliary 12V or switch..
  • 【WIDE APPLICATION】- The green light whip can be installed in any position, so long as it is 12V DC power, suitable for various vehicles, such as UTV, Truck, ATV, Jeep, Dune Buggy, Sand Rail, RZR, Polaris, Go Kart, Off-Road, Golf Cart, etc.. NOTED: Please make sure connecting below 12V Vltage to keep you safe. Package Includes: 1 x LED Whip Light.
Check Stock