Reviews Wire Feeding Motors

ZENY MIG130 Gas-Less Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask AC Current 60 AMP – Commercial Grade – 110 V

  • 【Solid Construction】– ZENY MIG 130 welding machine is compact and exquisite MIG welder is constructed of high-quality durable steel, fully painted body can withstand rust and wear, a strong and durable welding machine for your long-term use.
  • 【Flux-Cored Wire, Gas Less Welder】– This welder machine uses convenient Flux-Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part. Automatic Thermal Safety Protection, Ideal for welding mild steel, stainless steel..
  • 【 Adjustable Feeding Speed】– ZENY MIG welder features 4 levels of current flow settings, by adjusting the 4 buttons for MIN/MAX,1/2. It also features a wire feeding speed adjust rotary knob, 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control.
  • 【Widely Applications】– It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specifications for This Welder】– Frequency : 50/60HZ/ Max absorbed power (KVA): 3.6/ Absorbed power 60% (KVA): 1.1, Power factor:0.9, Flux wire diameter (MM): 0.8-0.9, Max Open Voltage: 37V/ Current range (A):50-90.
Check Stock

RichYa Wire Stripping Machine Manual Scrap Wire Stripper for 0.06"-0.98" (1.5-25mm) Diameter Copper, Compact Stainless Steel Wire Stripper with Handle, Manual and Drill Powered

  • Wide Application: Our Manual and Drill Power Wire Stripper Tool can strip wire chips of different sizes, from 0.06" (1.5mm) to 0.98" (25mm) diameter. Suitable for use with common sizes of copper wire..
  • Wire Stripping Operation: Push the wire into the roller from the feeding hole, let the wire under the blade, and adjust the height of the blade. you need to adjust the feeding panel to fix the wire and prevent the wire from shifting during stripping..
  • Replaceable Blades: Our manual wire stripper has a sharp 65Mn steel blade, long serve life and can easily remove plastic and rubber insulation from waste wires. Besides, we also come with 1pcs replacement blade..
  • Durable Hand Crank: Hand crank design, made of aluminum alloy, durable and easy to operate. You can either use the handle for manual wire stripping or attach a drill for automatic wire stripping..
  • Portable Wire Stripper: The size of this wire stripper is only 15x7.5x17cm / 5.9x3x6.7 inches, it is easy to store and does not take up space. It can be used for waste copper wire recycling at any time..
Check Stock

ARKSEN MIG-130 Welding Machine Gas Less Flux Core Wire DIY Home Welder Automatic Feeding Yellow

  • Household smart welder: our ARKSEN welding machine is compact and exquisite MIG Gas welder, made of heavy duty stainless steel body, painted with....
  • Flux-cored wire-no Gas welder: our ARKSEN welding machine uses convenient flux-cored wire, self release metal-inert Gas while welding, prevent....
  • Adjustable welding speed: Our ARKSEN welding machine features a wire feeding speed adjust rotary knob. 10 levels of wire feeding speeds for your....
  • Portable design & wide applications: Our ARKSEN welding machine is perfect for welding normal thin steel and iron, perfect for home DIY and general....
  • Many complimentary necessities: The ARKSEN welding machine comes with two air-vent on the machine to help heat dissipation. The welding gun with full....
Check Stock

Tanfix Drill-Powered Wire Stripper Machine, 6 Channels 5 Carbide Blade, Stripping Wire from 7/0 to 15 gauge (0.06-0.65 inch), Efficient recycling of Copper Wire (Bright Silver)

  • ... wire,single filament wire and any other hard or soft wires. Such copper wire recycler will detach the plastic and rubber insulation from undamaged scrap wire, a must-have for copper wire recycling..
  • Wide Compatibility: With 6 Channels & 5 Carbide Blade, The adjustable feeding panel of this portable cable stripper covers every width of copper wire from 7/0 to 15 gauge (0.06-0.65inch), letting you safely and easily handle all the most common sizes..
  • Fast Stripping Speed: The Smooth wire feeding technology by a sharp alloy blade rapidly strips at a speed of 50 ft /min like butter. It will untangle mangled wires effortlessly without any slips or jams..
  • A MUST FOR COPPER WIRE RECYCLING: Get right to work and turn your scrap wires into treasure with this Tanfix Drill wire stripper, be a good assistant in the tool workplace! Reassured by its strong warranty and our usual friendly 24/7 customer service!.
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

KOOBOOK 5Pcs DRV8833 Motor Drive Module 1.5A Dual H Bridge DC Gear Motor Driver Controller Board

  • Single H bridge output current: 1.5A, can drive 2 DC geared motors..
  • Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. With low power sleep mode..
  • For DIY smart car robot, it can drive DC motors up to 1.5A and 4-wire stepper motors..
Check Stock

COLIBROX New 5pc 100w Soldering Gun Kit W/case Iron Solder Professional Style Sodering

  • SINGLE HAND OPERATION: Have you ever think about one hand doing solder feeding and soldering, and one hand hold the wire? Order our automatic soldering gun, accomplish soldering with ease. The solder wire spool designed on the body can provide the solder feeding while soldering, just pull the trigger, the solder wire will trace down the stainless steel wire pipe to where you are soldering. The soldering iron kit includes 1mm 1.76oz solder wire roll, you can start soldering once receive it..
  • HEAT UP FAST & HOT ENOUGH: The solder gun equipped a high quality ceramic core with 60w, temperature ranges from 392℉ to 896℉ (200-480 ℃), which meets your soldering need from basic home use to delicate tasks involving computer equipment, especially for beginner and hobbyist. Support tin wire diameter from 0.8mm to 1.2mm..
  • BUY 1 GET 6 - Our Soldering gun comes with Power switch and Autofeed bracket X1, Upgraded desoldering pump X1, Anti static tweezers X2, Extra iron tips X5, Soldering wire X1, totally full and perfect precision soldering kit..
  • BUILT TO LAST: Come with 5 interchangeable iron tips that have excellent heat-resistant, avoiding melt problem after a long soldering session. In addition, the stainless steel iron can withstand at least 5,000 times....
Check Stock

XYZPrinting da Vinci Jr. 1.0A Pro 3D Printer Open Filament 3D Printing Build Size: 6.9" x 6.9" x 6.9" Fully Enclosed

  • Large Print Bed: With a maximum build area of 6.9" x 6.9" x 6.9" (175 x 175 x 175 mm) the printing possibilities are HUGE!.
  • Advanced Extruder Technology: Choose from a wide range of materials such as PLA, PETG, Tough PLA, XYZcarbon fiber*, and Metallic PLA* filament..
  • Auto Feeding: Easily install filament with the auto feeding function to ensure filament is loaded correctly and ready for use..
  • Frustration Free Calibration: The da Vinci 1.0 A Pro has a 9 point auto-calibration system to ensure easy setup and maintenance..
  • Advanced Motor Technology: Four motors increase the speed and accuracy of your prints..
Check Stock

Aivituvin Hamster Cage Wooden Hamster House Rat Cage with Chewing Toy Hideout Seesaws Food Bowl 3 Tier Small Animal Habitat-Leakproof Plastic Tray

  • 【Fully Accessorized】Hamster cage includes chewing toy,feeding bowl, hideouts,seesaws,ramps.3 levels provides large running space..
  • 【Deeper Plastic Tray】The deepened leak-proof drawer will never leak or go moldy, and super easy to pull out back and forth..
  • 【Wire Mesh Side Walls】Hamster house with two wire mesh side walls allow to attach water bottle and exercise wheel for daily needs..
  • 【Safe and Stable】 1/2 inch metal wire spacing, solid wood platforms & ramps make small animals' feet cannot get stuck..
  • 【Open Top and Front Panel】Front acrylic panel opens for feeding.Mesh top opens provides proper ventilation.Overall size:39"L X 20" W X 24"H..
Check Stock

Kailh White Owl V2 Switch RGB SMD Clicky 70g Switches for Mechanical Keyboard mx stem 5pin White Grey (White Owl Switch x70)

  • MOMENTARY SWITCH: (spring action) only engages while the user is pushing the handle. This switch will spring back to off position when handle is released..
  • WIRING: Please refer to your motors wiring instructions on how to wire switch.
  • Max 1.5 HP at 120Vac Motors or Max 2 HP at 240Vac Motors.
  • Highly visible red handle with enclosure that is IP65 rated..
Check Stock