Reviews Wiper Arm Extractor For Heavy Duty Trucks

OTC 4676 Windshield Wiper Puller

Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks.
Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal.
Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm.
Tool features a throat depth of 1-1/16 inches.
foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter.
Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance.

Ideal tool to remove stuck on wiper arms that haven't been taken off for years..
The heavy duty construction with locking feature allows the tool to be fastened securely to the wiper arm before commencing the pull.
The sprung loaded arm ensures a perfect grip, pulling the wiper arm squarely off every time..
It can remove bolted-on windshield wiper arms that fit over a tapered spline. Can also be used for removing over tight battery terminals and some alternator bearings..
SPECS: With swivel mounted thrust bearing and tommy bar Maximum opening: 36mm Maximum pull height: 27mm.

This TMC Dual Windshield Wiper Pantographic Arm allows the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield..
Adjustable Marine Wiper Arm 11-1/4 inches to 15 inches (286mm to 381mm). These TMC arms are used on standard and heavy-duty motors..
Made of AISI316 Stainless Steel corrosion-resistant and Black Matte coated. It comes with a Hex Key to be Adjust..
Requires a heavy-duty motor with a 9/16 in (14mm) shaft..
For Use with Five Oceans Code FO-746 (Wiper Motor).. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
Coast to park with adjustable right or left self parking. RF shielded circuitry.

The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
Coast to park with adjustable right or left self parking. RF shielded circuitry.

...ovides adjustable park position from left to right.
DIY Wiper Motor Replacement: this genuine windshield motor is easy to install and comes with gears and cables for easy fitting. The motor ncludes 2-speed wiper switch for managing speeds of wiper blades. Easy to fit, the motor can be used for a wide variety of trucks, equipment, tractors, boats, buses..
Replacement Wiper Motor Use: Wexco motor for wipers helps to accelerate the performance of most types of wiper blades. The manual speed feature helps to control speeds based on cleaning requirements of windshields and provides manual adjustment of wiping angle for maximum range of cleaning, up to 110 degrees.
Salient Features: Wexco windscreen wiper motor comes with 2.5-inch shaft and the 12v wiper motor helps in hassle-free speed adjustment, from 40rpm to 60rpm. The Wexco wiper motor is equipped with 2-speed wiper switch for easy adjustment of wiper angles.

Pantographic arms allow the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield.
Adjustable Marine Wiper Arm extends from 13-1/2 to 17-3/8 inch ( 345mm to 440mm). Suitable for standard and heavy-duty motors.
Made of AISI316 Stainless Steel and Black Coated to ensure reliable performance and corrosion resistance.
Requires a heavy-duty motor with a 9/16 inch (14mm) shaft.
Includes a Hex Key to be adjusted. Compatible with model FO-746. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

32 Inch Wiper Blade for Class A RV motorhomes, motorcoaches, and buses with WIDE SADDLE Mount Wiper arm.
Fits Wide Saddle Mount 0.535" and 0.640" (13.6mm and 16.3mm) Wiper Arms, Not for Narrow Saddle or 21mm Saddle.
Heavy Duty Frame and Quality Natural Rubber Refill for Lasting Performance, Comes with two Rubber Refills to Renew Wiper Blade Economically.

TMC wiper arms are ideal for standard and heavy-duty motors. Adjusts from 6 to 11 inches.
Made of high quality AISI316 Stainless Steel to ensure corrosion resistance and increase efficiency in keeping the glass clean.
Easily connects wiper motor to wiper blade for ultimate performance. Compatible with Five Oceans model 745.
Easy installation. Single arm per package. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

TMC wiper arms are ideal for standard and heavy-duty motors. Adjusts from 8 to 14 inches.
Made of high quality AISI316 Stainless Steel to ensure corrosion resistance and increase efficiency in keeping the glass clean.
Easily connects wiper motor to wiper blade for ultimate performance. Compatible with Five Oceans model 745.
Easy installation. Single arm per package. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.