Reviews Wing Type Grille Lamp

KICKER Powersports 10PS52504 5.25 Harley Davidson Motorcycle Speakers PS5250

  • ...Bridge-mounted tweeters suspended over the midbass cone to limit extreme vibration. At a mere 12 ounces per speaker, a bikes center of gravity remains low for proper handling.
  • Weather-proof materials designed to withstand the outdoor elements. Includes specific replacement grilles for Harley-Davidsons Bat-wing fairing. New 4-Ohm model for Victory bikes and early-model Harley-Davidson's. Click Here To View The User Manual (Link Opens In New Window). PS52504 Harley-Davidson Kicker Powersports 5.25 4-Ohm Coaxial Speakers. 100 Watts Peak. 50 Watts RMS.
  • Woofer: 5.25" (13.3cm). Tweeter: 3/4" (20mm). Impedance:4 Ohms. Weight: 12.6oz (358 g). Sensitivity: 88.3 dB. Frequency Response: 60 - 20,000 Hz. Mounting Hole Diameter: 4 7/8 in (12.4 cm). Mounting Depth: 2 3/16" (5.6cm). Grilles Included: Yes - Fits Harley Bat Wing fairing. All other fairings must use factory grille..
  • Grilles Included: Yes - Fits Harley Bat Wing fairing. All other fairings must use factory grille..
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

Completed Set 6 1/2″ LED Headlight with Halo Ring + Mesh Grill Cover + Side Mount Bracket

  • Package includes: 1X 6.5″ Motorcycle Retro Clear Lens Head light + 1X 6.5″ Head lamp Grille + 2x Headlight Bracket + 2X Mounting Screw.
  • Universal fit most bikes with a side mounted single 6 1/2 inch Headlight.
  • Fits most custom cruiser chopper bobber or cafe racer with 35mm-43mm Diameter: fork tubes.
  • Waterproof & Weatherproof and 100% Rust Free. The headlight can be converted to the high or low beam.
Check Stock

Bumper Grille Compatible with 2000 Mercedes Benz S430 S500 Center Textured Black Plastic

  • DESCRIPTION- This 1932 Ford Car Steel Grille Shell is a perfect replacement for your worn or rusted stock piece..
  • CONDITION- Made of High Quality Stamped Steel. Part Type: Grille Shells. Grille Shell Material: Stainless Steel Grille. Shell Finish: Black Grille. Material: Stainless Steel..
  • APPLICATION- Compatible with 1932 Ford Model B/BB/18..
  • EASY TO INSTALL- Professional Installation is Highly Recommended..
  • PACKAGE LISTING- 1 X Grille Shell. 1 X Grille Insert. Does NOT come with Crank-Hole. Radiator Cap Hole: No Hardware not Included. Instruction is NOT included..
Check Stock

Wing Grip Knob, M5, Int, 0.94, NG

  • Price For: Each Includes: - Standards: - Finish: Matte Fits Hand Wheel Dia. (In.): - Tap Type (In.): - Knob Type: Wing Grip Item: Mini Wing Knob Style: Novo Grip(R) Type: Internal Thread Knob Type: Wing Grip Material: Thermoplastic Overall Height: 0.59 Thread Size: M4 Base Dia. (In.): - Overall Length: 0.59".
  • Country of Origin (subject to change): Germany.
Check Stock

Mini Wing Knob, Int, M4, 0.59

  • Price For: Each Includes: - Standards: - Finish: Matte Fits Hand Wheel Dia. (In.): - Tap Type (In.): - Knob Type: Wing Grip Item: Mini Wing Knob Style: Novo Grip(R) Type: Internal Thread Knob Type: Wing Grip Material: Thermoplastic Overall Height: 0.59 Thread Size: M5 Overall Length: 0.59" Country of Origin (subject to change): Germany.
Check Stock

Mini Wing Knob, Ext, M8, 0.99 In, 1.57

  • Price For: Each Includes: - Standards: - Finish: Matte Fits Hand Wheel Dia. (In.): - Tap Type (In.): - Knob Type: Wing Grip Item: Mini Wing Knob Style: Novo Grip(R) Type: External Thread Knob Type: Wing Grip Material: Thermoplastic Overall Height: 2.16 Screw Length: 1.57" Overall Length: 2.16" Thread Size: M8.
  • Country of Origin (subject to change): Germany.
Check Stock

Mini Wing Knob, Ext, M5, 0.78 in, 1.38

  • Price For: Each Includes: - Standards: - Finish: Matte Fits Hand Wheel Dia. (In.): - Tap Type (In.): - Knob Type: Wing Grip Item: Mini Wing Knob Style: Novo Grip(R) Type: External Thread Knob Type: Wing Grip Material: Thermoplastic Overall Height: 1.38 Screw Length: 0.78" Overall Length: 1.38" Thread Size: M8.
  • Country of Origin (subject to change): Germany.
Check Stock

Mini Wing Knob, 1/4-20, Ext, 0.78, 1.74, NG

  • Price For: Each Includes: - Standards: - Finish: Matte Fits Hand Wheel Dia. (In.): - Tap Type (In.): - Knob Type: Wing Grip Item: Mini Wing Knob Style: Novo Grip(R) Type: External Thread Knob Type: Wing Grip Material: Thermoplastic Overall Height: 1.77 Screw Length: 1.18" Overall Length: 1.77" Thread Size: M6.
  • Country of Origin (subject to change): Germany.
Check Stock