Reviews Wind Blade

AUECOOR 1480 Watts 48V Solar Wind Hybrid Kit for Home Boat RV Camping: 4 x 120W monocrystalline Flexible Solar Panel + 1000W Wind Turbine + Charge Controller+Accessories.Easy Installation

  • [Upgraded 5-blade Wind Turbine]:Starting with 2.5m/s Low wind speed,Low vibration during working.
  • High wind energy efficiency,The efficiency of the upgraded 5-blade wind generator is higher than the 3-blade wind generator..
  • [Aluminum Alloy Rotating Body]:With yaw adjustment system, automatically read the wind position, the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle..
  • [Durable]:The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent water resistance and sand resistance..
  • [Versatile]:Used in various off-grid applications that include 12 volts arrays, water pumping systems, signaling systems and other off-grid applications. Great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins..
  • [Extremely Flexible]:Good bendability.This panel is capable of meeting a wide range of applications,even in the place where standard panels may be inconvenient to mount,such as on the curved roof,or any other irregular surface..
Check Stock

Wind Fairing for Low Profile Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND FITTING: A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

2200 Watts Solar Panel Wind Turbine Generator with 5 Blade Kit Hybrid System:12pcs 100W ETFE Flexible Monocrystalline Solar Panel For RV Curvy surface,1000W Wind Turbine off-grid system for home use

  • [The Advantages of Solar Wind Energy System]:In the case of both wind and sun, the two play a role at the same time, realizing all-weather power generation function, which is more economical and practical than single wind and solar energy..
  • [Durable]:ETFE film is weatherproof and is also heat,corrosion and UV resistant.Featuring with honey-comb structure which enhance 10% natural lighting.Higher efficiency than the traditional panel..
  • [High Efficiency]:ETFE solar panel have a better light penetration percentage of 95%.The transparent dots on the surface can gather sunlight from different angles.This unique feature can sufficiently utilize sunlight and increase solar conversion rate.The matrix distributed dots can cause refraction and utilize sunlight twice thus increase conversion rate..
  • [Aluminum Alloy Rotating Body]:With yaw adjustment system, automatically read the wind position, the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle..
  • [Upgraded 5-blade Wind Turbine]:Starting with 2.5m/s Low wind speed,Low vibration during working.
  • High wind energy efficiency,The efficiency of the upgraded 5-blade wind generator is higher than the 3-blade wind generator..
Check Stock

Kinetic 3D Metal Outdoor Garden Decor Wind Spinner (Mandala)

  • ?【 PERFECT GIFTS】: On various holidays and birthdays of family and friends, this stylish windmill is also a great gift, which should surprise them!.
  • ?【SPECIAL DESIGN PERFECT GARDEN DECORATION】: Each blade of this yard spinner is designed to spin in different directions,The metal windmill sparkles in the sun, and you can enjoy your garden ornament..
  • ?【FUNCTIONALITY & ANTIQUE CHARM】: STABLE, STURDY WITH MODERN.Many wind spinners outdoor come with a single blade that spins in one direction. Our solar wind spinner has a solid metallic construction with dual wind motion..
  • ?This garden spinner is constructed with durable iron metal components , bright metallic and reflective painting creates a visual sensation in the garden..
  • ?Our kinetic metal wind spinners come which is built to withstand all weather, sturdy and durable for windy days.Our solar wind spinner has a solid metallic construction with dual wind motion..
Check Stock

AUECOOR 24 Volts 1360 Watts Solar Panel Wind Turbine Hybrid System Kit:8pcs 120W Glass Monocrystalline Solar Panel +400W Wind Turbine Generator+Accessories

  • 【Reliable】Advanced encapsulation material with multi-layered sheet laminations enhance cell performance and provide a long service life..
  • 【Durable】 positive output tolerance (0-3%).
  • withstands high winds (2400Pa) and snow loads (5400Pa)..
  • 【Installation Ready】Pre-drilled holes on the back of the panel allow for fast mounting and securing. Pre-drilled holes included for grounding. Compatible with different Renogy mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts..
  • 【Versatile】Used in various off-grid applications that include 12 volts arrays, water pumping systems, signaling systems and other off-grid applications. Great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins..
  • 【Upgraded 5-blade Wind Turbine】Starting with 2.5m/s Low wind speed,Low vibration during working.
  • High wind energy efficiency,The efficiency of the upgraded 5-blade wind generator is higher than the 3-blade wind generator..
Check Stock

Pikasola Wind Turbine 200W max 220W 12V 5 Blade Wind Vertical Axis Generator 3 Phase AC Permanent Magnet Generator Wind Turbine Kit with Controller for Hybrid Wind Solar System

  • 1.（-Safety-）: 5-leaf double-axis vertical blade design, which looks like a Red lantern. Safety factor is high due to blades be fixed inside by a flange, then not risk of blade falling off..
  • 2.（-High Wind Energy Utilization-）: Wind blades adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. Especially with optimized aerodynamic shape and structural design, has a High wind energy utilization. Wind turbine can start by breeze and adapt to 360° wind, no yaw system is needed..
  • 3. (-Quietly-): The vertical wind turbine is quieter than horizontal axis turbine. Double bearings make it more stable and not easy to shake when wind generator is running. Silent rotation, suitable for home, boat, marine, monitoring use, solar and wind hybrid street lighting system..
  • 4. (-Excellent Generator-): Permanent magnet three-phase alternating current can reduce the resistance torque of wind generator effectively. Also make the wind wheel and the generator matching better and then running more reliability..
  • 5. (-Installation convenience-): Vertical axis wind turbine can use a screw pile foundation. It is a cost reduction and easy&quick installation compare with concrete foundation installation. Screw pile foundation can be fully recycled at ....
Check Stock

Wind Fairing for Rack / 1475mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack/ 1345mm/1425mm (W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1267mm (49.9") L x 2.5mm (0.1") W x 176mm (6.9") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

VEWOGARDEN Large Outdoor Metal Wind Spinners, 360 Degrees Swivel Wind Sculpture Yard Art Decor for Patio, Lawn & Garden 66 * 15.8 Inches

  • ... 【Large Size and Good Quality】 4(2 large+ 2 small layer yard spinner) wind sculptures & spinners is made of durable and anti-rust paint metal. Extra large 15.8" wide and 66" high Vewogarden wind spinners has a solid metallic construction with easy spinning blade which smoothly rotates on sealed bearings..
  • 【Flexible Rotate】Metal wind sculptures having double sides blade can spin independently smoothly on sealed bearings, through reversible dual ball bearings, the pair of blades spin in opposite directions simultaneously. Waterproof wind spinner with the durable paint on the blades surface, can withstand most weather conditions..
  • 【Easy Installation】 Large wind spinner has a simple but solid metallic construction, very easy to install, the whole process only cost you 2-3 minutes. You can insert the garden wind spinner into the soil or grass easily without any tool..
  • 【Yard Art Decoration】Metal stakes wind sculptures can be the first gift choice. Providing years of entertainment to you, family and friends as well as a wonderful addition to your garden a....
Check Stock