Reviews Wide Range Of Filament Materials Compatible

Open Smart Tag for XYZPrinting 3D Printers Compatible with 3rd Party Filament Open Source 3D Printing Filaments with Different Materials PLA PETG ABS Carbon

  • Print Third Party Filament: Open up your printer to materials from different brands.
  • Quick Installation: Install on spool, register with printer and ready to go.
  • Spool Size Versatility: From 600g to unlimited / Compatible with any size spool of filament.
  • Compatible with da Vinci nanoSeries, miniSeries, Jr. Series, and Color Series printers..
Check Stock

IdeaFormer-3D 3D Printer Filament Welder Connector,Filament Splicer Tool 1.75mm,Connect Broken Filament 1.75mm Filament Connector Filament Tool for 3D Printer DIY Multicoloured Filament (Black)

  • Refuse filament waste: If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a model,it can be connected to continue printing..
  • Print models in multiple colors:Different colors of the same filament can be connected to print out a multi-level model.
  • Suitable for:Wide range of applications for most 1.75mm filaments: PLA/ABS/PETG/PC/PP/PVB/HIPS, etc.
  • Filament Welder Connector material:All-metal 3d printer filament connector using all-metal materials, high-quality, innovative design, easy to use.
  • Note: Light wire exposure to the air for a long time will often be water loss and brittle. To prevent the filament from becoming brittle, seal it.
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Transparent,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Luminous Blue,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent Orange,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent red,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Luminous Yellow,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent Magenta,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Yellow,1.75mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament Dryer Box, SUNLU FilaDryer S2 for 3D Printing, 360° Surround Heating, Touch Screen, Real-time Humidity Display, Dryer Box for Nylon PA ABS PLA PETG Filament 1.75/2.85/3.00mm, Black

  • 【Real-time humidity detection, Visualization of dry conditions】 Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. The change of the LED lamp ring show the working status of dryer box, visualization of the drying process..
  • 【Compatible with 99% of 3D filament, including Nylon/PA/PC filament】 Compatible with all the mainstream 3D filament brands and all standard filament diameters 1.75mm/2.85mm/3.00mm.
  • Works perfectly with PLA、PLA+、PETG、TPU、ABS etc. Can dry Nylon/PA/PC filament and other high-end filament..
Check Stock